Assa Abloy Sargent 8200 Series Bedienungsanleitung

1-800-727-5477 • www.sargentlock.com

A8260D 11/21

Installation Instructions

7800 & 8200 Series Mortise Lock

Used with VN1 Escutcheon Trim and V Series Indicators

written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.

WARNING

This product can expose you to

lead which is known to the state of

California to cause cancer and birth

defects or other reproductive harm.

For more information go to www.

P65warnings.ca.gov.

Attention Installer: Improper

installation may result in dam-

age to the product and void the

factory warranty.

WARNING

1-800-727-5477 • www.sargentlock.com A8260D 11/21

7800 and 8200 Series Mortise Lock

Installation Instructions

Used with VN1 Escutcheon Trim and V Series Indicators

in part without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending

and/or patent www.assaabloydss.com/patents.

Tools Required

TOC Table of Contents

1 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2 Indicator Variants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3 Lock set configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

4 Rehanding Indicator (if required). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

5 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

a Prepare Door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

b Install Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

c Install Outside Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

d Install Inside Trim. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

e Install Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

f Install Outside Front. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

g Perform Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

h Indicator Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

#2 & #3 Phillips

head screwdrivers

Flat blade

screwdriver

1/8”Allen

Wrench

3/32"Drill bit T-20 Torx Screw

with Tamper Pin

Driver

1-800-727-5477 • www.sargentlock.com

7800 and 8200 Series Mortise Lock

Installation Instructions

Used with VN1 Escutcheon Trim and V Series Indicators

in part without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending

and/or patent www.assaabloydss.com/patents.

A8260D 11/21

Indicator Variants

Depending on function and option ordered, indicators are provided in

the following variations, these instructions detail how to install with

cylinder, however other variations follow similar instructions. (Figure1)

Contact factory for any questions.

Coin Turn - For

installation

on outside of

door.

Cylinder - For

installation

on inside or

outside of

door.

No input /

blank - For

installation

on inside or

outside of

door.

Thumbturn -

For installation

on inside of

door.

Figure1

Lock set configuration

To set function of multi-function lock or to re-hand, see instructions on

lock body.

Rehanding indicator (if required)

Indicator spindle cams MUST be oriented correctly per lock function and

door mounting location. Verify hand and bevel of door. (Figure2)

Left Hand

Hinges Left

Open Inward

Right Hand

Hinges Right

Open Inward

LHRB

Left Hand

Reverse Bevel

Hinges Left

Open Outward

RHRB

Right Hand

Reverse Bevel

Hinges Right

Open Outward

Figure2

Note:

Stand on outside of locked door when determining door hand.

Next, verify inside and/or outside indicators are handed correctly,

using Spindle Cam Position chart. (Figure3) If they are handed

correctly, skip to Step 5 "Prepare Door".

If they are not handed correctly:

1. Remove retaining pad and spindle cam from assembly. (Figure4)

2. Position spindle cam in correct direction for door hand. (Figure3)

Important:

• For thumbturn indicators, make sure thumbturn

is positioned in the 12 o’clock direction as

shown. (Figure5)

3. Slide spindle cam post into correct slot of display slide. (Figure4)

4. Re-seat retaining pad into original position.

5. Return indicator to the vacant/unlocked position for installation.

Scan this QR

code for the

Sargent Indicator

Handing Charts

Door Hand: RH / RHRB

Door Hand: LH / LHRB

Outside Indicator

Inside Indicator

Outside Indicator

Spindle Cam Position for Locks with Deadbolt (*and 56 function)

Door Hand: RH / RHRB

Door Hand: LH / LHRB

Outside Indicator

Inside Indicator

Outside Indicator

Spindle Cam Position for Locks without Deadbolt (*except 56 function)

Figure3

Figure4

Spindle

cam

Display

slide slot

Retaining

pad

Thumbturn

position

Figure5

1-800-727-5477 • www.sargentlock.com A8260D 11/21

7800 and 8200 Series Mortise Lock

Installation Instructions

Used with VN1 Escutcheon Trim and V Series Indicators

in part without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending

and/or patent www.assaabloydss.com/patents.

aPrepare Door

bInstall Lock

Installation

Figure6

Prepare door for function holes, size, and location according to A8258 door

marker template, if not already prepped.

1. Verify strike location according to template. Clean out door pocket and door edge of debris.

2. Ensure handing of lock matches handing of door. Slide lock into door. (Figure6)

3. Temporarily hand tighten two (2) lock screws (#12 x 1-1/4"wood screws, or #12-24 x1/2"machine screws).

Notes:

• Keep door open until installation is complete.

cInstall Outside Trim

dInstall Inside Trim

Inside of door

Lock

Screws

Outside

of door

RH door

shown

1. Verify lock is in unlocked state (control hub slot should be vertical).

Also, verify indicator is in vacant/unlocked position.

2. Align trim posts with diagonal holes in door, be sure lever is horizontal. Slide outside

escutcheon assembly through lock body from outside door face. (Figure7)

Note:

If indicator is used on outside, align indicator spindle with control hub. Outside Escutcheon Assembly

Figure7

1. Slide spindle into lockbody hub. (Figure8)

2. Slide adapter and plate assembly over spindle.

3. Secure with two (2) #8-32 x 5/8" screws.

4. For Studio Collection levers only, use trim bushing over adapter plate.

5. Verify lock is in unlocked state (turn outside lever to ensure).

Also, Verify indicator is in vacant/unlocked position.

6. Align escutcheon over adapter and install inside escutcheon assembly onto

inside door face.

Note:

• If indicator is used on inside, align indicator spindle with control hub.

7. Through-bolt inside escutcheon to outside escutcheon with

two (2) #8-32 x 2-1/4"screws.

8. Install inside lever on adapter plate. Secure with set screw.

Note:

Screw heads should be visible on inside escutcheon.

Figure8

Inside

Escutcheon

Assembly

Studio

Collection

Trim

Bushing

Adapter Plate

Spindle

Lever

Set

screw

#8-32 x 2-1/4" screw

#8-32 x

2-1/4"

screw

#8-32 x

5/8" screws

1-800-727-5477 • www.sargentlock.com

7800 and 8200 Series Mortise Lock

Installation Instructions

Used with VN1 Escutcheon Trim and V Series Indicators

in part without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending

and/or patent www.assaabloydss.com/patents.

A8260D 11/21

Installation, continued

eInstall Cylinder

fInstall Outside Front

1. Thread cylinder into lock until flush with escutcheon surface. (Figure9)

• Pull key slightly out of cylinder to help thread into lock body.

2. Tighten cylinder clamp screw with #1 Phillips screwdriver.

• Check operation and adjust cylinder if necessary.

Notes:

• SARGENT logo must be horizontal and on top. (Figure10)

• If double cylinder function is used, repeat steps 1 and 2 for second cylinder.

• Removable Core or Interchangeable Core cylinders require a control key (key

stamped with C) to remove and install the core. This is not provided standard;

it must be requested separately. If requesting 1-bitted control key, specify

113511 cut.

Cylinder

Clamp

Screw

Figure9

Incorrect

Key and cylinder must be rotated as shown.

Correct

Figure10

1. Tighten the two (2) lock screws completely. (Figure11)

2. Attach outside front with two (2) flat head screws #8-32 x 1/4".

gPerform Functional Check

DO NOT FORCE if resistance is encountered during functional check.

Refer back to Rehanding Indicator (if required) section to ensure

correct handing. Rehand if necessary.

1. Insert key into cylinder (if present) and rotate:

• Ensure there is no friction against lock case or any other obstructions.

2. Check key retracts latch:

• Key should rotate freely.

3. Throw deadbolt (if present):

• Check key retracts both deadbolt and latch.

4. Test levers:

• Confirm latch and deadbolt (if installed) retract.

5. Verify indicator displays correct status when locked and unlocked.

Figure11

Lock

screw

Outside

front

Lock screw

#8-32 x

1/4" screws

1-800-727-5477 • www.sargentlock.com A8260D 11/21

7800 and 8200 Series Mortise Lock

Installation Instructions

Used with VN1 Escutcheon Trim and V Series Indicators

in part without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending

and/or patent www.assaabloydss.com/patents.

Indicator Parts List

* These parts are for 1-3/4"standard thickness doors. For other thicknesses, please contact factory.

Note:

Reference 8200 Series parts manual for all lock body parts.

Figure12

Figure12 Description Part Number Req.

1 VN1 Indicator Escutcheon Consult Factory 1

2 Indicator Window 81-0811 1

Indicator Display Assembly - Green Unlocked / Red Locked 82-5602

Indicator Display Assembly - Green Vacant / Red Occupied 82-5603

Indicator Display Assembly - Green Unlocked Icon / Red Locked Icon 82-5604

Indicator Display Assembly - White Unlocked / Red Locked 82-5605

Indicator Display Assembly - White Vacant / Red Occupied 82-5606

Indicator Display Assembly - White Unlocked Icon / Red Locked Icon 82-5607

4A Indicator Spindle Cam - Thumbturn / Coin Turn 81-0745 1

4B Indicator Spindle Cam - Cylinder / No Input / Blank 81-0756* 1

4C Indicator Spindle Cam - 05, 37, 38, 59 Functions 81-5577* 1

5 Indicator Backing Plate 81-0748 1

6 VN1 Escutcheon Screw Pack (Not shown) 82-5587 x finish* 1

7 Door Marker Template (Not shown) A8258 1

1-800-727-5477 • www.sargentlock.com

7800 and 8200 Series Mortise Lock

Installation Instructions

Used with VN1 Escutcheon Trim and V Series Indicators

in part without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending

and/or patent www.assaabloydss.com/patents.

A8260D 11/21

WARNING

This product can expose you to lead

which is known to the state of California

to cause cancer and birth defects or other

reproductive harm. For more information go

to www.P65warnings.ca.gov. A8260D 11/21

Andere Handbücher für Sargent 8200 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Assa Abloy Türschloss Handbücher

Assa Abloy

Assa Abloy SARGENT 80 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Real Living YRDZW Technische Daten

Assa Abloy

Assa Abloy R10 Bedienungsanleitung

Assa Abloy

Assa Abloy Abloy EL648 Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Doorman Fehlerbehebungshandbuch

Assa Abloy

Assa Abloy Yale AYRD110 Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent PE8700 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent 6-Line Bedienungsanleitung

Assa Abloy

Assa Abloy Securitron UnLatch Handbuch

Assa Abloy

Assa Abloy Corbin Russwin Access 600 TCRNE1 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Real Living YRL210 Technische Daten

Assa Abloy

Assa Abloy MSL sFlipLock standard Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Essential YDME 70 Bedienungsanleitung

Assa Abloy

Assa Abloy HES 8000 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Real Living Assure Lock YRD216 Technische Daten

Assa Abloy

Assa Abloy effeff Security lock 309 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Lockwood Cavity Lock Bedienungsanleitung

Assa Abloy

Assa Abloy Effeff Technilock L4 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale YDM3115A Bedienungsanleitung

Assa Abloy

Assa Abloy PE920 Bedienungsanleitung

Assa Abloy

Assa Abloy Lockwood Onyx 9A1A2/5PBLK Bedienungsanleitung

Assa Abloy

Assa Abloy Adams Rite 3000SE Bedienungsanleitung

Assa Abloy

Assa Abloy CYE345 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin ED5200N Series Bedienungsanleitung

Beliebte Türschloss Handbücher anderer Marken

Iseo

Iseo MA1A Bedienungsanleitung

ID Lock

ID Lock 150 Bedienungsanleitung

Lockly

Lockly ACCESS TOUCH PRO Bedienungsanleitung

iLoq

iLoq G50S Bedienungsanleitung

SDC

SDC Z7835 Bedienungsanleitung

ilco

ilco 452 Bedienungsanleitung

Samsung

Samsung shs-h705 Bedienungsanleitung

TRU-BOLT

TRU-BOLT 08102017 Bedienungsanleitung

CDVI

CDVI 500-LADJ Bedienungsanleitung

Igloohome

Igloohome Deadbolt 2S Metal Grey Montage- und Wartungsanleitung

eSSL

eSSL FL-300 Bedienungsanleitung

Dorma

Dorma MUNDUS PREMIUM GK 50 Benutzerhandbuch

SCOOP

SCOOP Pullbloc 4.1 FS Panik Bedienungsanleitung

Yale

Yale MORTISE 8800 SERIES Bedienungsanleitung

Siegenia

Siegenia KFV AS3500 Bedienungsanleitung

Saflok

Saflok Quantum ädesē RFID Bedienungsanleitung

ArrowVision

ArrowVision Shepherd 210 Bedienungsanleitung

Baldwin

Baldwin 009 Series Bedienungsanleitung