Argos Stirling 343/9049 Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 72cm

Depth - 49cm

Height - 189cm

Stirling - 1 Drawer 2 Door Robe

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 1 - 07/11/14

Important - Please read these instructions fully before starting assembly

ALR3105

343/9049

345/7162

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 48kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 1, 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: It is

recommended that this unit is

secured to a wall using the

bracket supplied.

• Dispose of all packaging

carefully and responsibly.

Tools required

Rule

ScissorsSquare

Spirit

level

Hammer Bradawl

Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Step ladder

Electric drill

(do not use

for fitting

screws)

Components - Panels

Please check you have all the panels listed below

80%

90%

80%

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Left Side (D3016A)

(1810 x 457mm)

Right Side (D3017A)

(1810 x 457mm)

Hanging Rail (FHR649)

(649mm long)

Door (D3019A)

(1553 x 339mm) x 2

Top (D3014A)

(718 x 490mm)

Base (D3015B)

(718 x 490mm)

Horizontal (D3018A)

(659 x 456mm)

Drawer Front (D3000A)

(685 x 245mm)

Left Drawer

Side (W370-195LH)

(370 x 195mm)

Drawer Base (T637-367)

(637 x 367mm)

Right Drawer

Side (W370-195RH)

(370 x 195mm)

Back (X1836-685)

(1836 x 685mm)

Back Rail (D3020A)

(659 x 123mm)

Drawer Back (W626-195)

(626 x 195mm)

Please check you have all the fittings listed below

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

A B

D E F

G H I

Small locking

nut (F3) x 2

Nail (F51) x 33

40mm Screw (F910) x 16

9mm Screw (F74) x 2

9mm Screw (F73) x 4

38mm Screw (F81) x 4

Knock-in Peg (F171GY) x 4

Large locking

nut (F900) x 2

Metal dowel (F901) x 4

Wooden dowel (F22) x 2

Wedgefix (F639) x 4

Hinge (F518) x 6

Hinge plate

(F523) x 6

13mm Screw (F63) x 14

Rail holder

(F1014) x 2

Strap Screw Washer x 2

Overbalance protector kit (F269) x 1

QStrap

Screw Washer x 2

Overbalance protector kit (F269) x 1

Foot (F340) x 4

Handle (F463) x 4

Drawer runner (F1004) x 2

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Step 1

Step 2

Prepare the drawer

front

Screw 2 metal dowels

into the drawer front .

Note: Tighten the metal

dowels up fully against

the panels.

Prepare the drawer

sides

Insert a small locking

nut into the hole

shown on the left drawer

side and the right

drawer side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Step 3

Attach the drawer

sides to the drawer

front

Push the left drawer side

. and right drawer side

. onto the back of the

drawer front .

Turn the small locking

nuts on the left

drawer side and right

drawer side .

Note: Turn the locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

Assembly Instructions

Step 4

Fit the drawer base

Slide the drawer base

down the grooves in the

large drawer sides

and and down into

the groove in the large

drawer front .

Step 5

Fit the large drawer

back

Fit the drawer back

between the drawer

sides and .

Make sure that the

drawer base fits into

the groove in the drawer

back .

Hold the drawer back

in position and tap the

knock-in pegs

through the holes in the

drawer sides and .

8 9

Attach the handles

Attach 2 handles to

the drawer front using

screws .

Step 6

8 9

Step 7

Fit the wedgefixes

Turn the large drawer

assembly over and slide

4 wedgefixes into the

front and back grooves,

as shown, and tighten up

the screws.

Finished front edge

Assembly Instructions

Step 8

Finished

front edge

Prepare the left side

a: Fit 3 hinge plates

to the left side

making sure that the slot

is facing towards the

finished front edge.

Push a rail holder into

the left side . Make

sure that it is fitted

straight, in line with the

panel edges and then

secure with screw .

Place a runner onto

the left side . Slide

back the top of runner

and use the 2nd hole

from the front to fit the

1st screw .

Screw a metal dowel

into the left side .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the left side .

Assembly Instructions

Step 9

Finished

front edge

Finished

front edge

Finished

front edge

Prepare the right side

a: Fit 3 hinge plates

to the right side

making sure that the slot

is facing towards the

finished front edge.

Push a rail holder into

the right side . Make

sure that it is fitted

straight, in line with the

panel edges and then

secure with screw .

Place a runner onto

the right side . Slide

back the top of runner

and use the 2nd hole

from the front to fit the

1st screw .

Screw a metal dowel

into the right side .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the right side .

Finished front edge

Fit the horizontal to

the right side

Attach the horizontal

to the right side using

2 screws .

Step 10

plain

chipboard

surface

Finished

front edge

Assembly Instructions

Step 11

Step 12

Fit the back rail to the

right side

Push the back rail

onto the right side .

Use a screwdriver to

tighten the large locking

nut fitted to the back

rail .

Note: Turn the large

locking nut as far as it

will go - more than 1/2 a

turn.

Note: Support

the back rail

until the left side

has been fitted

in the next step.

Finished

front edge

Prepare the back rail

Insert 2 large locking

nuts into the back rail

. .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Tap 2 wooden dowels

into the back rail .

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

10mm

Plain chipboard

surface

Polystyrene

block

Polystyrene

block

Assembly Instructions

Step 13

Step 14

Fit the left side

Push the left side

onto the horozontal

and back rail .

Attach the left side to

the horizontal using 2

screws .

Use a screwdriver to

tighten the large locking

nut fitted to the back

rail .

Fit the top

Attach the top to the

left side and right

side using 4 screws

. .

Note: To make it easier

to fit the top and base

panels, place polysty-

rene blocks from the

packaging underneath

the side panels to raise

the assembly.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos 832/8076 Bedienungsanleitung

Argos

Argos Arvika 355/7794 Bedienungsanleitung

Argos

Argos Kensington 411/7542 Bedienungsanleitung

Argos

Argos Tolga 03R 462/6071 Bedienungsanleitung

Argos

Argos Verona 609/5026 Bedienungsanleitung

Argos

Argos 501-3298 Bedienungsanleitung

Argos

Argos Kids Sywell 248/6282 Bedienungsanleitung

Argos

Argos Perth 423/8029 Bedienungsanleitung

Argos

Argos 618/0144 Bedienungsanleitung

Argos

Argos Osaka 2377889 Bedienungsanleitung

Argos

Argos COT Bedienungsanleitung

Argos

Argos Silbury 4142919 Bedienungsanleitung

Argos

Argos Silbury 4184719 Bedienungsanleitung

Argos

Argos 875/3775 Bedienungsanleitung

Argos

Argos Penton 483/0616 Bedienungsanleitung

Argos

Argos 365/9654 Bedienungsanleitung

Argos

Argos SAN DIEGO 412/7893 Bedienungsanleitung

Argos

Argos Ohio 309/5256 Bedienungsanleitung

Argos

Argos Theo Folding Bar Stool 600/0262 Bedienungsanleitung

Argos

Argos 600/5580 Bedienungsanleitung

Argos

Argos Venetia 630/3505 Bedienungsanleitung

Argos

Argos Matrix Glass Nest Table Bedienungsanleitung

Argos

Argos Medium Storage Unit 833/2471 Bedienungsanleitung

Argos

Argos 274/9668 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung