Argos Canterbury 505/9348 Bedienungsanleitung

Canterbury 3 DRW BEDSIDE

Assembly Instructions - Please save for future reference

517/0698

497/0961

505/9348

Dimensions

Width - 45.8cm

Depth - 41.9cm

Height - 48.5cm

71931 Version F Date 23/11/2018

Important – Please read these instructions carefully before starting assembly

If you need help or have damaged or missing parts, call the Customer Helpline:

Argos = 0345 6400800

max.

lbs

rev B 15-01-2016 ahs:3 grebsskrue skiftet fra 26228 til 26232

71931

-50

71931

C01

www.tvilum.com

Safety and Care Advice

Important – Please read these instructions carefully before starting the assembly

Note: If required, the next

page can be cut out and used

as reference throughout the

assembly. Keep this page with

these instructions for future

reference.

• Check you have all the

components and tools listed on

the following pages.

• Remove all ttings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Make sure you have enough

space to lay out the parts before

starting.

• During assembly, do not stand

or put weight on the product,

this could cause damage.

• Assemble the item as close

to its nal position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your oor.

• Parts of the assembly will be

easier with 2 people.

• We do not

recommend the use

of power drivers for

inserting screws, as

this could damage

the unit. Only use hand screw

drivers.

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household waste.

Take to your local authority

waste disposal centre.

Care and maintenance

Skin contact: Remove

contamination by washing with

soap and water. This procedure

should also be followed prior to

eating and drinking.

Eye contact: Rinse immediately

with clean water for 15 minutes

and seek medical advice.

If swallowed: Seek medical

advice immediately.

Glue safety - Take care when using glue, please follow the advice below

Components - Panels

Please check that you have all the panels as listed below

If you have damaged or missing components, call the

Customer Helpline:

Argos = 0345 6400800

$PRPVIEW:{Pos_Beslag}

x12

ø5mm

1/5"

25 pcs

00749

Right drawer side x3 (34.5 x 8.8 cm)

00750

Left drawer side x3 (34.5 x 8.8 cm)

03302

Drawer back x3 (33.7 x 8.8 cm)

06079

Drawer bottom x3 (34.8 x 34.2)

09585

Back panel (46.1 x 37.9 cm)

76425

Profile side x2 (41.5 x 2.5 cm)

76426

Profile side x2 (41.5 x 2.5 cm)

73433

Profile front x2 (45 x 2.5 cm)

76435

Base rail (36.95 x 3.1 cm)

Top panel (45.8 x 41.9 cm)

Side panel x2 (45.2 x 39 cm)

Bottom panel (45.8 x 41.9 cm)

Drawer front x3 (36.6 x 12.5)

Vælg 1 eller 2 personer

$PRPVIEW:{Pos_Beslag}

x12

ø5mm

1/5"

25 pcs

00749

Right drawer side x3 (34.5 x 8.8 cm)

00750

Left drawer side x3 (34.5 x 8.8 cm)

03302

Drawer back x3 (33.7 x 8.8 cm)

06079

Drawer bottom x3 (34.8 x 34.2)

09585

Back panel (46.1 x 37.9 cm)

76425

Profile side x2 (41.5 x 2.5 cm)

76426

Profile side x2 (41.5 x 2.5 cm)

73433

Profile front x2 (45 x 2.5 cm)

76435

Base rail (36.95 x 3.1 cm)

Top panel (45.8 x 41.9 cm)

Side panel x2 (45.2 x 39 cm)

Bottom panel (45.8 x 41.9 cm)

Drawer front x3 (36.6 x 12.5)

Vælg 1 eller 2 personer

Please check that you have all the ttings as listed below

Note: The quantities listed below are the correct amounts to complete the assembly.

In some cases, more ttings may be supplied than required.

Components - Fittings

Tools required

Ruler - Use this ruler to help correctly identify the screws

Cross head screwdriver

(medium & large)

Flathead screwdriver

(medium)

Ruler

01 02 03 04 05 06 07 08 09 0 100 110 120 130 140 150

01 23 45 6

Eye protection

(when using a

hammer or glue)

Hammer

Tape measure

Wooden block

Awl

Floor glider x4

63008

Handle x3

81040

Drawer runner x6

41404

Panel clips x8

10401

Cam bolt x14

31513

Flat head screw

(ø3.5 x 15mm) x12

25233

Machine screw (M4 x 9mm) x6

26214

Dowel (ø5 x 30mm) x20

20203

Flat head screw (ø6.3 x 27mm) x6

26033

Cam x14

31687

Machine screw (M4 x 23mm) x3

26232

Drawer fastener x12

20228

22601

Glue x1

Wedges x4

33204

26020

Flat head screw (ø5.8 x 9mm) x12

Screw (ø4 x 20mm) x2

25447

Assembly Instructions

Step 1

Step 2

Insert dowels 20203

into outer holes on the

ends of side panels F.

Place cams 31687 into

the holes on top of side

panels Fwith the ar-

rows facing the edges of

the side panels.

Insert cams

Insert dowles

Insert cam bolts

31513 into the top and

bottom panel Land I.

The cam bolts must be

screwed down ush with

the surface.

Dowel

#20203 x8

Cam

#31687 x8

Fittings you will need for this step:

Cam bolt

#31513 x8

Fittings you will need for this step:

# $PRPVIEW:{Pos_Beslag}

Beslag sættes ind i scala 1:2 som udgangspunkt

05-09-2017_JTJA:

OBS:

Billedramme samt billede er gemt under "Skjult" lag.

Dette skyldes, at samlevejledningen gemmes til AI, og for at

sørge for, at der ikke automatisk kommer disse billedrammer

med i eksporteringen, hvorved man ikke skal rette AI filen

efterfølgende og manuelt.

DETTE ER BILLEDE 1 & 2

# $PRPVIEW:{Pos_Beslag}

Beslag sættes ind i scala 1:2 som udgangspunkt

05-09-2017_JTJA:

OBS:

Billedramme samt billede er gemt under "Skjult" lag.

Dette skyldes, at samlevejledningen gemmes til AI, og for at

sørge for, at der ikke automatisk kommer disse billedrammer

med i eksporteringen, hvorved man ikke skal rette AI filen

efterfølgende og manuelt.

DETTE ER BILLEDE 1 & 2

Assembly Instructions

Step 3

Fittings you will need for this step:

# $PRPVIEW:{Pos_Beslag}

1 27

Front

Beslag sættes ind i scala 1:2 som udgangspunkt

05-09-2017_JTJA:

OBS:

Billedramme samt billede er gemt under "Skjult" lag.

Dette skyldes, at samlevejledningen gemmes til AI, og for at

sørge for, at der ikke automatisk kommer disse billedrammer

med i eksporteringen, hvorved man ikke skal rette AI filen

efterfølgende og manuelt.

DETTE ER BILLEDE 3

Front

Flat head screw

#25233 x12

Flat head screw

#26020 x12

Drawer runner

#41404 x6

Place drawer runners

Extend drawer runner

41404 and make sure to

note which way it runs.

Place drawer runner

41404 so that they face

the fronts of side panels

F . Next, screw in at

head screw 26020 into

hole no. 4 as illustrated.

Adjust drawer runner

41404 as illustrated and

screw in at head screw

26020 into hole no. 25.

Likewise, extend drawer

runner 41404 and nd

hole no. 15 as illustrated.

Then, use an awl before

screwing in at head

screw 25233 .

Lastly, use an awl and

screw in at head screw

25233 in hole no. 27 as

illustrated.

Repeat these 5steps for

the remaining runners.

Assembly Instructions

Step 5

Step 4

Attach back panel

Slide the back panel

09585 smoothly down

into the grooves in the

side and bottom panel F

+ I.

Attach bottom panel

Place cam bolts from the

bottom panel Iinto the

holes in the ends of side

panels F.

Make sure that the

nished edges are facing

towards the front and

that the unnished sides

are facing towards the

bottom of the cabinet.

When pushed together,

tighten the cams as

illustrated.

# $PRPVIEW:{Pos_Beslag}

09585

Beslag sættes ind i scala 1:2 som udgangspunkt

05-09-2017_JTJA:

OBS:

Billedramme samt billede er gemt under "Skjult" lag.

Dette skyldes, at samlevejledningen gemmes til AI, og for at

sørge for, at der ikke automatisk kommer disse billedrammer

med i eksporteringen, hvorved man ikke skal rette AI filen

efterfølgende og manuelt.

DETTE ER BILLEDE 4 & 5

# $PRPVIEW:{Pos_Beslag}

09585

Beslag sættes ind i scala 1:2 som udgangspunkt

05-09-2017_JTJA:

OBS:

Billedramme samt billede er gemt under "Skjult" lag.

Dette skyldes, at samlevejledningen gemmes til AI, og for at

sørge for, at der ikke automatisk kommer disse billedrammer

med i eksporteringen, hvorved man ikke skal rette AI filen

efterfølgende og manuelt.

DETTE ER BILLEDE 4 & 5

Assembly Instructions

Step 7

Step 6

Attach the top panel

Attach the top panel L

by inserting dowel pins

and cam bolts into the

holes.

When pushed together,

tighten the cams as

illustrated.

Assemble proles

Insert wedges 33204

into the slots on the

angle ends of side and

front proles 76426 +

76433 + 76425 .

Please use a hammer for

this step.

Fittings you will need for this step:

Wedges

#33204 x4

Top

Bottom

# $PRPVIEW:{Pos_Beslag}

A = B

09585

76426

76433

76425

05-09-2017_JTJA:

OBS:

Billedramme samt billede er gemt under "Skjult" lag.

Dette skyldes, at samlevejledningen gemmes til AI, og for at

sørge for, at der ikke automatisk kommer disse billedrammer

med i eksporteringen, hvorved man ikke skal rette AI filen

efterfølgende og manuelt.

DETTE ER BILLEDE 6 & 7

# $PRPVIEW:{Pos_Beslag}

A = B

09585

76426

76433

76425

05-09-2017_JTJA:

OBS:

Billedramme samt billede er gemt under "Skjult" lag.

Dette skyldes, at samlevejledningen gemmes til AI, og for at

sørge for, at der ikke automatisk kommer disse billedrammer

med i eksporteringen, hvorved man ikke skal rette AI filen

efterfølgende og manuelt.

DETTE ER BILLEDE 6 & 7

Assembly Instructions

Step 8

Step 9

Attach prole

Attach the assembled

prole as shown.

Place bottom panel I

as illustrated, and then

insert at head screw

26033 .

Fittings you will need for this step:

Add glue to prole

Insert dowels 20203

into holes on the assem-

bled prole. Use glue

22601 as illustrated.

Add one small drop of

glue per hole.

# $PRPVIEW:{Pos_Beslag}

76433

76426

76425

76433

max 9 mm

05-09-2017_JTJA:

OBS:

Billedramme samt billede er gemt under "Skjult" lag.

Dette skyldes, at samlevejledningen gemmes til AI, og for at

sørge for, at der ikke automatisk kommer disse billedrammer

med i eksporteringen, hvorved man ikke skal rette AI filen

efterfølgende og manuelt.

DETTE ER BILLEDE 8 & 9

Flat head screw

#26033 x6

# $PRPVIEW:{Pos_Beslag}

76433

76426

76425

76433

max 9 mm

05-09-2017_JTJA:

OBS:

Billedramme samt billede er gemt under "Skjult" lag.

Dette skyldes, at samlevejledningen gemmes til AI, og for at

sørge for, at der ikke automatisk kommer disse billedrammer

med i eksporteringen, hvorved man ikke skal rette AI filen

efterfølgende og manuelt.

DETTE ER BILLEDE 8 & 9

Dowel

#20203 x6

Glue

#22601 x1

Assembly Instructions

Step 11

Step 10

Attach the base rail

Flip the cabinet so that

it stands on its bottom

panel I .

Place base rail 76435

behind the assembled

prole (push forward as

shown with the arrow).

Then, insert and tighten

screw 25447 in the

base rail.

Attach assembled

prole

Add glue 22601 in holes

of the top panel L.

Add one small drop of glue

per hole.

Place the assembled

prole as illustrated and

press down with the

dowels going into the

holes.

Fittings you will need for this step:

Glue

#22601 x1

# $PRPVIEW:{Pos_Beslag}

76425

76433

F F

09585

76435

05-09-2017_JTJA:

OBS:

Billedramme samt billede er gemt under "Skjult" lag.

Dette skyldes, at samlevejledningen gemmes til AI, og for at

sørge for, at der ikke automatisk kommer disse billedrammer

med i eksporteringen, hvorved man ikke skal rette AI filen

efterfølgende og manuelt.

DETTE ER BILLEDE 10 & 11

Screw

#25447 x2

# $PRPVIEW:{Pos_Beslag}

76425

76433

F F

09585

76435

05-09-2017_JTJA:

OBS:

Billedramme samt billede er gemt under "Skjult" lag.

Dette skyldes, at samlevejledningen gemmes til AI, og for at

sørge for, at der ikke automatisk kommer disse billedrammer

med i eksporteringen, hvorved man ikke skal rette AI filen

efterfølgende og manuelt.

DETTE ER BILLEDE 10 & 11

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Marlow 424/2929 Bedienungsanleitung

Argos

Argos Emmett 149/2765 Bedienungsanleitung

Argos

Argos Capella Bedienungsanleitung

Argos

Argos Ontario 149118 Bedienungsanleitung

Argos

Argos Capella Bedienungsanleitung

Argos

Argos Shelby 322/0296 Bedienungsanleitung

Argos

Argos Malibu Series Bedienungsanleitung

Argos

Argos HOME Jesse Toddler Bed 707/3676 Bedienungsanleitung

Argos

Argos 709/2626 Bedienungsanleitung

Argos

Argos New Hallingford 4 Door 3 Drawer Wardrobe Bedienungsanleitung

Argos

Argos Aurora 147/1360 Bedienungsanleitung

Argos

Argos Hallingford 802/6622 Bedienungsanleitung

Argos

Argos Perth 423/8029 Bedienungsanleitung

Argos

Argos Amelie 247/9873 Bedienungsanleitung

Argos

Argos Mason 872/4072 Bedienungsanleitung

Argos

Argos Islington Installationsanleitung

Argos

Argos Cheval 146/7965 Bedienungsanleitung

Argos

Argos Kensington 411/7542 Bedienungsanleitung

Argos

Argos Hallingford 305/2763 Bedienungsanleitung

Argos

Argos AVR 4 Seater Patio Set Bedienungsanleitung

Argos

Argos New Hallingford 346/9727 Bedienungsanleitung

Argos

Argos 600/3575 Bedienungsanleitung

Argos

Argos San Diego 343/7058 Bedienungsanleitung

Argos

Argos Hudson 331/8218 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung