Argos Zest 280/6769 Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 40cm

Depth - 40cm

Height - 43.5cm

Zest - Bedside

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 3 - 02/10/14

Important - Please read these instructions fully before starting assembly

ALR3041

280/6769

Issue 2 - 02/07/14 - Cat Code changed to 280/6769.

Screws for the feet changed to F81 (SC2800).

Amended the assembly so that the base panel is now fitted before the feet.

Issue 3 - 02/10/14 - Range name changed to Zest

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 11kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: If there is any

chance of this unit being pulled

over by children etc. it is

recommended that the unit is

secured to a wall using suitable

fixings (not supplied).

• Dispose of all packaging

carefully and responsibly.

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

Components - Panels

Please check you have all the panels listed below

12 3

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Top (D2946A)

(396 x 396mm)

Horizontal (D2950A)

(362 x 394mm)

Back (X402-390)

(402 x 390mm)

Drawer Front (D2951A)

(374 x 192mm)

Left Side (D2947A)

(376 x 395mm)

Base (D2949A)

(396 x 396mm)

Right Side (D2948A)

(376 x 395mm)

Left Drawer Side (W370-124LH)

(370 x 124mm)

Right Drawer Side (W370-124RH)

(370 x 124mm)

45 6

7 8 9

10 11

Drawer Base (T321-367)

(321 x 367mm)

Drawer Back (W329-124)

(310 x 124mm)

Please check you have all the fittings listed below

Tools required

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

A B C

D E F

G H I

Rule Scissors Hammer

Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Nail (F51) x 11

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Electric drill

(do not use for

fitting screws)

Knock-in Peg (F171GY) x 4

Wedgefix (F639) x 2

13mm Screw (F63) x 613mm Screw (F52) x 6

MR Runner (F160) x 1

L Runner (F161) x 1

L Runner (F159) x 1

R Runner (F162) x 1

350mm long

40mm Screw (F910) x 4

Metal dowel (F901) x 10 Large locking

nut (F900) x 8

Small locking

nut (F3) x 2

Handle (F894GRN) x 1

Foot (F233) x 4

32mm Screw (F72) x 1

38mm Screw (F81) x 8

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Step 1

Note: Due to the manufacturing process, the holes for the

locking nut can be on either surface of the drawer sides.

Note: The locking nuts can be on either surface of the drawer sides.

Make sure that the small groove is on the inside, as shown.

Step 2

Prepare the drawer

front

Screw 2 metal dowels

into the drawer front .

Note: Tighten the metal

dowels up fully against

the panels.

Prepare the drawer

sides

Insert a small locking

nut into the hole

shown on the left drawer

side and the right

drawer side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Step 3

Attach the drawer

sides to the drawer

fronts

Push the left drawer sides

. and right drawer sides

. onto the back of the

drawer fronts .

Turn the small locking

nuts on the left

drawer side and right

drawer side .

Note: Turn the locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

Assembly Instructions

Step 4

Fit the drawer base

Slide the drawer base

down the grooves in the

drawer sides and

and down into the

groove in the drawer

front .

Step 5

Fit the drawer back

between the drawer

sides and .

Make sure that the

drawer base fits into

the groove in the drawer

back .

Hold the drawer back

in position and tap the

knock-in pegs

through the holes in the

drawer sides and .

Step 6

7 8

Attach the handle

Attach the handle to

the drawer front

using screw .

Note: Do not

overtighten the screw.

7 8

Step 7

Fit the wedgefixes

Turn the drawer

assemby over and slide

2 wedgefixes into the

front and back grooves,

as shown, and tighten up

the screws.

Assembly Instructions

Step 8

Fit runners to the

drawer

Fit the runner to the

bottom edge of the left

drawer side , as

shown, making sure that

it is pushed up against

the back of the drawer

front . Use a bradawl

to mark the fixing

positions, then secure

with 2 screws .

Fit the runner to the

bottom edge of the right

drawer side using the

same method.

M c

M d

Runners must be

pushed up against

the drawer front

M c

M d

Step 9

Prepare the horizontal

Insert 4 large locking

nuts into the

horizontal .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Green

edge

Green edge

Assembly Instructions

Step 10

Step 11

Prepare the left side

Screw 2 metal dowels

into the left side .

Insert 2 large locking

nuts into the left side

. .

Fit the runner to the

left side .

The 1st screw uses

the 2nd hole in from the

front of the runner.

The 2nd and 3rd screws

. use the holes that line

up with the other panel

holes.

Fit a screw into the

2nd hole in at the top of

the runner .

Prepare the left side

a: Fit runner to the

left side .

The 1st screw uses

the 2nd hole in from the

front of the runner.

The 2nd and 3rd screws

. use the holes that line

up with the other panel

holes.

b: Fit a screw into

the 2nd hole in at the top

of the runner .

c: Screw 4 metal

dowels into the left

side .

Insert 2 large locking

nuts into the left side

. .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Fit 2 hinge plates onto

the left side , making

sure that the slot is

facing towards the

finished front edge.

P a

M a

Finished front edge

1st

screw

2nd

screw

3rd

screw

M a

Finished front edge

P a

M a

M b

Finished front edge

G1st

screw

2nd

screw

G3rd

screw

M b

Finished front edge

M b

Prepare the right side

Screw 2 metal dowels

into the right side .

Insert 2 large locking

nuts into the right

side . .

Fit the runner to the

right side .

The 1st screw uses

the 2nd hole in from the

front of the runner.

The 2nd and 3rd screws

. use the holes that line

up with the other panel

holes.

Fit a screw into the

2nd hole in at the top of

the runner .

M b

Green edge

Green

edge

Green

edge Green

edge

Assembly Instructions

Step 12

Step 13

Fit the horizontal to

the right side

Push the horizontal

onto the right side .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the horizontal .

Note: Turn the large

locking nuts as far as

they will go - more than

1/2 a turn.

Fit the left side

Push the left side

onto the horizontal .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the horizontal .

Step 14

Prepare the top

Screw 4 metal dowels

into the top .

Green

edge

Green

edge

Assembly Instructions

Step 15

Step 16

Fit the top

Push the top onto

the assembly.

Use a screwdriver to

tighten the 4 large

locking nuts fitted to

the left side and right

side .

Note: Turn the large

locking nuts as far as

they will go - more than

1/2 a turn.

Fit the base

Fit the base onto the

assembly using 4 screws

. .

Green

edge

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Heart of House kent 3 door 3 drawer wardrobe... Bedienungsanleitung

Argos

Argos 875/9047 Bedienungsanleitung

Argos

Argos Adele 257/6549 Bedienungsanleitung

Argos

Argos Mia Daybed & Drw. White 8042572 Bedienungsanleitung

Argos

Argos Washington Bedienungsanleitung

Argos

Argos Constable 149/2545 Bedienungsanleitung

Argos

Argos Mendoza 228/9953 Bedienungsanleitung

Argos

Argos Home 603/4135 Bedienungsanleitung

Argos

Argos Single Robe 234046 Bedienungsanleitung

Argos

Argos 832/7149 D Bedienungsanleitung

Argos

Argos Aurora 158/9544 Bedienungsanleitung

Argos

Argos Napoli 600/6259 Bedienungsanleitung

Argos

Argos Winchester 395/5798 Bedienungsanleitung

Argos

Argos 3FT Josie 436/9730 Bedienungsanleitung

Argos

Argos Double Metal Futon 656/0898 Bedienungsanleitung

Argos

Argos Napoli 600/6273 Bedienungsanleitung

Argos

Argos NOMAD 727/7290 Bedienungsanleitung

Argos

Argos Marlow 424/1195 Bedienungsanleitung

Argos

Argos 044 0502 Series Bedienungsanleitung

Argos

Argos Amelie 247/9873 Bedienungsanleitung

Argos

Argos Hallingford 305/2763 Bedienungsanleitung

Argos

Argos 274/9668 Bedienungsanleitung

Argos

Argos Le Marais Double Unit Grey 502/6797 Bedienungsanleitung

Argos

Argos Montana 412/4621 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung