Argos Camden 244/3012 Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 80cm

Depth - 49.5cm

Height - 200.5cm

Camden - 2 Door Tall Robe

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 2 - 25/03/14

Important - Please read these instructions fully before starting assembly

ALR2988

244/3012

227/6117

Issue 2 - 25/03/14

Remove old cat codes and add new ones

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 47kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: It is

recommended that this unit is

secured to a wall using the

bracket supplied.

• Dispose of all packaging

carefully and responsibly.

Components - Panels

Please check you have all the panels listed below

80%

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Left Side (DF1A1)

(1970 x 491mm)

Right Side (DF2A1)

(1970 x 491mm)

Top (DF3A1)

(796 x 492mm)

Door (DF7A1)

(1868 x 357mm) x 2

Horizontal (DF4A1)

(722 x 473mm) x 2

Back Rail (DF6A1)

(722 x 130mm)

Back (X1882-740)

(1882 x 740mm)

Hanging Rail (FHR715)

(715mm long)

Plinth (DF5A1)

(722 x 96mm)

Please check you have all the fittings listed below

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Rule

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Tools required

Rule

ScissorsSquare

Spirit

level

Hammer Bradawl

Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Step

ladder

Ruler - Use this ruler to help correctly identify the screws

Electric drill

(only use

when drilling

into walls)

B C

D E F

G H I

Nail (F51) x 35

Hinge plate

(F523) x 8

Rail Holder

(F891) x 2 13mm Screw (F63) x 20

Hollow core

locking nut

(F892) x 4

Small metal dowel

(F893) x 4

19mm Screw (F461) x 4

Metal dowel (F901) x 12

Large locking

nut (F900) x 12

Hinge (F522) x 8

Wooden dowel (F22) x 8

Handle (F309) x 2

J K

Bracket (F327) x 1

13mm Screw (F79) x 1

Finished

front edge

Finished

front edge

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Step 1

Prepare the left side

a: To fit the rail holder

. , screw through the

top hole with screw

and into the shallow

mark hole drilled in the

left side . Make sure

that it is fitted straight, in

line with the panel edges

and then fit another

screw using the lower

hole.

Screw 6 metal

dowels into the holes

on the left side .

Note: Tighten metal

dowels up fully against

the panel.

b: Fit 4 hinge plates

onto the left side ,

making sure that the slot

is facing towards the

finished front edge.

Push 2 hollow core

locking nuts into the

left side , making sure

that they are flush

against the panel’s

surface.

Using a hammer, tap in

the pin on the hollow

core locking nut .

Note: The pin should be

tapped in flush with the

top surface of the hollow

core locking nut . b:

B B

Assembly Instructions

Step 2

Prepare the right side

a: To fit the rail holder

. , screw through the

top hole with screw

and into the shallow

mark hole drilled in the

right side . Make sure

that it is fitted straight, in

line with the panel edges

and then fit another

screw using the lower

hole.

Screw 6 metal

dowels into the holes

on the right side .

b: Fit 4 hinge plates

onto the right side ,

making sure that the slot

is facing towards the

finished front edge.

Push 2 hollow core

locking nuts into the

right side , making

sure that they are flush

against the panel’s

surface.

Using a hammer, tap in

the pin on the hollow

core locking nut .

Finished

front edge

Finished

front edge

Finished

front edge

Finished

front edge

Finished

front edge

Assembly Instructions

Step 3

Prepare the 2

horizontals

Insert 4 large locking

nuts into each of the

2 horizontals .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Tap 2 wooden dowels

into each of the 2

horizontals .

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

10mm

Finished

front edge

x 2

Fit the 2 horizontals

to the right side

Push the 2 horizontals

onto the right side .

Use a screwdriver to

tighten the 2 large

locking nuts fitted

each horizontal .

Note: Turn the large

locking nuts as far as

they will go - more than

1/2 a turn.

Step 4

Prepare the top

Screw 4 small metal

dowels into the holes

on the top .

Note: Tighten metal

dowels up fully against

the panel.

Assembly Instructions

Step 5

Finished

front edge

B B

Fit the top

Attach the top onto

the assembly.

Note: You will need to

slide the 2 small metal

dowels into the top

of the 2 hollow core

locking nuts .

Insert a screwdriver into

the 2 hollow core locking

nuts and turn the nuts

inside as far as they will

go.

Step 6

Step 7

Prepare the plinth and

the back rail

Insert 2 large locking

nuts into the plinth

and 2 into the back rail

. .

Tap 2 wooden dowels

into the plinth and 2

into the back rail .

Assembly Instructions

Step 8

Fit the plinth and the

back rail

Push the plinth and

the back rail onto

the right side .

Use a screwdriver to

tighten the 2 large

locking nuts fitted

to the plinth and

back rail .

Note: Support the

end of the plinth

and back rail until the

left side has been fitted.

Step 9

B B

Fit the left side

Push the left side

onto the assembly.

Note: You will need to

slide the 2 small metal

dowels into the top

of the 2 hollow core

locking nuts .

Insert a screwdriver into

the 2 hollow core locking

nuts and turn the nuts

inside as far as they

will go.

Use a screwdriver to

tighten the 6 large

locking nuts fitted

to the horizontals ,

plinth and back

rail .

Assembly Instructions

Step 10

Warning: The

robe is heavy.

Lift with care.

Fit the back panel

a: Square up the unit by

making sure that

measurement x to x

equals y to y.

b: Place the back

onto the unit, coloured

surface facing down.

Note: The back must be

positioned so that it is

central on the unit.

Nail around the

outside edges of

the back .

Note: Nails should

try to be spaced

out evenly.

Stand the unit up for

the next stage.

The measurement from top corner X to bottom corner X must be

equal to the measurement from top corner Y to bottom corner Y

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos SKYE WOOD 476/7538 Bedienungsanleitung

Argos

Argos Valencia 633/7777 Bedienungsanleitung

Argos

Argos Home Arlon 452/8454 Bedienungsanleitung

Argos

Argos New Sywell 411/1524 Bedienungsanleitung

Argos

Argos Home Baltimore 855/4819 Bedienungsanleitung

Argos

Argos Habitat Winchester Tall TV Unit 414/7990 Bedienungsanleitung

Argos

Argos Nordic 1663886 Bedienungsanleitung

Argos

Argos HOME 631/1494 Bedienungsanleitung

Argos

Argos New Sywell 187/2354 Bedienungsanleitung

Argos

Argos Ohio Ottoman 143/6563 Bedienungsanleitung

Argos

Argos 274/9668 Bedienungsanleitung

Argos

Argos 482/8893 Datenblatt

Argos

Argos Eden 397/6540 Bedienungsanleitung

Argos

Argos Cube Coffee Table Bedienungsanleitung

Argos

Argos Phoenix 162/2690 Bedienungsanleitung

Argos

Argos 932/7722 Bedienungsanleitung

Argos

Argos New Penton Bedienungsanleitung

Argos

Argos Triple Metal And Polycotton Wardrobe Datenblatt

Argos

Argos 245/7424 Bedienungsanleitung

Argos

Argos Shelby 322/0296 Bedienungsanleitung

Argos

Argos 460/9830 Datenblatt

Argos

Argos Mix Bedienungsanleitung

Argos

Argos 4FT6 BED FRAME Bedienungsanleitung

Argos

Argos PENTON Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung