Argos Sit N' Sleep Bed Bedienungsanleitung

Sit N’ Sleep Bed

Assembly Instructions - Please keep for future reference

Important - Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 1 - 08/11/13

Dimensions

Width - 200cm

Depth - 99/143cm

Height - 170.5cm

758/5418

758/5401

IMPORTANT NOTE:

The top surface of the

mattress should not come

above this line.

Note: if required the next

page can be cut out and used

as reference throughout the

assembly. Keep this page with

these instructions for future

reference.

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

Warnings

Care and maintenance

• Because of the size of this unit,

it is recommended to assemble it

in the room intended for use.

• Do not discard any of the

packaging until you have

checked that you have all the

parts and the pack of fittings.

• Discard all extra fittings and

keep fittings out of reach of

children.

• Assemble this product on a flat

surface.

• Assemble all parts loosely

before tightening any bolts.

• At least 2 people are required

to assemble this product.

• Unit weight: 38.6kgs.

• Retain Assembly Instructions

for future reference.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Dispose of all packaging

carefully and responsibly.

• READ CAREFULLY - RETAIN

FOR FUTURE REFERENCE

• Regularly check and ensure

that all bolts and fittings are

tightened properly.

• Always use the ladder for

entering and leaving the upper

bunk.

• The recommended mattress

size is L1900 x W910 mm.

• Ensure thickness of mattress

does not exceed 220 mm.

• Refrain from using the bunk

bed if any structural part is

broken or missing.

• Please advise your children to

only enter and leave the upper

bunk by using the ladder.

• Please prohibit more that one

person on the upper bunk.

• Please prohibit children from

jumping on the upper and lower

beds.

• WARNING: Do not allow

children under 6 years of age to

use the upper bunk due to risk

of injury and falls.

• STRANGULATION HAZARD -

Never attach or hang items such

as ropes, strings, cords,

harnesses and belts to any part

of the bunk bed.

• WARNING: Children can

become trapped between the

bed and the wall. To avoid risk

of serious injury the distance

between the top safety barrier

and the wall shall not exceed 75

mm or shall be more than 230

mm.

• THIS BED COMPLIES WITH

EN747-1:2012 / EN747-2:2012

• Please clean the unit surface

using either damp (not wet)

cloth and a mild domestic soap

solution or by using an

appropriate polish.

• Do not use any abrasive

materials when cleaning.

• From time to time check that

there are no loose bolts on this

unit.

Components - Parts

Please check you have all the parts listed below

Lower rail

(190 x 6.5 x 2.5cm)

Upper front safety rail

(190 x 41.5 x 2.5cm)

Upper back safety rail

(190 x 41.5 x 2.5cm)

Slats (with webbing attached) x 24

(94 x 2.5 x 2.6cm)

Upper side safety rail x 2

(91 x 36 x 4cm)

Front right-hand

endpost

(Ø5 x 170.5cm)

1Back right-hand

end post

(Ø5 x 170.5cm)

Lower side rail x 2

(91 x 4 x 2cm)

Front left-hand

end post

(Ø5 x 170.5cm)

4Back left-hand

end post

(Ø5 x 170.5cm)

Middle side rail x 2

(89 x 2 x 2cm)

Sticker “4”Sticker “3”Sticker “2”Sticker “1”

Components - Parts (cont.)

Please check you have all the parts listed below

Ladder brace

(45.5 x 1.5 x Ø1cm)

15 Shelf side frame x 2

(52 x 33 x 1.6cm)

16 Shelf brace x 4

(Ø1.3 x 72cm)

Small shelf panel

(72 x 24 x 1.2cm)

18 Big shelf panel

(72 x 33 x 1.2cm)

19 Back brace x 2

(135.5 x 2 x Ø1.3cm)

Left ladder side rail

(Ø2.5 x 141cm)

12 Right ladder side rail

(Ø2.5 x 141cm)

13 Ladder step x 4

(Ø2.5 x 29 cm)

Sticker “12” Sticker “13”

Components - Fittings

Please check you have all the fittings listed below

Tools required

M6 x 80mm Bolt x 11

If you have damaged or missing components,

call the Customer Helpline: 08456 400800

Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings

may be supplied than are required.

M6 x 50mm Bolt x 8

M6 x 35mm Bolt x 2

Ruler - Use this ruler to help correctly identify the screws

0 15 30 45 60 75 905 20 35 50 65 80 9510 25 40 55 70 85 100 120 140105 125 145110 130 150115 135 155 160 165 170

Crosshead screwdriver

Small screw x 2

Big screw x 8

M6 Lock nut x 6

Plastic washer x 8

M8 Curved washer x 12

M6 Curved washer x 19

Plastic cap x 8

M6 x 27mm Bolt x 12

M6 x 20mm Bolt x 11

M8 x 60 mm Bolt x 12

Spring washer x 8

Spanner x 1

Allen key x 1

Wall strap x 1

Assembly Instructions

Step 1

RIGHT-HAND END PANEL

a: b:

A J

LEFT-HAND END PANEL

A J AJ

Assembling end panels

Lay all parts flat on a soft

surface on the floor to

avoid damaging any of

the parts.

Note:

Identify and

correctly position

end posts , ,

and by

looking for the

sticker label

pasted on the

posts.

Note:

Determine your

preferred shelf

position. Then

attach the middle

side rails

either on the left

or right.

a: Attach the lower side

rail to end posts

and then secure

using washers and

bolts .

Note: Do not fully

tighten bolts at

this stage.

b: Attach the upper side

safety rail into position

and secure using bolts .

Note: Fully

tighten all bolts

using allen key .

Repeat above steps to

assemble the left-hand

end panel as shown in

the diagram.

1 2

3 4

Sticker “2” Sticker “1”

Sticker “4” Sticker “3”

Attaching rails

Note: Determine

your preferred

bunk bed entry

position. Then

attach the front

safety rail with

the entry space

positioned either

on the left or right.

a: Identify the correct

rails for assembly and

with the help of an

assistant attach the lower

tubes of upper back

safety rail , upper front

safety rail and lower

rail to end posts using

bolts , washers and

nuts .

Note:

Do not fix bolts on

lower holes of

back safety rail

at this stage.

Locate hole on

centre of lower

rail and make

sure to position it

up.

Do not fully

tighten bolts at

this stage.

b: Attach the top tubes

of upper back safety rail

and upper front safety

rail to end posts using

bolts and washers .

Note: Do not fully

tighten bolts at

this stage.

c: Insert plastic caps

into holes on the right

end posts & and fix

by pushing firmly as

shown.

Assembly Instructions

Step 2

1 2

FIM

c:a:

hole up

Option for

right upper bunk entry

Option for

left upper bunk entry

Option for

right shelf position

Option for

left shelf position

10 10

Assembly Instructions

Step 3

20 20

a: b:

FIM

Step 4

Assembling shelf

a: Attach the shelf

braces to shelf side

frames using bolts

as shown.

Note: Do not fully

tighten bolts at

this stage.

b: Position the shelf

panels and as

shown and attach it to

shelf braces using

screws . Tighten screws

using a crosshead

screwdriver.

Note: After all

bolts and screws

are positioned,

fully tighten all

bolts using allen

key .

17 17

16 D

18 19

Attaching back braces

a: Position the back

braces as shown and

attach it to upper back

safety rail using bolts

, washers and nuts .

b: Attach the back

braces to lower rail

using bolt as shown.

Note: After all

bolts in step 2

and 3 are

positioned, fully

tighten all bolts

and nuts using

allen key and

spanner .

20 8

Assembly Instructions

Step 6

Attaching slats

a: With the help of an

assistant, line up the

slats onto upper rails

and . Push firmly

down to lock it into

position. Check that they

cannot be removed by

slightly pulling upwards.

b: Extend the end of the

webbing on the slats

and secure to bottom

edge of side safety rails

using screws .

Tighten screws using a

crosshead screwdriver.

9 10

Step 5

Attaching shelf

Position the shelf on the

bed as shown and attach

the side frames to

middle right side rails

using bolts . Tighten

bolts using allen key .

a: b:

Attaching ladder

Attach the ladder to the

upper front safety rail

using bolts as shown.

Tighten bolts using allen

key .

Step 7

Assembling ladder

Referring to diagram,

attach the ladder steps

to ladder side rails

and using bolts ,

spring washers ,

curved washers and

plastic washers .

Tighten all bolts using

allen key .

Note: Identify and

correctly position

the ladder side

rails and

by looking for the

sticker labels

pasted on the

rails.

Assembly Instructions

Step 8

12 13

Sticker “13”

Sticker “12”

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos 609/2256 Bedienungsanleitung

Argos

Argos Designer 2 Tone Bedienungsanleitung

Argos

Argos Habitat DUO CLIC CLAC 3553657 Bedienungsanleitung

Argos

Argos Nest of Tables 609/1439 Bedienungsanleitung

Argos

Argos Franklin Recliner 2493567 Bedienungsanleitung

Argos

Argos Knightsbridge 259/3034 Bedienungsanleitung

Argos

Argos Retro 226/2877 Bedienungsanleitung

Argos

Argos 033 3562 Series Bedienungsanleitung

Argos

Argos Seattle 4Ft6 Bedienungsanleitung

Argos

Argos HOME HM Maine 806/4402 Bedienungsanleitung

Argos

Argos Arvika 355/7794 Bedienungsanleitung

Argos

Argos Jenson Bedienungsanleitung

Argos

Argos Adult Malibu 532/9717 Bedienungsanleitung

Argos

Argos HOME 466/3175 Bedienungsanleitung

Argos

Argos OI WOW Eclipse 147/9726 Bedienungsanleitung

Argos

Argos 609/2263 Bedienungsanleitung

Argos

Argos Zest 267/8454 Bedienungsanleitung

Argos

Argos Antonio 157-7563 Bedienungsanleitung

Argos

Argos Aurora 158/9544 Bedienungsanleitung

Argos

Argos Amy white bunk Trundle Bedienungsanleitung

Argos

Argos Scandinavia Bedienungsanleitung

Argos

Argos Merrick 183/8587 Bedienungsanleitung

Argos

Argos Phoenix 719/3147 Bedienungsanleitung

Argos

Argos 932/7502 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung