Argos Alicia 171/5875 Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 82cm

Depth - 49.5cm

Height - 182.5cm

Alicia - 2 Door Robe

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 2 - 10/02/14

Important - Please read these instructions fully before starting assembly

ALR2941

171/5875

145/1256

Issue 2 - 10/02/14 -

Note added at Step11 to remove protective film.

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 44kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: It is

recommended that this unit is

secured to a wall using the

bracket supplied.

• Dispose of all packaging

carefully and responsibly.

Components - Panels

Please check you have all the panels listed below

80%

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Top (D2667A)

(821 x 495mm)

Left Side (D2668A)

(1808 x 493mm)

Right Side (D2669A)

(1808 x 493mm)

Door (D2672A)

(1744 x 389mm) x 2

Back (X1761-813)

(1761 x 813mm)

Base (D2670A)

(787 x 470mm)

Plinth (D2671A)

(787 x 58mm)

Hanging Rail (FHR779)

(779mm long)

Please check you have all the fittings listed below

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

A B C

D E F

G H

Rule

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

J K L

Bracket (F327) x 1

Hinge plate

(F523) x 6 Hinge (F522) x 6

Tools required

Rule

ScissorsSquare

Spirit

level

Hammer Bradawl

Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Step

ladder

Ruler - Use this ruler to help correctly identify the screws

13mm Screw (F79) x 1 13mm Screw (F63) x 14

Electric drill

(only use

when drilling

into walls)

Large locking

nut (F900) x 6

Wooden dowel (F22) x 6 Metal dowel (F901) x 6

Nail (F51) x 33

Rail holder

(F1014) x 2

25mm Screw (F50) x 4

Handle (F319) x 2

40mm Screw (F910) x 4

Finished

front edge

Prepare the right side

Tap a wooden dowel

into the right side .

Screw 3 metal dowels

into the right side .

Fit 3 hinge plates onto

the right side .

Push a rail holder into

the right side and

secure with screw .

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Step 1

Prepare the left side

Tap a wooden dowel

into the left side .

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

Screw 3 metal dowels

into the left side .

Note: Tighten the metal

dowels up fully against

the panels.

Fit 3 hinge plates onto

the left side , making

sure that the slot is

facing towards the

finished front edge.

Push a rail holder into

the left side . Make

sure that it is fitted

straight, in line with the

panel edges and then

secure with screw .

Step 2

Push a rail holder into

the hole shown. Make

sure that it is fitted

straight, in line with the

panel edges and then

secure with screw .

Finished

front edge

10mm

Finished

front edge

Finished

front edge

Assembly Instructions

Step 3

Step 5

Step 4

Prepare the base

Tap 2 wooden dowels

into the base .

Insert 4 large locking

nuts into the

base .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

plain

chipboard

surface

Finished

front edge

Fit the base to the

right side

Push the base onto

the right side .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the base .

Note: Turn the large

locking nuts as far as

they will go - more than

1/2 a turn.

plain

chipboard

surface

Prepare the plinth

Tap 2 wooden dowels

into the plinth .

Insert 2 large locking

nuts into the

plinth .

Plain chipboard

surface

Assembly Instructions

Step 6

Fit the plinth

Push the plinth onto

the right side .

Use a screwdriver to

tighten the large locking

nut fitted to the plinth

. .

Fit the left side

Push the left side

onto the base and

the plinth .

Use a screwdriver to

tighten the 3 large

locking nuts fitted to

the base and the

plinth .

Step 7

Note: Support the plinth

until the left side has been

fitted in the next step.

Assembly Instructions

Step 8

Step 9

Fit the top

Push the top onto

the assembly and secure

with 4 screws .

Fit the back

a: Square up the unit by

making sure that

measurement x to x

equals y to y.

b: Place the back

onto the unit.

Nail around the

outside edges of the

back .

Note: Nails should be

spaced about 150mm

apart.

Stand the unit up for

the next step.

The measurement from top corner X to bottom corner X must be

equal to the measurement from top corner Y to bottom corner Y

Warning: The

unit is heavy.

Lift with care.

Assembly Instructions

Step 10

Step 11

Fit the hanging rail

Push the hanging rail

into the rail holders

fitted to the side panels.

Prepare the 2 doors

Push fit 3 hinges into

each of the 2 doors .

Secure each hinge with

2 screws .

Note: Before securing

with the screws, make

sure that the hinges are

positioned at 90 degrees

with the edge of the

door.

x 2

Note: Remove the protective film

from the doors before Step 12.

Assembly Instructions

Step 12

Fit doors and handles

Note: The easiest way to

attach each door is

to fit the top hinge first,

then align and fit the

other hinges.

a: Push the hinge

onto the front part of the

hinge plate .

The recess at the bottom

of screw B goes into the

slot in the hinge plate.

b: Keep the hinge

FLAT against the hinge

plate as you slide it

across as far as it will go.

Tighten screw A.

c: The hinge must be

flat against the hinge

plate prior to any

adjustment.

d: The hinge must

NOT be AT AN ANGLE

to the hinge plate

when assembled.

This would indicate that

the recess at the bottom

of screw B had not

located in the slot in the

hinge plate and the hinge

would not be secure.

Remove the hinge from

the hinge plate and then

re-assemble being

careful to follow

instructions a-c.

e: Attach a handle to

each door using 2

screws .

a: b:

c: d:

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Sparkle Bedienungsanleitung

Argos

Argos Matrix 610/8267 Bedienungsanleitung

Argos

Argos Cheval 147/2204 Bedienungsanleitung

Argos

Argos Eden 412/3062 Bedienungsanleitung

Argos

Argos SCHREIBER 6324852 Bedienungsanleitung

Argos

Argos Wow Leo 167/9605 Bedienungsanleitung

Argos

Argos HOME Bedienungsanleitung

Argos

Argos Austen HOME 893/6585 Bedienungsanleitung

Argos

Argos Miami 654/4986 Bedienungsanleitung

Argos

Argos EMPEROR 6031561 Bedienungsanleitung

Argos

Argos Home Arlon 452/8454 Bedienungsanleitung

Argos

Argos York 161/6297 Bedienungsanleitung

Argos

Argos Atlas Internal Cube 339/5176 Bedienungsanleitung

Argos

Argos Marlow 424/2929 Bedienungsanleitung

Argos

Argos hygena 147976413 Bedienungsanleitung

Argos

Argos Chunky 418/5897 Bedienungsanleitung

Argos

Argos 2 Door 3 Drawer Sideboard Bedienungsanleitung

Argos

Argos Malvern 390/9641 Bedienungsanleitung

Argos

Argos HOME Crystal II 3ft Frame Bedienungsanleitung

Argos

Argos Arvika 357/6823 Bedienungsanleitung

Argos

Argos Napoli 600/6259 Bedienungsanleitung

Argos

Argos Stroud scroll back pair chair 549/5737 Bedienungsanleitung

Argos

Argos SAVANNA 476/9086 Bedienungsanleitung

Argos

Argos Murano 330/8448 Datenblatt

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung