Argos New Sywell 411/1524 Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

New Sywell - 3 Drawer 2 Door Robe

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800

Issue 1 - 28/05/15

Important - Please read these instructions fully before starting assembly

ALR3193

411/1524

404/1340

412/3127

411/6316

Width - 70.5cm

Depth - 50cm

Height - 172cm

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 51kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: It is

recommended that this unit is

secured to a wall using the

overbalance protector kit

supplied or, an alternative fixing

method of your choice.

• Dispose of all packaging

carefully and responsibly.

Components - Panels

Please check you have all the panels listed below

80%

If you have damaged or missing components, call the

Customer Helpline: 03456 400800 quoting the reference

numbers below

Left Side (DF3319)

(171.1 x 49.6cm)

Right Side (DF3320)

(171.1 x 49.6cm)

Top (D2559A)

(67.4 x 49.4cm)

Base (D2562A)

(67.4 x 49.4cm)

Shelf (DF3326)

(67.4 x 46.8cm)

Rail (D2597A)

(67.4 x 12.5cm)

Hanging Rail (FHR666)

(66.6cm long)

Left Door (DF3325)

(115.5 x 33.3cm)

Drawer Front (DF3324)

(67 x 16.2cm) x 3

Right Door (DF3987)

(115.5 x 33.3cm)

Drawer Back (W370-124)

(64.1 x 12.4cm) x 3

Drawer Base (T652-367)

(65.2 x 36.7cm) x 3

Back (X1682-700)

(168.2 x 70cm)

Left Drawer

Side (W370-124LH)

(37 x 12.4cm) x 3

Right Drawer

Side (W370-124RH)

(37 x 12.4cm) x 3

89 10 11

13 14

Please check you have all the fittings listed below

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 03456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Wooden dowel (F22) x 14

Metal dowel (F901) x 20

D F

G H I

J K

9mm Screw (F74) x 6 9mm Screw (F73) x 12

Drawer runner (F1004) x 6

Small locking

nut (F3) x 6

Large locking

nut (F900) x 14

Nail (F51) x 32

Handle (F315) x 5

13mm Screw (F63) x 16

Hinge plate

(F523) x 6 Hinge (F522) x 6

25mm Screw (F95) x 10

Rail Holder

(F891) x 2

Shelf stud (F110) x 2

Knock-in Peg (F171) x 12

Plastic Nail (F91) x 4

Wedgefix (F639) x 12

Strap Screw Washer x 2

Overbalance protector kit (F269) x 1

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 03456 400800 quoting the reference

numbers below

Step 1

x 3

Step 2

Prepare the 3 drawer

fronts

Screw 2 metal dowels

into each of the drawer

fronts .

Note: Tighten the metal

dowels up fully against

the panels.

Prepare the drawer

sides

Insert a small locking

nut into the hole

shown on the left drawer

side and the right

drawer side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Step 3

Attach the drawer

sides to the large

drawer fronts

Push the left drawer sides

. and right drawer sides

. onto the back of the 3

drawer fronts .

Turn the small locking

nuts on the left

drawer side and right

drawer side .

Note: Turn the locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

910

80% x 3

Assembly Instructions

Step 4

Fit the drawer base

Slide the drawer base

down the grooves in the

drawer sides and

and down into the

groove in the drawer

front .

Step 5

Fit the large drawer

back

Fit the drawer back

between the drawer

sides and .

Make sure that the

drawer base fits into

the groove in the drawer

back .

Hold the drawer back

in position and tap the

knock-in pegs

through the holes in the

drawer sides and .

Step 6

9 10

x 3

9 10

Fit the wedgefixes

Turn the large drawer

assemblies over and

slide 4 wedgefixes

into the front and back

grooves, as shown, and

tighten up the screws.

Step 7

Attach the handles

Attach a handle to

each drawer front

using 2 screws .

Finished

front edge

Assembly Instructions

Step 8

Finished

front edge

Prepare the left side

a: Place 3 runners on

the left side as

shown. Slide back the

top of runner and use the

2nd hole from the front

to fit the 1st screw .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the left side .

c: Screw 7 metal

dowels into the left

side .

Fit 3 hinge plates onto

the left side , making

sure that the slot is

facing towards the

finished front edge.

To fit the rail holder ,

screw through the top

hole with screw and

into the mark hole drilled

in the left side . Make

sure that it is fitted

straight, in line with the

panel edges and then fit

another screw using

the lower hole.

Finished

front edge

Finished

front edge

Assembly Instructions

Step 9

Finished

front edge

Finished

front edge

Prepare the right side

a: Place 3 runners on

the right side as

shown. Slide back the

top of runner and use the

2nd hole from the front

to fit the 1st screw .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the right side .

c: Screw 7 metal

dowels into the right

side .

Fit 3 hinge plates onto

the right side , making

sure that the slot is

facing towards the

finished front edge.

To fit the rail holder ,

screw through the top

hole with screw and

into the mark hole drilled

in the right side .

Make sure that it is fitted

straight, in line with the

panel edges and then fit

another screw using

the lower hole.

Finished

front edge

Finished

front edge

Finished

front edge

Assembly Instructions

Step 10

Finished

front edge

Prepare the top

Tap 4 wooden dowels

into the top .

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

Insert 4 large locking

nuts into the top .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

10mm

Note: The top

has 2 holes on 1

of its surfaces

Note: The shelf is slightly

smaller than the base

and has been finished on

both of its surfaces

Fit the top to the right

side

Push the top onto

the right side .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the top .

Note: Turn the large

locking nuts as far as

they will go - more than

1/2 a turn.

2 holes

Step 11

Step 12 D

Finished

front edge

Prepare the shelf

Tap 4 wooden dowels

into the shelf .

Insert 4 large locking

nuts into the shelf .

Finished

front edge

Finished

front edge

Assembly Instructions

Step 13

Fit the shelf

Push the shelf onto

the right side .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the shelf .

Finished

front edge

Prepare the base

Tap 4 wooden dowels

into the base .

Insert 4 large locking

nuts into the base

. .

plain

chipboard

surface

Step 14

Step 15

Fit the base

Push the base onto

the right side .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the base .

plain

chipboard

surface

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Canterbury 505/9348 Bedienungsanleitung

Argos

Argos Normandy 428/2611 Bedienungsanleitung

Argos

Argos 501-3298 Bedienungsanleitung

Argos

Argos 875/4059 Bedienungsanleitung

Argos

Argos 482/0688D Bedienungsanleitung

Argos

Argos Mia 2627436 Bedienungsanleitung

Argos

Argos 609/0045 Bedienungsanleitung

Argos

Argos DALLAS 424/2833 Bedienungsanleitung

Argos

Argos 609/2256 Bedienungsanleitung

Argos

Argos Westminster 424/3485 Bedienungsanleitung

Argos

Argos 719/0023 Bedienungsanleitung

Argos

Argos 609/2263 Bedienungsanleitung

Argos

Argos Clive Metal Futon 758/7502 Bedienungsanleitung

Argos

Argos Nordic 1709771 Bedienungsanleitung

Argos

Argos Sasha End Table Kurzanleitung

Argos

Argos New Sywell 427/1237 Bedienungsanleitung

Argos

Argos 831/8701 Bedienungsanleitung

Argos

Argos Seville 171/8140 Bedienungsanleitung

Argos

Argos Stirling 331/3639 Bedienungsanleitung

Argos

Argos Fabric Large Ottoman 227/6430 Bedienungsanleitung

Argos

Argos 2FT6 Josie Shorty Bunk Bed 436/6733 Bedienungsanleitung

Argos

Argos BRADLEY 2581747 Bedienungsanleitung

Argos

Argos Sywell 615/8482 Bedienungsanleitung

Argos

Argos New Sywell 187/2354 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung