Assa Abloy Lockwood 1220 Series Bedienungsanleitung

P/No. 1220-321 - 0321

TURN KNOB MOUNTING INSTRUCTIONS

LOCKWOOD COMMERCIAL DOOR FURNITURE

B3570 SYNERGY SETTING AND HANDING

A3770 SELECTOR SETTING AND HANDING

SCREW REQUIRED TO SET FOR 3770 SELECTOR

SCREW REQUIRED TO SET HANDING

SET FOR LEFT HAND 3770 SET FOR RIGHT HAND 3770

45°

rotation

45°

rotation

ONE SCREW REQUIRED TO SET HANDING

SET FOR LEFT HAND 3570 SET FOR RIGHT HAND 3570

90°

rotation

90°

rotation

If mounting a disabled accessible turn, the escutcheon will need to be configured according to the mortice lock in use.

1. Refer to the images below to identify the mortice lock in use.

2. Position the screws according to the turn setting required.

Selector configurations should allow 45° rotation, Synergy configurations should rotate to 90°. Use images below as a guide.

1 Configuring Disabled Accessible Turn Escutcheon

SELECTOR MORTICE LOCK SYNERGY MORTICE LOCK

Stainless

steel plate

Narrow

auxiliary bolt

Wide

auxiliary bolt

Plain case

‘3570 Series’

‘3770 Series’

Turn knob Emergency

Turn

Disabled

Accessible Turn

Turn escutcheon examples: Tailbars for different turn escutcheon combinations:

P/No. TAILBAR-S1

Suits - 30-40mm doors

P/No. TAILBAR-E1

Suits 32-45mm doors

P/No. TAILBAR-S2

Suits - 40-50mm doors

Single side turn escutcheon only Privacy configuration

(Turn escutcheon both sides)

FOR THROUGH

FIX INSTALLATION

FOR THROUGH

FIX INSTALLATION

60mm BACKSET

89mm BACKSET

127mm BACKSET

60mm BACKSET

89mm BACKSET

127mm BACKSET

DRILL 2 HOLES

20mm DIA

FOR OVAL

CYLINDER ONLY

DRILL 2 HOLES

22mm DIA

FOR TURN

KNOB ONLY

DRILL

6.5mm DIA

DRILL

6.5mm DIA

FOLD ALONG THIS LINE AND

ALIGN TEMPLATE WITH EDGE OF DOOR

DRILL 2 HOLES

22mm DIA

FOR TURN

KNOB ONLY

DRILL 2 HOLES

20mm DIA

FOR OVAL

CYLINDER ONLY

TURN KNOB MOUNTING INSTRUCTIONS

LOCKWOOD COMMERCIAL DOOR FURNITURE

FOR THROUGH

FIX INSTALLATION

60mm BACKSET

89mm BACKSET

127mm BACKSET

DRILL 2 HOLES

20mm DIA

FOR OVAL

CYLINDER ONLY

DRILL 2 HOLES

22mm DIA

FOR TURN

KNOB ONLY

DRILL

6.5mm DIA

FOLD ALONG THIS LINE AND

FOR THROUGH

FIX INSTALLATION

60mm BACKSET

89mm BACKSET

127mm BACKSET

DRILL

6.5mm DIA

ALIGN TEMPLATE WITH EDGE OF DOOR

DRILL 2 HOLES

22mm DIA

FOR TURN

KNOB ONLY

2 Door Preparation

1. Cut out the template from the bottom of the sheet.

2. Remove lock from mortice and place the template in the correct

alignment according the the required backset.

3. Mark hole centres accurately and drill holes required.

4. For through fixing, cut screws to length. Deburr end of cut screws.

Note: Do not cut screws with pliers or side-cutters as this is likely

to cause thread damage upon assembly.

3 Mounting Instructions

Use the appropriate tailbar according to escutcheon combination being installed.

Follow instructions below for mounting each type of turn combination.

ASSA ABLOY Australia Pty Limited, 235 Huntingdale Rd, Oakleigh, VIC 3166 ABN 90 086 451 907 2021

Experience a safer and more open world

For single side turn escutcheon

P/No. TAILBAR-S1

Suits - 30-40mm doors

P/No. TAILBAR-S2

Suits - 40-50mm doors

1. Insert spring and tailbar into end of

turn knob as above. Push tailbar until

engaged and retained in turn knob.

Refer above for correct tailbar for your

door thickness.

2. Engage tailbar end into turn snib adaptor

as shown.

For privacy configuration (Turn escutcheon both sides)

P/No. TAILBAR-E1

Suits 32-45mm doors

1. Insert spring and narrow end

of tailbar into turn knob or

disabled accessible turn until

engaged and retained.

2. Pass tailbar completely through the turn

snib adaptor as shown.

3. Make sure tailbar engages with the turn

escutcheon on the other side of the lock.

Andere Assa Abloy Türschloss Handbücher

Assa Abloy

Assa Abloy SARGENT IN120 Bedienungsanleitung

Assa Abloy

Assa Abloy UNILOCK LOXURY IX Bedienungsanleitung

Assa Abloy

Assa Abloy Yale YDM3109A Bedienungsanleitung

Assa Abloy

Assa Abloy NORTON RIXSON CG0M19 Bedienungsanleitung

Assa Abloy

Assa Abloy RIXSON W73 Bedienungsanleitung

Assa Abloy

Assa Abloy Lockwood 8653 Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 2828 Series Bedienungsanleitung

Assa Abloy

Assa Abloy LOCKWOOD 3782 Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Assure Lock Lever Technische Daten

Assa Abloy

Assa Abloy Lockwood 530 DX Series Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent PR100 Bedienungsanleitung

Assa Abloy

Assa Abloy R10 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin FE5400S Series Bedienungsanleitung

Assa Abloy

Assa Abloy effeff 843 Bedienungsanleitung

Assa Abloy

Assa Abloy Emtek F20 Bedienungsanleitung

Assa Abloy

Assa Abloy v.G1 Sargent Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent PE80 Series Bedienungsanleitung

Assa Abloy

Assa Abloy 179C Bedienungsanleitung

Assa Abloy

Assa Abloy MSL sFlipLock drive Bedienungsanleitung

Assa Abloy

Assa Abloy NORTON RIXSON M19 Bedienungsanleitung

Assa Abloy

Assa Abloy CYE345 Bedienungsanleitung

Assa Abloy

Assa Abloy effeff MAG-600SM Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent PE8500 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Aptus Yale Doorman Bedienungsanleitung

Beliebte Türschloss Handbücher anderer Marken

Iseo

Iseo MA1A Bedienungsanleitung

ID Lock

ID Lock 150 Bedienungsanleitung

Lockly

Lockly ACCESS TOUCH PRO Bedienungsanleitung

iLoq

iLoq G50S Bedienungsanleitung

SDC

SDC Z7835 Bedienungsanleitung

ilco

ilco 452 Bedienungsanleitung

Samsung

Samsung shs-h705 Bedienungsanleitung

TRU-BOLT

TRU-BOLT 08102017 Bedienungsanleitung

CDVI

CDVI 500-LADJ Bedienungsanleitung

Igloohome

Igloohome Deadbolt 2S Metal Grey Montage- und Wartungsanleitung

eSSL

eSSL FL-300 Bedienungsanleitung

Dorma

Dorma MUNDUS PREMIUM GK 50 Benutzerhandbuch

SCOOP

SCOOP Pullbloc 4.1 FS Panik Bedienungsanleitung

Yale

Yale MORTISE 8800 SERIES Bedienungsanleitung

Siegenia

Siegenia KFV AS3500 Bedienungsanleitung

Saflok

Saflok Quantum ädesē RFID Bedienungsanleitung

ArrowVision

ArrowVision Shepherd 210 Bedienungsanleitung

Baldwin

Baldwin 009 Series Bedienungsanleitung