Argos Sywell 615/8482 Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 136.5cm

Depth - 49.5cm

Height - 175.5cm

Sywell - 4 Door Mirrored Robe

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 5 - 05/06/13

Important - Please read these instructions fully before starting assembly

615/8482

615/8475

615/8437

615/8451

615/8444

615/8468

ALR2630

01/08/11 - AI amended to show 2 different types of hinges being used.

10/04/12 - Updated the blow-up diagrams in Step 1 to also show the holes that shouldn’t be used for the Hinge Plates.

Issue 4 - 28/05/12

Updated the components page to remove shelf stud holes and re code upright. Hinge plate holes are blind.

Change images throughout to remove any through holes showing on upright.

Issue 5 - 05/06/13 - Title changed from Caspian to Sywell.

Side panels no longer have rebates - Left Side now D2377A and Right Side now D2378A.

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 78kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: It is

recommended that this unit is

secured to a wall using the

bracket supplied.

• Dispose of all packaging

carefully and responsibly.

Components - Panels

Please check you have all the panels listed below

80%

x 2

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

1 2

Upright (D0943B)

(1642 x 473mm)

3 4

Hanging Rail (FHR648)

(648mm long) x 2

Top (D0945A)

(1333 x 489mm)

Base (D0944A)

(1333 x 474mm)

Plinth (D0942A)

(1333 x 80mm)

Plain Door

(D0262A)

(1652 x 330mm)

x 2

5Mirror Door

(D0941A)

(1652 x 330mm)

Mirror - SG17

(1648 x 275mm

4mm Safety

Back SAR) x 2

Back (X820)

(1670 x 677mm) x 2

Left Side (D2377A)

(1753 x 491mm)

Right Side (D2378A)

(1753 x 491mm)

Please check you have all the fittings listed below

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Wooden dowel (F22) x 6

B C

D E F

40mm Screw (F910) x 14

19mm Screw (F461) x 8

Rule

Nail (F51) x 40

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Tools required

Rule

ScissorsSquare

Spirit

level

Hammer Bradawl

Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Step

ladder

Ruler - Use this ruler to help correctly identify the screws

13mm Screw (F79) x 11 13mm Screw (F63) x 24

Handle (F923) x 4

Electric drill

(only use

when drilling

into walls)

Rail holder

(F1014) x 4 Bracket (F327) x 1

Hinge (F522) x 6

Hinge plate

(F523) x 6

Hinge Plate

(F521) x 6 Hinge (F520) x 6

AHP1546

AHP0826

Finished

front edge

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Step 1

Finished

front edge

Prepare the upright

Important: The hinge

plates used in this

step are in the bag

marked as AHP0826.

a: Fit 3 hinge plates

onto the upright ,

making sure that the slot

is facing towards the

finished front edge.

Push a rail holder into

the upright . Make

sure that it is fitted

straight, in line with the

panel edges.

Turn the upright over

b: Fit 3 hinge plates

onto the upright ,

making sure that the slot

is facing towards the

finished front edge.

Push a rail holder into

the upright . Make

sure that it is fitted

straight, in line with the

panel edges.

Turn the

upright over

plain chipboard surface

Prepare the top and

base

a: Tap 2 wooden

dowels into the top

. .

b: Tap 2 wooden

dowels into the base

. .

Note: The base only has

one finished surface.

Step 2

Finished

front edge

Finished

front edge

AHP1546

AHP0826

Finished

front edge

Finished

front edge

Finished

front edge

Assembly Instructions

Step 3

Step 4

Fit the top to the

upright

Attach the top to the

upright using 2

screws .

plain chipboard surface

Fit the base to the

upright

Attach the base to

the upright using 2

screws .

Assembly Instructions

Step 5

Finished

front edge

Prepare the right side

Important: The hinge

plates used in this

step are in the bag

marked as AHP1546.

Fit 3 hinge plates onto

the right side , making

sure that the slot is

facing towards the

finished front edge.

Push a rail holder into

the right side . Make

sure that it is fitted

straight, in line with the

panel edges.

Step 6

Fit the right side

Attach the right side

to the top and base

. using 4 screws .

AHP1546

AHP0826

Assembly Instructions

Step 7

Step 8

Fit the plinth

Attach the plinth to

the right side using

screw .

Prepare the plinth

Tap 2 wooden dowels

into the plinth .

Plain chipboard

surface

Plain chipboard

surface

Assembly Instructions

Step 9

Prepare the left side

Important: The hinge

plates used in this

step are in the bag

marked as AHP1546.

Fit 3 hinge plates onto

the left side , making

sure that the slot is

facing towards the

finished front edge.

Push a rail holder into

the left side . Make

sure that it is fitted

straight, in line with the

panel edges.

Step 10

Fit the left side

Attach the left side to

the top , base and

plinth using 5 screws

. .

Finished

front edge

6 7

AHP1546

AHP0826

Assembly Instructions

Step 11

Warning: The

unit is heavy.

Lift with care.

Fit back panels

a: Square up the unit by

making sure that

measurement x to x

equals y to y.

b: Place the 2 backs

coloured surface facing

down, onto the unit as

shown.

Make sure that the 2

backs are pushed up

tight against each other

and that they meet in the

centre of the upright’s

. back edge.

Nail around the

outside edges of the 2

backs .

Note: Do not nail where

the 2 backs meet.

Nails should be spaced

out evenly.

c: Using 10 screws ,

screw down between the

2 backs and into the

upright panel’s back

edge .

Stand the unit up for

the next step.

b: c:

The measurement from top corner X to bottom corner X must be

equal to the measurement from top corner Y to bottom corner Y

Note: Only use 10 screws .

You will need 1 for step 16.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Finland 656/1770 Bedienungsanleitung

Argos

Argos Home 615/1795 Bedienungsanleitung

Argos

Argos 257/2471 Bedienungsanleitung

Argos

Argos Mason 872/4072 Bedienungsanleitung

Argos

Argos 248/6622D Bedienungsanleitung

Argos

Argos Anderson 2 plus 2 Sideboard Bedienungsanleitung

Argos

Argos Jenson Mirror Bedienungsanleitung

Argos

Argos White Tongue & Groove 2 Drawer Unit Bedienungsanleitung

Argos

Argos Adele 247/9866 Bedienungsanleitung

Argos

Argos SAVANNA 476/9086 Bedienungsanleitung

Argos

Argos Jenson Bedienungsanleitung

Argos

Argos HOME Jenson Gloss 341/1304 Bedienungsanleitung

Argos

Argos Eastleigh Ant Pewter 09H Bedienungsanleitung

Argos

Argos Jenson 937/8032 Bedienungsanleitung

Argos

Argos Camden 259/3773 Bedienungsanleitung

Argos

Argos AH TOBY 8545550 Bedienungsanleitung

Argos

Argos Baby Amelie 228/2785 Bedienungsanleitung

Argos

Argos Eden 412/3062 Bedienungsanleitung

Argos

Argos RONDA 7592573 Bedienungsanleitung

Argos

Argos 6172633 Bedienungsanleitung

Argos

Argos Home 2FT6 Josie 404/9373 Bedienungsanleitung

Argos

Argos hygena 617/5599 Bedienungsanleitung

Argos

Argos Stirling 331/3639 Bedienungsanleitung

Argos

Argos Emberton 934/2501 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung