Asoni CAM412 Bedienungsanleitung
Pan-Tilt Network Camera
CAM412 / CAM412W
User’s Manual
Version: 3.1
Date: 5/22/2008
1
Content
1. Preface .................................................................................................................................2
2. Product Specifications...........................................................................................................2
3. Product Installation ...............................................................................................................4
A. Hardware Installation.........................................................................................................4
B. Monitor Setting..................................................................................................................6
C. IPAssignment ...................................................................................................................7
D. Install ActiveX Control .......................................................................................................9
4. Live Video...........................................................................................................................11
5. Configuration ......................................................................................................................14
A. System............................................................................................................................14
B. A/V Setting......................................................................................................................20
C. Network...........................................................................................................................25
D. Event Handling................................................................................................................30
6. Network Configuration ........................................................................................................38
7. Factory Default ...................................................................................................................40
Appendix....................................................................................................................................41
2
1. Preface
CAM412/412W is a Pan-Tilt CCD network camera, the Pan-Tilt function can be controlled
remotely. It builds in web server. User views real-time video via IE browser.
CAM412/412W supports MPEG-4 and MJPEG video compression which provides smooth
and high quality video. The video can be stored in the SD card, and can be playback
remotely using Microsoft Media Player.
CAM412/412W is an easy-to-use network P/T camera which is designed for security
application.
2. Product Specifications
zMPEG-4 / MJPEG compression formats. Supports resolution up to Full D1
zMPEG-4 / MJPEG dual streaming.
zSelf-Contained HTTP Web Server providing Internet capability for remote access
zRemote Pan/Tilt control
zWireless network connection (CAM412W)
zSupports SD card for local recording
z2-way audio
zReal-time video recording
zRecorded files compatible with Microsoft Windows Media Player
Hardware
CPU ARM 9 ,32 bit RISC
RAM 64MB
ROM 4MB
Image Sensor 1/4” CCD
Lens 3.6mm
Video Out 1
Microphone Built-in
Audio In / Out 1 in / 1 out
Digital I/O 1 In / 1 Out
Pan Angle 2700
Tilt Angle 1200
3
Power Consumption LAN: DC 5V, 1.3A WLAN: DC 5V, 1.5A
Network
Ethernet 10/ 100 Base-T
Wireless (CAM412W) 802.11b/g
WEP 64 / 128 bit
Network Protocol HTTP, TCP/IP, RTP/RTSP, 3GPP, SMTP, FTP, PPPoE, DHCP, DDNS, NTP
System
Video Resolution NTSC: 720x480, 704x480, 352x240, 176x120
PAL: 720x576, 704x576, 352x288, 176x144
VideoAdjustment Brightness, Contrast, Saturation, Hue
Image Snapshot Yes
Full Screen Monitoring Yes
Pan / Tilt Control Yes, remotely
Preset Point 9
Patrol Yes
Auto Pan Yes
Pan / Tilt Speed Control Yes
Compression Format MPEG-4, MJPEG
Dual Streaming Yes, MPEG-4 / MJPEG
Video BitrateAdjustment CBR, VBR
Motion Detection Yes, 3 different areas
Triggered Action Mail, FTP, Digital out, Save to SD card
Pre/ Post Alarm Yes, configurable
Security Password protection
Firmware Upgrade HTTP mode, can be upgraded remotely
Simultaneous Connection Up to 10
Audio Yes, 2-way
SD card management
Recording Trigger Motion detection, Digital input, IP check, Network break down (available for
Wire connection)
Video Format AVI, JPEG
Video Playback Yes
File Management Yes, can be deleted or overwrite
Web browsing requirement
OS Windows 2000, XP, 2003, Microsoft IE 6.0 or above
Hardware Suggested Intel-C 2.0G, RAM: 512MB, Graphic card: 64MB
Minimum Intel-C 1.6G, RAM: 256MB, Graphic card: 32MB
4
3. Product Installation
A. Hardware Installation
nNetwork Connector: The RJ-45 connector allows connect the Ethernet cable.
oPower Jack: To connect the included power adapter.
pAudio Out: The 3.5mm jack allows connect to an amplified speaker, you
can hear the voice of the remote site from the speaker.
qAudio In: The 3.5mm jack allows connect to a microphone or audio
source, the voice will be transffered to the remote site via
network.
rVideo Out: The RCA connector allows connect to the analog display to
output analog video for locally monitoring.
sDigital I/O: Digital In and Digital Out.
tAntenna Connector: Available for CAM412W. To connect the included wireless
antenna.
cAlarm Input
dGND
eAlarm Output
fGND
r
s
o
q
p
n
t
5
1. Connect the cable of Digital I/O, Video output, Audio in and Audio output if you want to
use these functionalities.
2. Connect the wireless antenna for CAM412W.
3. Connect Ethernet cable for network connection.
4. Connect power adapter to turn on the camera.
5. Set up the network configurations according to the network environment. For further
explanation, please refer to chapter 6.
6. After finish the configuration for the very first time, if you want to use wireless network,
plug out the Ethernet cable.
6
B. Monitor Setting
1. Right-Click on the desktop. Select [Properties]
2. Change color quality to “Highest (32bit)”.
7
C. IP Assignment
¾Always consult your network administrator before assigning an IP address to your
camera in order to avoid using a previously assigned IP address.
¾MAC Address: Each network camera has a unique Ethernet address (MAC address)
shown on the sticker of the camera.
¾One final note, although the IP Search is able to find and configure any network
camera on the LAN except those that are behind a router, it is a good idea to set the
host PC to the same subnet. In order to connect to the Web-based user interface of
the network camera, the host PC must be in the same subnet. For more information
about subnets, please consult your network administrator.
There are 3 kinds of IP configuration:
zFixed IP (Public IP or Virtual IP)
zDHCP (Dynamic IP)
zDial-up (PPPoE)
IP Search is a utility that provides an easier, more efficient way to configure the IP
address and network settings of the network camera. It even provides a convenient way
to set the network settings for multiple devices simultaneously. Moreover, IP Search can
save the network settings for all devices as a backup and restore them when necessary.
The software can be installed from the attached software CD.
1. Once IP Search has been successfully installed on the computer, double click the
IP Search icon on the desktop.
8
2. IP Search searches all the network devices which connect to the intranet and lists
on the window. Click [Search] button to search again.
3. From the list, select the device with the MAC Address that corresponds to the
device that is to be configured.
4. Click one of the network devices, the network configuration of this device will show
on the bottom.
5. After filling in the IPAddress, Subnet Mask, Gateway and the others, click [Set]
button to complete the configuration settings and save into the remote device.
6. You can assign a name to identify the camera. Type the name in “Device Name”
field, click [Save] and then click [Search] button, the name will be displayed in the
list.
7. Wait for 1 minute to let camera update the settings, and then click [Search] button
again to re-search the network devices. Click the network device listed on the
window and click [Open Web] button. It will open an IE browser and connect to this
device directly.
9
D. Install ActiveX Control
For the first time to view the camera video via IE, it will ask you to install the ActiveX
component.
If the installation failed, please check the security setting for the IE browser.
1. In IE, click on [Tools] Æ[Internet Options…]
2. Click on [Security] Tab Æ[Custom Level…]
3. In Security Settings, under [Download unsigned ActiveX controls], select “Enable”
or “Prompt”.
4. In Security Settings, under [Initialize and script ActiveX controls not marked as safe],
select “Enable” or “Prompt”.
5. When pop-up window with warning message, click [Yes] to save the settings.
1 2
Andere Handbücher für CAM412
1
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Asoni Sicherheitskamera Handbücher
Asoni
Asoni CAM662H Bedienungsanleitung
Asoni
Asoni CAM412 Bedienungsanleitung
Asoni
Asoni CAM642M Bedienungsanleitung
Asoni
Asoni CAM613M Bedienungsanleitung
Asoni
Asoni CAM6833EV Bedienungsanleitung
Asoni
Asoni CAM636M Bedienungsanleitung
Asoni
Asoni CAM417 Bedienungsanleitung
Asoni
Asoni CAM6709H Bedienungsanleitung
Asoni
Asoni CAM641 Bedienungsanleitung
Asoni
Asoni CAM413 Bedienungsanleitung
Asoni
Asoni CAM419 Bedienungsanleitung
Asoni
Asoni CAM434 Bedienungsanleitung
Asoni
Asoni CAM668F Bedienungsanleitung
Asoni
Asoni CAM417-PoE Bedienungsanleitung
Asoni
Asoni CAM6802T Bedienungsanleitung
Asoni
Asoni CAM414 Bedienungsanleitung
Asoni
Asoni CAM633 Bedienungsanleitung
Asoni
Asoni CAM678H Bedienungsanleitung
Asoni
Asoni CAM656D Bedienungsanleitung
Asoni
Asoni CAM737MIR Bedienungsanleitung
