Assa Abloy Corbin Russwin MP6600 Series Bedienungsanleitung

Installation Instructions

in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

FM556 08/20

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

WARNING

This product can expose you to lead

which is known to the state of California

to cause cancer and birth defects or other

reproductive harm. For more information

go to www.P65warnings.ca.gov.

MP6600 Series

Used with VN1 Escutcheon Trim and

V Series Indicators

Multi-Point Lock

MP6600 Series Multi-Point Lock

Installation Instructions

Used with VN1 Escutcheon Trim and V Series Indicators

FM556 08/20

in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

TOC Table of Contents

1 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

2 Indicator Variants. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

3 Lock Set Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

4 Rehanding Indicator (if required) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

5 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

a Prepare Door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

b Install Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

c Install Outside Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

d Install Inside Trim. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

e Install Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

f Install Outside Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

6 Indicator Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

MP6600 Series Multi-Point Lock

Installation Instructions

Used with VN1 Escutcheon Trim and V Series Indicators

FM556 08/20

in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

1 Tools Required

2 Indicator Variants

Depending on function and option ordered, indicators are provided in the following variations, these

instructions detail how to install with cylinder, however other variations follow similar instructions. (See

Figure 1 below)

• Contact factory with questions.

3 Lock set configuration

To set function of multi-function lock or to re-hand, see the instructions on the lock body.

Cylinder - For

installation on inside or

outside of door.

Thumbturn - For

installation on inside of

door.

Coin Turn - For

installation on

outside of door.

No input/blank - For

installation on inside

or outside of door.

Figure1

MP6600 Series Multi-Point Lock

Installation Instructions

Used with VN1 Escutcheon Trim and V Series Indicators

FM556 08/20

in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

4 Rehanding Indicator (if required)

Verify hand and bevel of door. See Figure 2 below.

Left Hand

Hinges Left

Open Inward

LHRB

Left Hand

Reverse Bevel

Hinges Left

Open Outward

Right Hand

Hinges Right

Open Inward

RHRB

Right Hand

Reverse Bevel

Hinges Right

Open Outward

Note:

Stand outside of locked door when determining door hand.

Next, verify inside and/or outside indicators are handed

correctly, using Spindle Cam Position chart. (Figure3)

If they are handed correctly, skip to Step 5 "Prepare Door".

If they are not handed correctly:

1. Remove indicator back plate by pulling out from top slot,

then remove spindle cam from assembly. (Figure4)

2. Position spindle cam in correct direction for door

hand. (Figure3)

Important:

• For thumbturn indicators, make sure thumbturn is

positioned in 12 o’clock direction as shown. (Figure5)

3. Slide spindle cam post into the correct slot of the

display slide. (Figure4)

4. Re-seat back plate into original position.

5. Return indicator to vacant/unlocked position for installation

Door Hand: RH / RHRB

Door Hand: LH / LHRB

Outside Indicator

Inside Indicator

Outside Indicator

Spindle Cam Position for Locks with Deadbolt (*and 56 function)

Door Hand: RH / RHRB

Door Hand: LH / LHRB

Outside Indicator

Inside Indicator

Outside Indicator

Spindle Cam Position for Locks without Deadbolt (*except 56 function)

Figure2

Figure3

Spindle

cam

Display

slide slot

Plate slot

for removal

Back plate

Thumbturn

position

Figure4

MP6600 Series Multi-Point Lock

Installation Instructions

Used with VN1 Escutcheon Trim and V Series Indicators

FM556 08/20

in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

5 Installation

aPrepare Door Inside of door

Lock

Screws

Outside

of door

RH door

shown

Figure6

bInstall Lock

Prepare door for function holes, size, and location according to

FM529 door marker templte, if not already prepped.

1. Verify strike location according to template. Clean out door

pocket and door edge of debris.

2. Ensure handing of lock and door match. Slide lock into door.

(Figure6)

3. Temporarily hand tighten two (2) lock screws (#12 x 1-1/4”

wood screws, or #12-24x 1/2”machine screws).

Note:

Keep door open until installation is complete.

cInstall Outside Trim

dInstall Inside Trim

1. Verify lock is in unlocked state (control hub slot should be vertical).

Also, verify indicator is in vacant/unlocked position.

2. Align trim posts with diagonal holes in door, be sure lever is

horizontal. Slide outside escutcheon assembly through lock body

from outside door face. (Figure7)

Note:

If indicator is used on outside, align indicator spindle with control hub.

Outside Escutcheon Assembly

Figure7

Figure8

Inside

Escutcheon

Assembly

Studio

Collection

Trim

Bushing

Adapter Plate

Spindle

Lever

Set

screw

#8-32 x 2-1/4" screw

#8-32 x

2-1/4"

screw

#8-32 x

5/8" screws

1. Slide spindle into lockbody hub. (Figure8)

2. Slide adapter and plate assembly over spindle.

3. Secure with two (2) #8-32 x 5/8" screws.

4. For Studio Collection levers only, use trim bushing over

adapter plate.

5. Verify lock is in unlocked state (turn outside lever to

ensure). Also, Verify indicator is in vacant/unlocked

position.

6. Align escutcheon over adapter and install inside

escutcheon assembly onto inside door face.

Note:

If indicator is used on inside, align indicator spindle with

control hub.

7. Through-bolt inside escutcheon to outside escutcheon

with two (2) #8-32 x 2-1/4"screws.

8. Install inside lever on adapter plate. Secure with set screw

Note: Screw heads should be visible on inside escutcheon.

MP6600 Series Multi-Point Lock

Installation Instructions

Used with VN1 Escutcheon Trim and V Series Indicators

FM556 08/20

in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

5 Installation, continued

eInstall Cylinder

Cylinder

Clamp

Screw

Figure 9

Incorrect

Key and cylinder must be rotated as shown.

Correct

Figure10

1. Thread cylinder into lock until flush with

escutcheon surface. (Figure9)

• Pull key slightly out of cylinder to help thread

into lock body.

2. Tighten cylinder clamp screw with #1 Phillips

screwdriver.

• Check operation and adjust cylinder if

necessary.

Notes:

• SARGENT logo must be horizontal and on

top. (Figure10)

• If double cylinder function is used, repeat

steps 1 and 2 for second cylinder.

• Removable Core or Interchangeable Core

cylinders require a control key (key stamped

with C) to remove and install the core. This is

not provided standard; it must be requested

separately. If requesting 1-bitted control key,

specify 113511 cut.

fInstall Outside Front

1. Tighten the two (2) lock screws completely. (Figure11)

2. Attach outside front with two (2) flat head screws #8-32 x 1/4.

Figure11

Lock

screw

Outside

front

Lock screw

#8-32 x

1/4" screws

gPerform Function Check

DO NOT FORCE if resistance is encountered during functional

check. Refer back to Rehanding Indicator (if required) section

to ensure correct handing. Rehand if necessary.

1. Insert key into cylinder (if present) and rotate:

• Ensure there is no friction against lock case or

any other obstructions.

2. Check key retracts latch:

• Key should rotate freely.

3. Throw deadbolt (if present):

• Check key retracts both deadbolt and latch.

4. Test levers:

• Confirm latch and deadbolt (if installed) retract.

5. Verify indicator displays correct status when locked

and unlocked

MP6600 Series Multi-Point Lock

Installation Instructions

Used with VN1 Escutcheon Trim and V Series Indicators

FM556 08/20

in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

6 Indicator Parts List

Figure12

Figure12 Description Req.

1 VN1 Indicator Escutcheon 1

2 Indicator Window 1

Indicator Display Assembly - Green Unlocked / Red Locked

Indicator Display Assembly - Green Vacant / Red Occupied

Indicator Display Assembly - Green Unlocked Icon / Red Locked Icon

Indicator Display Assembly - White Unlocked / Red Locked

Indicator Display Assembly - White Vacant / Red Occupied

Indicator Display Assembly - White Unlocked Icon / Red Locked Icon

4A Indicator Spindle Cam - Thumbturn / Coin Turn 1

4B Indicator Spindle Cam - Cylinder / No Input / Blank 1

4C Indicator Spindle Cam - 38 / 59 Function 1

5 Indicator Backing Plate 1

6 VN1 Escutcheon Screw Pack (Not shown) 1

7 Door Marker Template (Not shown) 1

* These parts are for 1-3/4"standard thickness doors. For other thicknesses, please contact factory.

Note:

Reference 8200 parts manual for all lock body parts.

Corbin Russwin is a brand associated with ASSA ABLOY Access and Egress Hardware Group, Inc., an ASSA ABLOY Group company.

without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

Corbin Russwin

225 Episcopal Road

Berlin, CT 06037 USA

Phone: 800-543-3558

FM556 08/20

Andere Handbücher für Corbin Russwin MP6600 Series

Inhaltsverzeichnis

Andere Assa Abloy Türschloss Handbücher

Assa Abloy

Assa Abloy Adams Rite 3000SE Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent Harmony Series Bedienungsanleitung

Assa Abloy

Assa Abloy IKON eCLIQ SPARK N112 Bedienungsanleitung

Assa Abloy

Assa Abloy ABLOY EL587 Bedienungsanleitung

Assa Abloy

Assa Abloy HES KS100 Aperio Handbuch

Assa Abloy

Assa Abloy effeff MAG-600SM Bedienungsanleitung

Assa Abloy

Assa Abloy effeff 843 Bedienungsanleitung

Assa Abloy

Assa Abloy effeff ANYKEY Bedienungsanleitung

Assa Abloy

Assa Abloy 8400 Bedienungsanleitung

Assa Abloy

Assa Abloy v.G1 Sargent Bedienungsanleitung

Assa Abloy

Assa Abloy Effeff 878 Bedienungsanleitung

Assa Abloy

Assa Abloy Lockwood Selector Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale eBoss 886F Series Bedienungsanleitung

Assa Abloy

Assa Abloy R10 Bedienungsanleitung

Assa Abloy

Assa Abloy ABLOY EL654 Bedienungsanleitung

Assa Abloy

Assa Abloy Lockwood Onyx 9A1A2/5PBLK Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent PE8300 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Lockwood Cavity Lock Bedienungsanleitung

Assa Abloy

Assa Abloy OneSystem type A Leitfaden

Assa Abloy

Assa Abloy Yale Pro SL Technische Daten

Assa Abloy

Assa Abloy Corbin Russwin ED5200N Series Bedienungsanleitung

Assa Abloy

Assa Abloy Aperio Bedienungsanleitung

Assa Abloy

Assa Abloy OneSystem N1940 Bedienungsanleitung

Assa Abloy

Assa Abloy 1125 Series Benutzerhandbuch

Beliebte Türschloss Handbücher anderer Marken

Iseo

Iseo MA1A Bedienungsanleitung

ID Lock

ID Lock 150 Bedienungsanleitung

Lockly

Lockly ACCESS TOUCH PRO Bedienungsanleitung

iLoq

iLoq G50S Bedienungsanleitung

SDC

SDC Z7835 Bedienungsanleitung

ilco

ilco 452 Bedienungsanleitung

Samsung

Samsung shs-h705 Bedienungsanleitung

TRU-BOLT

TRU-BOLT 08102017 Bedienungsanleitung

CDVI

CDVI 500-LADJ Bedienungsanleitung

Igloohome

Igloohome Deadbolt 2S Metal Grey Montage- und Wartungsanleitung

eSSL

eSSL FL-300 Bedienungsanleitung

Dorma

Dorma MUNDUS PREMIUM GK 50 Benutzerhandbuch

SCOOP

SCOOP Pullbloc 4.1 FS Panik Bedienungsanleitung

Yale

Yale MORTISE 8800 SERIES Bedienungsanleitung

Siegenia

Siegenia KFV AS3500 Bedienungsanleitung

Saflok

Saflok Quantum ädesē RFID Bedienungsanleitung

ArrowVision

ArrowVision Shepherd 210 Bedienungsanleitung

Baldwin

Baldwin 009 Series Bedienungsanleitung