Assa Abloy Lockwood Cavity Lock Bedienungsanleitung

ASSA ABLOY is the global

leader in door opening

solutions, dedicated to

satisfying end-user needs

for security, safety and

convenience

Please Note:

This document is provided as a dimensional reference and should not be printed as a drilling

template unless it can be correctly scaled to 100% by your printer.

ASSA ABLOY Australia Pty Limited

235 Huntingdale Road,

Oakleigh Victoria, 3166

Australia

info.au@assaabloy.com

assaabloy.com.au

ASSA ABLOY New Zealand Ltd.

6 Armstrong Road

Albany, North Shore City, 0632

New Zealand

info.nz@assaabloy.com

assaabloy.co.nz

Tear along perforated line

Mark line on the door face

approximately 900mm from

the floor. Tear along perforated

line on template. Fold page along

--- dashed line and place fold on

door edge. Align CL with marked

line on door face.

Find centre of door edge and

mark ready for drilling

Ø25mm latch hole.

Mark hole position ready for

drilling Ø54mm furniture.

If using a pre-prepared door,

use the

location of the second

Ø25mm hole.

(Go to step 6)

Drill Ø2mm pilot hole squarely

through the door.

template to mark the

3. Drill the second Ø25mm bolt

hole 70mm deep.

Insert bolt into Ø25mm holes,

mark around latch face plate.

Chisel out recess to suit face

plate. Face plate must be flush

with door face.

1. Drill Ø25mm latch hole to

depth of 70mm, ensure hole

is drilled squarely.

2. Drill a Ø54mm furniture hole,

from both sides of door to

prevent splintering.

Insert bolt, then drill Ø2mm

pilot holes and affix with screws

provided.

Press the retractable door pull

button to release it.

(Press it to reset).

Pull on the retractable door pull

to remove door from cavity.

Latching Passage Set door preparation and bolt with pull installation (steps 1 - 11)

Please ensure that all necessary safety precautions are taken when installing this product.

Find centre of

door edge and mark

ready for dril ing

Ø25mm bolt holes

Offset 37mm

- Ø54mm Hole saw

- Ø25mm Spade bit

- Ø2mm Drill bit

- Power drill

- 25mm Chisel

- Pencil

- Ruler or tape measure

- Phillips head screw driver

ools Required

Mark hole

position ready

for drilling Ø54mm

furniture hole.

Important Note

Drill hole from both sides of door

to prevent splintering of door face.

Backset 60mm

Fold here on door edge

Tear along perforated line

Guide only

5 10 15 20 25 30 35

Guide only

Door and pull preparation template

Fold here on door edge

1 2 3 4

6 7 85

9 10 11

CAVITY LOCK®32MM - 40M

DOOR THICKNESS

Sliding Door Furniture

INSTALLATION OF LATCHING

PASSAGE SET

1300 LOCK UP

lockweb.com.au

Q50117 A 042013

Latching Passage Set installation (steps 12 - 20)

Strike preparation and installation (steps 21 - 31) Door stop installation (step 32)

Furniture assembly Assembly shows both sides

interlocking.

Internal Furniture

Engages with the tailbar from

the bolt.

Internal Furniture in place. External Furniture

Engages with the tabs on the bolt.

est bolt with the thumb turn,

or coin edge in privacy version.

Fix furniture with the screws

provided.

Fit furniture side first. If door is less than 33 mm thick

use packers. Fit the packers to the

inner faces of the furniture,

against the door face.

Mark a vertical line down the

door jamb, along the edge of the

door.

Partially close door and mark

a horizontal line, centre of the

latch bolt on the door jamb.

Extend horizontal line along the

inside face of the door jamb.

Measure and halve the door

thickness.

From the vertical line on the

door jamb, measure and mark

half the door thickness. Draw a

second line.

Drill Ø25mm hole 20mm deep.

Strike basin measures 35mm

high.

Mark two lines symmetrically

either side of the Ø25mm hole

centre line.

Chisel out basin recess to depth

of hole.

Fit and mark around strike plate,

taking care to keep vertical.

Chisel out strike plate recess.

Strike plate must be flush with

jamb.

Drill Ø2mm pilot holes, affix with

screws provided.

A door stop is recommended

on the external door face when

using a key locking application.

12 13 14 15 16

17 18 19 20

23 24

3028

CAVITY LOCK®32MM - 40MM

DOOR THICKNESS

Sliding Door Furniture INSTALLATION OF LATCHING

PASSAGE SET

1300 LOCK UP

lockweb.com.au

Andere Assa Abloy Türschloss Handbücher

Assa Abloy

Assa Abloy IP2326N Betriebsanleitung

Assa Abloy

Assa Abloy 179A Benutzerhandbuch

Assa Abloy

Assa Abloy Lockwood 530 DX Series Bedienungsanleitung

Assa Abloy

Assa Abloy effeff Mini Magnet Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin ED5200N Series Bedienungsanleitung

Assa Abloy

Assa Abloy Lockwood Nexion Bedienungsanleitung

Assa Abloy

Assa Abloy EL460 Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Doorman Bedienungsanleitung

Assa Abloy

Assa Abloy ASSA 88x Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin Access 800 TCAC2 Series Installationshandbuch

Assa Abloy

Assa Abloy Sargent 8200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy multi-t-lock Code Handle Window Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Luna Pro Bedienungsanleitung

Assa Abloy

Assa Abloy ABLOY EL654 Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Delayed Egress Bedienungsanleitung

Assa Abloy

Assa Abloy 8788 Bedienungsanleitung

Assa Abloy

Assa Abloy Yale YDLL/BLK Fehlerbehebungshandbuch

Assa Abloy

Assa Abloy Corbin Russwin MP6600 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale YD-01-CON-NOMOD-PB Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT IN120 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin DL2200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent PE8700 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin MP9800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent PE8500 Series Bedienungsanleitung

Beliebte Türschloss Handbücher anderer Marken

Iseo

Iseo MA1A Bedienungsanleitung

ID Lock

ID Lock 150 Bedienungsanleitung

Lockly

Lockly ACCESS TOUCH PRO Bedienungsanleitung

iLoq

iLoq G50S Bedienungsanleitung

SDC

SDC Z7835 Bedienungsanleitung

ilco

ilco 452 Bedienungsanleitung

Samsung

Samsung shs-h705 Bedienungsanleitung

TRU-BOLT

TRU-BOLT 08102017 Bedienungsanleitung

CDVI

CDVI 500-LADJ Bedienungsanleitung

Igloohome

Igloohome Deadbolt 2S Metal Grey Montage- und Wartungsanleitung

eSSL

eSSL FL-300 Bedienungsanleitung

Dorma

Dorma MUNDUS PREMIUM GK 50 Benutzerhandbuch

SCOOP

SCOOP Pullbloc 4.1 FS Panik Bedienungsanleitung

Yale

Yale MORTISE 8800 SERIES Bedienungsanleitung

Siegenia

Siegenia KFV AS3500 Bedienungsanleitung

Saflok

Saflok Quantum ädesē RFID Bedienungsanleitung

ArrowVision

ArrowVision Shepherd 210 Bedienungsanleitung

Baldwin

Baldwin 009 Series Bedienungsanleitung