Argos Kids Sywell 248/6282 Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 99.5cm

Depth - 99cm

Height - 99cm

Kids Sywell - 1 Drawer Bedside

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800

Issue 2 - 06/02/15

Important - Please read these instructions fully before starting assembly

ALR3018

247/9732

226/1627

227/1356

248/6282

276/2690

275/1096

OLD CODES

Issue 2 - 06/02/15 - Replaced Argos codes with the latest ones.

Update helpline number.

Added note to last step to remove film.

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 9.5kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: If there is any

chance of this unit being pulled

over by children etc. it is

recommended that the unit is

secured to a wall using suitable

fixings (not supplied).

• Dispose of all packaging

carefully and responsibly.

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

Components - Panels

Please check you have all the panels listed below

80%

If you have damaged or missing components, call the

Customer Helpline: 03456 400800 quoting the reference

numbers below

12 3

Back (X389-359)

(389 x 359mm)

Rail (D2544A)

(363 x 78mm) x 2

5Drawer Front (D2545A)

(359 x 162mm)

9 10

Left Drawer Side (W370-124LH)

(370 x 124mm)

Right Drawer Side (W370-124RH)

(370 x 124mm)

Drawer Base (T342-367)

(342 x 367mm)

Left Side (D2924A)

(388 x 396mm)

Right Side (D2925A)

(388 x 396mm)

Drawer Back (W331-124)

(331 x 124mm)

Horizontal (D2541A)

(363 x 394mm) x 2

Please check you have all the fittings listed below

Tools required

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 03456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Rule Scissors Hammer

Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Wooden dowel (F22) x 8

Metal dowel (F901) x 14

D E F

G H I

J K

9mm Screw (F74) x 2 9mm Screw (F73) x 4

Drawer runner (F1004) x 2

Knock-in Peg (F171GY) x 4

Small locking

nut (F3) x 2

Large locking

nut (F900) x 12

Nail (F51) x 10

Handle (F315) x 1

25mm Screw (F95) x 2

Plastic Nail (F91) x 4

Wedgefix (F639) x 2

Short cross-head

screwdriver

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 03456 400800 quoting the reference

numbers below

Step 1

Note: Due to the manufacturing process, the holes for the

locking nut can be on either surface of the drawer sides.

Note: The locking nuts can be on either surface of the drawer sides.

Make sure that the small groove is on the inside, as shown.

Step 2

Prepare the drawer

front

Screw 2 metal dowels

into the drawer front .

Note: Tighten the metal

dowels up fully against

the panels.

Prepare the drawer

sides

Insert a small locking

nut into the hole

shown on the left drawer

side and the right

drawer side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Step 3

Attach the drawer

sides to the drawer

fronts

Push the left drawer sides

. and right drawer sides

. onto the back of the

drawer fronts .

Turn the small locking

nuts on the left

drawer side and right

drawer side .

Note: Turn the locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

Assembly Instructions

Step 4

Fit the drawer base

Slide the drawer base

down the grooves in the

drawer sides and

and down into the

groove in the drawer

front .

Step 5

Fit the drawer back

between the drawer

sides and .

Make sure that the

drawer base fits into

the groove in the drawer

back .

Hold the drawer back

in position and tap the

knock-in pegs

through the holes in the

drawer sides and .

Step 6

7 8

Attach the handle

Attach the handle to

the drawer front

using screws .

Note: Do not

overtighten the screws.

7 8

Step 7

Fit the wedgefixes

Turn the drawer

assembly over and slide

2 wedgefixes into the

front and back grooves,

as shown, and tighten up

the screws.

Finished

front edge

Finished

front edge

Assembly Instructions

Step 8

Prepare the left side

a: Place a runner on

the left side . Slide

back the top of the

runner and use the 2nd

hole from the front to fit

the 1st screw .

Screw 6 metal dowels

into the left side .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the left side .

Finished

front edge

Ha:

Finished

front edge

Step 9

Prepare the right side

a: Place a runner on

the right side . Slide

back the top of the

runner and use the 2nd

hole from the front to fit

the 1st screw .

Screw 6 metal dowels

into the right side .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the right side .

Finished

front edge

Finished

front edge

Finished

front edge

Assembly Instructions

Step 10

Prepare the 2

horizontals

Tap 2 wooden dowels

into each of the

horizontals .

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

Insert 4 large locking

nuts into each of the

horizontals .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Fit a horizontal to the

right side

Push a horizontal

onto the right side .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the horizontal .

Note: Turn the large

locking nuts as far as

they will go - more than

1/2 a turn.

Step 11

10mm

plain chipboard surface

Finished

front edge

x 2

Finished

front edge

plain chipboard surface

Assembly Instructions

Step 12

Step 13

Prepare the 2 rails

Tap 2 wooden dowels

into each of the 2 rails .

Insert 2 large locking

nuts into each of the

2 rails .

Step 14

x 2

plain chipboard surface

Fit the other horizontal

to the right side

Push the horizontal

onto the right side .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the horizontal .

Finished

front edge

plain chipboard surface

Fit the 2 rails

Push the 2 rails onto

the right side .

Use a screwdriver to

tighten the large locking

nut fitted to each of

the 2 rails .

Note: Support this

rail until the left

side has been fitted

in the next step.

Assembly Instructions

Step 15

Step 16

Fit the left side

Push the left side

onto the assembly.

Use a screwdriver to

tighten the 6 large

locking nuts fitted to

the 2 horizontals and

the 2 rails .

Fit the back and

plastic nails

a: Square up the unit by

making sure that

measurement x to x

equals y to y.

b: Place the back

onto the unit.

Nail around the

outside edges of the

back .

Note: Nails should be

spaced about 150mm

apart.

The measurement from top corner X to bottom corner X must be

equal to the measurement from top corner Y to bottom corner Y

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Sparkle 427/5484 Bedienungsanleitung

Argos

Argos 609/2263 Bedienungsanleitung

Argos

Argos HOME Bedienungsanleitung

Argos

Argos Princess Dining Chair 398/1298 Bedienungsanleitung

Argos

Argos LOUIE RGE 8231493 Bedienungsanleitung

Argos

Argos 280/0332 Bedienungsanleitung

Argos

Argos 602/9748 Bedienungsanleitung

Argos

Argos 184/9198 Bedienungsanleitung

Argos

Argos 875/7276 Bedienungsanleitung

Argos

Argos Capella Bedienungsanleitung

Argos

Argos Hallingford 305/2763 Bedienungsanleitung

Argos

Argos Tolga 497/2309 Bedienungsanleitung

Argos

Argos Arvika 357/6823 Bedienungsanleitung

Argos

Argos Athina 608/0804 Bedienungsanleitung

Argos

Argos Savannah 602/5326 Bedienungsanleitung

Argos

Argos Tolga 483/8364 Bedienungsanleitung

Argos

Argos Triple Metal And Polycotton Wardrobe Datenblatt

Argos

Argos Wow Leo 167/9605 Bedienungsanleitung

Argos

Argos 755/2238 Bedienungsanleitung

Argos

Argos WOW RATTAN EFFECT MINI CORNER 6174954 Bedienungsanleitung

Argos

Argos Matrix 609/0722 Bedienungsanleitung

Argos

Argos Iceland 178/6361 Bedienungsanleitung

Argos

Argos HOME HM Maine 806/4402 Bedienungsanleitung

Argos

Argos 346/4423 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung