Argos Alicia 188/8379 Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 132cm

Depth - 49.5cm

Height - 182.5cm

Alicia - 3 Drawer 3 Door Robe

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 3 - 10/02/14

Important - Please read these instructions fully before starting assembly

ALR2944

188/8379

146/8184

Issue 2 - 02/01/14 - The Small Upright and the Horizontal were duplicated on the panels pages.

The ones shown page‘2’ have been deleted and the numbers for the Top, Base, Centre Door, Large Door, Small Back and Large Back have been altered.

Issue 3 - 10/02/14 Added 12 wedgefixes to the kit.

Code for wrap back changed to W468-115BCK.

Note added at Steps 5 and Step 27 to remove protective film.

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 83kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 1, 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: It is

recommended that this unit is

secured to a wall using the

bracket supplied.

• Dispose of all packaging

carefully and responsibly.

Components - Panels

Please check you have all the panels listed below

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Drawer Front (D2666A)

(495 x 189mm) x 3 Drawer Base (T479-327)

(479 x 327mm) x 3

Left Drawer Side (W330-115LH)

(330 x 115mm) x 3

Right Drawer Side (W330-115RH)

(330 x 115mm) x 3

Horizontal (D2677A)

(516 x 468mm)

Small Upright (D2678A)

(516 x 468mm)

Shelf (D2680A)

(378 x 468mm) x 3

Hanging Rail (FHR884)

(884mm long)

Plinth (D2679A)

(1285 x 58mm)

Drawer Back (W468-115BCK)

(468 x 115mm) x 3

Components - Panels

Please check you have all the panels listed below

11 12 13

80%

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Left Side (D2668A)

(1808 x 493mm)

Right Side (D2674A)

(1808 x 493mm)

Top (D2673A)

(1319 x 495mm)

Base (D2675A)

(1285 x 470mm)

Large Upright (D2676A)

(1735 x 469mm)

Large Door (D2672A)

(1744 x 389mm) x 2

Small Back (X1761-398)

(1761 x 398mm)

Back (X1761-912)

(1761 x 912mm)

14 15

Large Back (X1761-912)

(1761 x 912mm)

Centre Door (D2682A)

(1168 x 495mm)

17 18 19

Please check you have all the fittings listed below

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

A B C

D E F

G H

J K L

Bracket (F327) x 1

Hinge plate

(F523) x 9 Hinge (F522) x 9

Large locking

nut (F900) x 10

Wooden dowel (F22) x 11 Metal dowel (F901) x 16

Nail (F51) x 40

Rail holder

(F1014) x 2

40mm Screw (F910) x 10

Small locking

nut (F3) x 6

P Q

Handle (F319) x 6

9mm Screw (F74) x 6

9mm Screw (F73) x 12

Drawer runner (F1004) x 6

13mm Screw (F79) x 1

25mm Screw (F50) x 12

13mm Screw (F63) x 20

Back holder (F276) x 5

Nail screw (F277) x 5

Shelf stud (F110) x 12

Knock-in Peg (F171) x 12

Tools required

Rule

Scissors Square

Spirit

level

Hammer Bradawl

Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Step ladder

Electric drill

(do not use for

fitting screws)

Wedgefix (F639) x 12

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Step 1

Step 2

Prepare the 3 drawer

fronts

Screw 2 metal dowels

into the holes shown on

the back of the drawer

front .

Note: Tighten the metal

dowels up fully against

the panels.

Prepare the drawer

sides

Insert a small locking

nut into the hole

shown on the left drawer

side and right drawer

side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Step 3

Attach the drawer

sides to the drawer

front

Push the left drawer side

. and right drawer side

. onto the back of the

drawer front .

Turn the small locking

nuts on the left

drawer side and right

drawer side .

Note: Turn the locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

Groove

Note: Due to the manufacturing process, the holes for the

locking nut can be on either surface of the drawer sides.

Note: The locking nuts can be on either surface of the drawer sides.

Make sure that the groove is on the inside, as shown.

x 3

x 3 x 3

x 3

Assembly Instructions

Step 4

Fit the drawer base

Slide the drawer base

down the grooves in the

drawer sides and

and down into the

groove in the drawer

front .

Step 5

Fit the drawer back

between the drawer

sides and .

Make sure that the

drawer base fits into

the groove in the drawer

back .

Hold the drawer back

in position and tap the

knock-in pegs

through the holes in the

drawer sides and .

Step 6

2 3

Attach the handles

Attach a handle to

each drawer front

using 2 screws .

x 3

Note: Remove the protective

film from the drawer fronts

before starting Step 6.

Assembly Instructions

Step 7

Finished

front edge

Finished

front edge

Finished

front edge

Finished

front edge

Prepare the small

upright

a: Place 3 runners on

the small upright as

shown. Slide back the

top of runner and use the

2nd hole from the front

to fit the 1st screw .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the small upright .

c: Tap 2 wooden

dowels into the small

upright .

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

Insert 2 large locking

nuts into the small

upright .

Note: The arrow on the

locking nuts must point

towards the hole in the

edge of the panel.

10mm

Step 8

Fit the wedgefixes

Turn the drawer

assemblies over.

Slide a wedgefix into

the small groove in the

drawer front , drawer

back and drawer

sides and , as

shown.

Once in place, tighten up

the screws.

2 3

x 3

Assembly Instructions

Step 9

Prepare the horizontal

Tap a wooden dowel

into the horizontal .

Screw 2 metal dowels

into the horizontal .

Insert 2 large locking

nuts into the

horizontal .

Finished

front edge

Plain chipboard

surface

Finished

front edge

Finished

front edge

Fit the small upright

to the horizontal

Push the small upright

onto the horizontal .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the small upright .

Note: Turn the large

locking nuts as far as

they will go - more than

1/2 a turn.

Plain

chipboard

surface

Step 10

Assembly Instructions

Step 11

Finished

front edge

Finished

front edge

Finished

front edge

Prepare the large

upright

a: Push a rail holder

into the large upright .

Make sure that it is fitted

straight, in line with the

panel edges and then

secure with screw .

Tap 2 wooden dowels

into the large upright .

Place 3 runners onto

the large upright .

Slide back the top of

runner and use the 2nd

hole from the front to fit

the 1st screw .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the large upright .

Fit 3 hinge plates onto

the large upright ,

making sure that the slot

is facing towards the

finished front edge.

Screw 2 metal dowels

into the large upright .

Assembly Instructions

Step 12

Finished

front edge

Finished

front edge

Finished

front edge

Step 13

Fit the horizontal to

the large upright

Push the horizontal

onto the large upright .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the horizontal .

Prepare the base

Tap 2 wooden dowels

into the base .

Insert 4 large locking

nuts into the

base .

Step 14

15 Finished

front edge

plain

chipboard

surface

Fit the base

Attach the base to

the small upright and

large upright using 4

screws .

Dieses Handbuch passt für folgende Modelle

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Marcell 4ft6 Frame Bedienungsanleitung

Argos

Argos Newport Chest Pack Bedienungsanleitung

Argos

Argos Alex Headboard 634/1880 Bedienungsanleitung

Argos

Argos White Tongue & Groove 2 Drawer Unit Bedienungsanleitung

Argos

Argos salisbury 338/4400 Bedienungsanleitung

Argos

Argos BRADLEY 2581747 Bedienungsanleitung

Argos

Argos Home 482/2844 Bedienungsanleitung

Argos

Argos 389/6039 Bedienungsanleitung

Argos

Argos SWIVEL Bedienungsanleitung

Argos

Argos Mendoza 228/2723 Bedienungsanleitung

Argos

Argos Tolga 323/6132 Bedienungsanleitung

Argos

Argos Malibu Bedienungsanleitung

Argos

Argos Single Metal Futon Bedienungsanleitung

Argos

Argos HOME Chesterfield Sofa Handbuch

Argos

Argos Denver 352/9045 Bedienungsanleitung

Argos

Argos Athina 608/0804 Bedienungsanleitung

Argos

Argos SAN DIEGO 408/8365 Bedienungsanleitung

Argos

Argos REAGAN FAB LH CRN CHAISE SOFABED CHARCOAL... Bedienungsanleitung

Argos

Argos Kids Sywell Bedienungsanleitung

Argos

Argos 837/9221 Bedienungsanleitung

Argos

Argos 1926925 Bedienungsanleitung

Argos

Argos Abigail 3 Bedienungsanleitung

Argos

Argos Alto hygena 404/3733 Datenblatt

Argos

Argos San Diego 343/7058 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung