Argos Malibu Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 138cm

Depth - 49cm

Height - 72cm

Malibu - Pedestal Desk and Filer

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 4 - 09/04/14

Important - Please read these instructions fully before starting assembly

279/5935

246/9405

ALR2689

Issue 2 - 28/11/11 - The Cupboard Right Side (D1162A) is now drilled with through-holes for the Runners and the Modesty panel.

The step showing the customer to drill these holes has been removed.

Issue 3 - 18/03/13 - Argos code added for Oak - 617/3890

Issue 4 - 09/04/14 - New BQSP version.

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 37kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 1, 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: If there is any

chance of this unit being pulled

over by children etc. it is

recommended that the unit is

secured to a wall using suitable

fixings (not supplied).

• Dispose of all packaging

carefully and responsibly.

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page can be

cut out and used as reference throughout

the assembly. Keep this page with these

instructions for future reference.

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Tools required

Rule Scissors Hammer

Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Electric drill

(do not use for

fitting screws)

Components - Panels

Please check you have all the panels listed below

80%

x 2

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

10 11

File Side (W414)

(314 x 120mm) x 2

3 4

23 File Bar (FBAR334)

(334mm long) x 2

Top (D2799A)

(1377 x 490mm)

Small Back

(X846)

(622 x 375mm)

Plinth (D2810A)

(349 x 80mm)

Modesty (D2805A)

(601 x 162.5mm)

Drawer Front

(D2797A)

(358 x 156mm)

File Back (D2795A)

(338 x 253mm)

File Front (D2798A)

(358 x 300mm)

Drawer Back

(W331-124LH)

(331 x 124mm)

Drawer Base (T342-367)

(342 x 367mm)

Left Drawer

Side (W370-124LH)

(370 x 124mm)

Right Drawer

Side (W370-124RH)

(370 x 124mm)

Large Back

(X661-388)

(661 x 388mm)

Cupboard Left

Side (D2832A)

(706 x 444mm)

Filer Left

Side (D2800A)

(706 x 444mm)

Fixed Shelf

(D2806A)

(362 x 423mm)

Shelf (D2814A)

(349 x 421mm)

Cupboard Right

Side (D2803A)

(706 x 444mm)

Filer Right

Side (D2801A)

(706 x 444mm)

Rail (D2796A)

(362 x 80mm) x 2

Door (D2808A)

(623 x 345mm)

Base (D2813A)

(349 x 426mm)

Keyboard Shelf (D2809A)

(580 x 350mm)

17 18 19

24 25

21 File Base (T320-320)

(320 x 320mm)

Please check you have all the fittings listed below

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

9mm Screw (F73) x 8

Knock-in Peg (F171GY) x 4

Wedgefix (F639) x 2

9mm Screw (F74) x 2

A B

Metal dowel (F901) x 14

Large locking

nut (F900) x 8

G H

Small locking

nut (F3) x 6 25mm Screw (F50) x 740mm Screw (F910) x 18

Wooden dowel (F22) x 6

13mm Screw (F63) x 10

Nail (F51) x 22

Shelf stud (F110) x 4

Handle (F631) x 3

Drawer runner (F1004) x 4

13mm Screw (F52) x 6

Wedge panel holder

(F248) x 2

15mm Screw (F116) x 2

Hinge plate

(F523) x 2

Hinge (F522) x 2

R Runner (F160) x 1

L Runner (F161) x 1

L Runner (F159) x 1

R Runner (F162) x 1

Plastic Nail (F91) x 8

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Step 1

80%

17 18

Step 2

Prepare the drawer

front

Screw 2 metal dowels

into the drawer front .

Note: Tighten the metal

dowels up fully against

the panels.

Prepare the drawer

sides

Insert a small locking

nut into the hole

shown on the left drawer

side and the right

drawer side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Step 3

Attach the drawer

sides to the drawer

fronts

Push the left drawer sides

. and right drawer sides

. onto the back of the

drawer fronts .

Turn the small locking

nuts on the left

drawer side and right

drawer side .

Note: Turn the locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

14 B

Assembly Instructions

Step 4

Fit the drawer base

Slide the drawer base

down the grooves in the

drawer sides and

and down into the

groove in the drawer

front .

Step 5

Fit the drawer back

between the drawer

sides and .

Make sure that the

drawer base fits into

the groove in the drawer

back .

Hold the drawer back

in position and tap the

knock-in pegs

through the holes in the

drawer sides and .

Step 6

17 18

Attach the handle

Attach a handle to the

drawer front using

screw .

Note: Do not

overtighten the screw.

17 18

Step 7

Fit the wedgefixes

Turn the drawer

assembly over and slide

2 wedgefixes into the

front and back grooves,

as shown, and tighten up

the screws.

Assembly Instructions

Step 8

Prepare the file front

and the file back

Screw 2 metal dowels

into the holes shown on

the back of the file front

. .

Screw 2 metal dowels

into the holes shown on

the file back .

Note: Tighten the metal

dowels up fully against

the panels.

Prepare the file sides

Insert 2 small locking

nuts into the holes

shown on each of the file

sides .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Assemble the file

front and file sides

a: Push 2 file sides

onto the back of the file

front as shown.

b: Turn the 2 small

locking nuts on the

file sides clockwise

to secure them - more

than 1/2 a turn.

Step 9

Step 10

x 2

12 16

Small groove

Fit the drawer back

Push the file back

down onto the 2 file

sides and 2 file bars

. .

Turn the 2 small locking

nuts on the file sides

. clockwise to secure

them - more than 1/2 a

turn.

Note: Make sure that

the file base is

pushed into the groove

in the file back .

Assembly Instructions

Step 11

Fit the file base

Slide the file base

between the slots in the

2 file sides and push

it down onto the file front

. .

Fit the file bars

Push the 2 file bars

down into the holes on

the file front .

Step 12

Step 13

325mm

Assembly Instructions

Step 14

Attach the handle

Attach a handle to the

file front using screw

. .

Step 15

N N

Secure the backs

Place the wedge panel

holders onto the file

base , pushing them

up against the back of

the file front .

Screw the wedge panel

holders into the 2

mark holes using screws

. .

Finished

front edge

Assembly Instructions

Step 16

Step 17

Prepare the cupboard

left side

Fit 2 hinge plates onto

the cupboard left side

making sure that the slot

is facing towards the

finished front edge.

Insert 2 large locking

nuts into the

cupboard left side as

shown.

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

U d

U c

Runners must be

pushed up against

the drawer front

Fit runners to the file

drawer

Turn the file drawer

assembly over.

Fit runner , marked

with ‘DR’, to the bottom

edge of the right file side

. , as shown, making

sure that it is pushed up

against the back of the

file front . Use a

bradawl to mark the

fixing positions, then

secure with 2 screws .

Fit runner , marked

‘DL’, to the bottom edge

of the left file side

using the same method.

U d

U c

Right side

Left side

Andere Handbücher für Malibu

Dieses Handbuch passt für folgende Modelle

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Chicago Dining Set Bench Bedienungsanleitung

Argos

Argos 257/2471 Bedienungsanleitung

Argos

Argos Wow Lima 600/6503 Bedienungsanleitung

Argos

Argos 609/5741 Bedienungsanleitung

Argos

Argos Suki 609/7426 Bedienungsanleitung

Argos

Argos Newbridge 4830544 Bedienungsanleitung

Argos

Argos Sparkle Bedienungsanleitung

Argos

Argos Verona 609/5026 Bedienungsanleitung

Argos

Argos Camden 239/9472 Bedienungsanleitung

Argos

Argos 2 Door Robe Bedienungsanleitung

Argos

Argos Mia 2627436 Bedienungsanleitung

Argos

Argos 3279515 Bedienungsanleitung

Argos

Argos 626/9728 Bedienungsanleitung

Argos

Argos Aspley 498/9622 Bedienungsanleitung

Argos

Argos Sophia 471/9160 Bedienungsanleitung

Argos

Argos Arvika 356/4536 Bedienungsanleitung

Argos

Argos Curve 377/3585 Bedienungsanleitung

Argos

Argos Hudson 331/8218 Bedienungsanleitung

Argos

Argos Mix and Match 709/2523 Bedienungsanleitung

Argos

Argos ASHWELL 806/3922 Bedienungsanleitung

Argos

Argos 875/4334 Bedienungsanleitung

Argos

Argos Sophia 2 Door Robe 499/5520 Bedienungsanleitung

Argos

Argos San Diego 343/7058 Bedienungsanleitung

Argos

Argos Atlantic 651/1548 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung