Argos Mirrored Cabinet Bedienungsanleitung

Components Triple Mirrored Door Cabinet

Simple Assembly Instructions - Please keep for future reference

A. Left Side C. Left Internal

Panel x 1 Panel x 1 E1. S Shelf x

B. Right Side D. Rignt Internal

Panel x 1 Panel x 1

E2. L Shelf x

H. Back Panel x 1

F. Top Panel x 1 G. Base Panel x 1

I. Left Door x 1 J. Middle Door x 1 K. Right Door x 1

Fittings IMPORTANT

1. Familiarise yourself with the procedure 4. Ensure you have enough space to lay out

before assembling the unit. all the parts before assembly.

2. Check that you have all the component 5. To avoid scratching it is recommended

L. Screw Cap x 16 M. Shelf Support x 24 N. Straight O. Hinge P. Curving parts following the list on the BACK that you assemble the article on a soft

Hinge x Screw x 36 Hinge x 2 cover and familiarise yourself with level surface.

each part before proceeding.

3. Take all the fittings out of the plastic bag 6. The Maximum Safe Load of this item is

Q. Triangle Board x 4 R. Wall Plug x 4 S. Wall Screw x 4 T. Assembly Screw x 16 and separate them into their groups. 10KGS

Assembly Instructions

Fitting the Support Frame

NOTE: It would be useful to ask someone 6. Fit the curving hinges (P) into the pilot holes

to help you to assemble this unit. of left internal panel(C) to attach the middle

door (J) with hinge screws (O).

1. Attach the side panel(A&B) and internal (See Fig. 5)

panel (C&D) to base panel (G) with

assembly screw (T). 7. Attach the triangle boards (Q) to the

(See Fig. 1) corners of back panel, securing it with glue

(not provided) (See Fig. 6)

Ensure that the grooves in the side panels Ensure the holes in triangle boards are in

face inwards and are aligned with the line with those in the back panel.

groove in the base panel. 8. Select a suitable location against a wall to

2. Insert the back panel (H) by sliding it into fix the cabinet onto the wall using the

the grooves of the side panels screws provided. Mark the position for the

(See Fig. 2) screw fixings through the four fixing

holes in the cabinet back. Drill the fixing

Ensure that the laminated white surface holes in the wall and insert the wall plugs

is facing inwards and the holes are (R). Hold the cabinet over the drilled holes

positioned as shown. and fit the wall screws (S) into the wall plugs

through the cabinet back (See Fig. 7.)

3. Attach the top panel (F) to assemble the

frame, using screws (T) (See Fig. 3). 9. After wall mounting the cabinet, fit the shelf

supports (M) into the holes on each side of

Make sure that the back panel is located cabinet and place the S&L shelf (E1&E2)

properly in the groove in the top panel onto the supports (See Fig. 7).

before tightening the screws. Care and Maintenance

4. Insert the screw caps (L) over the holes in SAFETY

those frame panels. To avoid any risk of suffocation to animals or children dispose of the plastic bags

immediately.

5. Fit the straight hinges (N) into the pilot holes CLEANING

of side panels(A&B) to attach the door As with all surfaces clean with a damp cloth and mild detergent,do not use bleach or

panels (I&K) with hinge screws (O). abrasive products.

(See Fig. 4) FITTING

From time to time please ensure there are no loose screws on the product.

Fig. 5

Fig. 4

Fig. 1

Fig. 2

Fig. 3

Fig. 6

Fig. 7

SAFETY WARNING INFORMATION BS7449 : 1991

Keep these instructions for future use: Catalogue Number: 833/0332(D)

Manufacture date:

Retailer: Argos

Retailer address: 489-499 Avebury Boulevard

WARNINGS Saxon Gate West

Central Milton Keynes

*Do not place very hot or very cold items against or in Bucks, MK9 2NW

close proximity to glass surface unless an adequately

thick insulating material is used to prevent such items

from coming into contact with the glass. This unit contains film backed mirror of nominal thickness

of 3 mm

*Do not strike the glass with hard or pointed items. This unit contains safety backed mirrored doors of a

nominal thickness of 3 mm, which is not required to be

*When cleaning glass panels or mirrors use a damp classified to BS6206 Class C.

or leather with washing up liquid or soft soap if necessary;

do not use washing powders or any other substance If a glass is chipped or broken replace with

containing abrasive since these substances scratch glass. glass of the type described on this label. Consult the

manufacturer, retailer, or agent with regard to

*It is essential that the unit to be fixed to a wall using the obtaining a manufacturing specification and shape for

fixings provided. replacement glass quoting the model number, and batch

number or date of manufacture.

No.2 "General Purpose" Wall Plug

Aerated / Breeze Block

Generally aerated blocks should not be

used to support heavy loads, use a

specialist fitting in this case.

For light loads, a General Purpose Plug

can be used.

A Guide to A Guide to

Wall Mounting & FixingsWall Mounting & Fixings

No.5 "Cavity Fixing - Heavy Duty"

Wall Plug

For use when fitting or supporting heavy

loads such as shelving, wall cabinets,

coat racks.

No.6 "Hammer Fixing" Wall Plug

For use with walls stuck with plaster board.

The hammer fixing allows it to be fixed to

the wall rather than the plaster board.

Always check the fixing is secure to the

retaining wall.

HINTS:

1) General Rule Always use a larger screw and wall plug if you are not sure.

2) Ensure you use the recommended drill bit to match the wall plug and hole size.

3) Ensure you drill the hole horizontally, do not force the drill or enlarge the hole.

4) Take extra care when drilling high walls, ceilings and ceramic tiles. Ensure the

plug is fitting below the ceramic tile to avoid splitting or cracking.

5) Ensure wall plugs are well fitted and are a tight fit in the drilled hole.

IMPORTANT:

When drilling into walls always check

that there are no hidden wires or pipes

etc. Make sure that the screws and wall

plugs being used are suitable for

supporting your unit. Consult a qualified

tradesperson if you are unsure.

No.3 "Shield Anchor" Wall Plug

Heavy Loads

For use with heavier loads such as TV

& HiFi Speakers and Satellite Dishes etc.

No.4 "Cavity Fixing" Wall Plug

For use with plaster board partitions or

hollow wooden doors.

Types Of Walls

You can use one of the following types

of wall plug if your walls are made of brick,

breeze block, concrete, stone, wood or

plaster board.

No.1 "Standard" Wall Plug

General Wall Materials

These come in various sizes and are

made from plastic or sometimes wood

fiber.

CARE & MAINTENANCE

SAFETY

Always check the fitting and location to ensure your safety in and around the home.

FITTING

From time to time check the fitting to ensure the wall plugs or screws do not become

loose.

Mirrored Cabinet

Dimensions

Width - 80cm

Depth - 15.5cm

Height - 64cm

Important – Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800

Assembly Instructions- please keep for future reference

Issue 1 - 15/04/10

833/0332

Safety and Care Advice

Important – Please read these instructions fully before starting assembly

Care and maintenance

• Check you have all the

components and tools listed on

pages 1 and 2.

• Remove all ttings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close

to its nal position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your oor.

• Parts of the assembly will be

easier with 2 people.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Dispose of all packaging

carefully and responsibly.

• Only clean using a damp

cloth and mild detergent, do

not use bleach or abrasive

cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal

centre.

Components - Panels

Please check you have all the panels listed below

1 Side x 2

(64(h)cm x 13.7(d)cm)

2 Left middle x 1

(59(h)cm x 12.5(d)cm)

3 Right middle x 1

(59(h)cm x 12.5(d)cm)

4 Top / bottom x 2

(77(w)cm x 13.7(d)cm)

5 Back x 1

(60(h)cm x 78(w)cm)

6 Outer door x 2

(64(h)cm x 22.7(w)cm)

7 Middle door x 1

(64(h)cm x 33.8(w)cm)

8 Small shelf x 4

(20.5(w)cm x 12.2(d)cm)

9 Large shelf x 2

(32.5(w)cm x 12.2(d)cm)

Components - Fittings If you have damaged or missing components,

call the Customer Helpline: 0845 640 0800

Please check you have all the ttings listed below

Note: The quantities below are the correct amount to complete the assembly. In some cases more ttings

may be supplied than are required.

A B C D

Screw cover x 16 40mm Screw x 16 Spring hinge x 4 Hinge screw x 36

E F G H

Curved spring hinge x 2 Shelf bracket x 24 Corner bracket x 4 Rawl plug x 4

I J

40mm Wall screw x 4 Washer x 2

Tools required

Phillips screwdriver

(medium & large) Drill

Ruler – Use this ruler to help correctly identify the screws

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170

105

Assembly Instructions

Step 1

Connect the 2 x side 1,

the left middle 2 and

the right middle 3 to

1 x top/bottom 4 using

8 x 40mm screw B as

shown.

Insert a screw cover A

over the head of each

screw.

Note: ensure the slots of

the side panels 1 both

point toward the rear of

the unit.

Step 2

Slot back 5 into place

as shown.

Step 3

Connect 1 x top/bottom

4 to the exposed

ends of 2 x side 1, the

left middle 2 and the

right middle 3 using

8 x 40mm screw B as

shown.

Insert a screw cover A

over the head of each

screw.

Insert 24 x shelf bracket

F as shown.

Assembly Instructions

Step 4

Connect 2 x outer door

6 to the side panels

using 4 x spring hinge C

and 16 x hinge screw D

as shown.

Hinge adjustment:

a: To adjust doors up

or down, loosen screws

shown and move doors

to suit.

Once doors are aligned,

re-tighten and insert

remaining screws D into

all hinge plates.

b: To move doors in

or out, loosen screws

shown and move doors

to suit.

Retighten screws.

Step 5

Connect middle door

7 to right middle panel

using 2 x curved spring

hinge E and 8 x hinge

screw D as shown.

See Step 4 for hinge

adjustment.

Step 6

Place the small shelves

8 and the large shelves

9 onto the shelf

brackets.

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos 1524853 Bedienungsanleitung

Argos

Argos 356/3018 Bedienungsanleitung

Argos

Argos 600/6486 Bedienungsanleitung

Argos

Argos Yanniek 483/4124 Bedienungsanleitung

Argos

Argos Malvern 604/0105 Bedienungsanleitung

Argos

Argos Vince 697/1470 Bedienungsanleitung

Argos

Argos Heathdon Habitat Lavendon 953/0083 Bedienungsanleitung

Argos

Argos 6172633 Bedienungsanleitung

Argos

Argos Home Venetia Bedienungsanleitung

Argos

Argos Brixham 617/9131 Bedienungsanleitung

Argos

Argos Capella 249/6674 Bedienungsanleitung

Argos

Argos Malibu 282/2736 Bedienungsanleitung

Argos

Argos 184/9198 Bedienungsanleitung

Argos

Argos Habitat PATSY CLIC CLAC 3337574 Bedienungsanleitung

Argos

Argos Eastleigh Ant Pewter 09H Bedienungsanleitung

Argos

Argos SAN DIEGO 395/6199 Bedienungsanleitung

Argos

Argos 2587356 Bedienungsanleitung

Argos

Argos Camden 305/0679 Bedienungsanleitung

Argos

Argos Nordic 4x2 Drawer Chest Bedienungsanleitung

Argos

Argos Arizona 4607904 Bedienungsanleitung

Argos

Argos Aurora 157/1844 Bedienungsanleitung

Argos

Argos Solid Wood Storage Box Bedienungsanleitung

Argos

Argos Home 2FT6 Josie 404/9373 Bedienungsanleitung

Argos

Argos Avebury 3ft Bed 355/2108 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung