Assa Abloy Sargent AD-PE8600 Bedienungsanleitung

1-800-727-5477 • www.sargentlock.com

Installation Instructions

permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.

WARNING

This product can expose you to

lead which is known to the state of

California to cause cancer and birth

defects or other reproductive harm.

For more information go to www.

P65warnings.ca.gov.

Attention Installer: Improper

installation may result in damage

to the product and void the factory

warranty.

WARNING

PE8600 Series (12-MD, MD, & AD)

Concealed Vertical Rod Exit Devices

A8305-1 5/23

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

PE8600 Series (12-MD, MD, & AD)

Installation Instructions

Concealed Vertical Rod Exit Devices

A8305-1 5/23

Screw Chart

SCREW

TOTAL QTY

SUPPLIED

WHERE USED

#10-24 X 3/4" FLAT HEAD

MACHINE SCREW

(4) CHASSIS

CORNER MOUNTING HOLES

#10-24 X 3/4" ROUND HEAD

MACHINE SCREW

(2) REAR MOUNTING PLATE

#10-24 X 3/8" FILLISTER HEAD

MACHINE SCREW

(1) INNER CHASSIS

TOP MOUNTING HOLE

#10-24 X 3/8" OVAL HEAD

MACHINE SCREW

(2) TOP CASE

(2) BOTTOM PLATE (IF AD)

1/4"-20 X 1/2" FLAT HEAD

MACHINE SCREW

2(2) BOTTOM PLATE

(MD OR FIRE RATED)

#10-24 X 1/2" U'CUT FLAT HEAD

MACHINE SCREW

(1) INNER CHASSIS

BOTTOM MOUNTING HOLE

(2) 640 OR 650 STRIKE, TOP

(METAL FRAME)

(2) 640 OR 650 STRIKE, BOTTOM

(METAL FRAME)

#10 X 1-1/4 FLAT HEAD

WOOD SCREW

(2) 650 STRIKE, TOP

(WOOD FRAME)

(2) 650 STRIKE, BOTTOM

(WOOD FRAME)

1/4"-20 X 2" FLAT HEAD

MACHINE SCREW W/ANCHOR

(2) 606 BOTTOM STRIKE

(FIRE RATED)

#8-32 X 5/16" W/ #6 OVAL HEAD

MACHINE SCREW

(4) CHASSIS COVER

(2) END CAP

1/4"-20 X 2-3/8" KNURLED FLAT HEAD

(2) EXIT TRIM

(IF USED)

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

A8305-1 5/23

PE8600 Series (12-MD, MD, & AD)

Installation Instructions

Concealed Vertical Rod Exit Devices

Rail Cutting Guide (Provided)

Support Block (Provided)

Equipment Needed

Tools

Before installation:

1. Fit and hang door.

2. Check the box’s label for the size of the exit device.

The surface of the door where the exit device is to be applied must be flush. Clear away

any raised projections to allow exit device to rest on the flat surface of the door. If shim

kit is required, contact your distributor.

Note: Please refer to trim and other installation instructions provided in the box.

Strike Pack for AD-PE8400

640 TOP AND BOTTOM STRIKE

#10 X 1/2"

PHILLIPS FLAT HEAD

MACHINE SCREW

(4 I N P A C K F O R T O P

AND BOTTOM S TRIKE)

Strike Pack for MD-PE8400 Strike Pack for 12-MD-PE8400

Strike Packs

MD-PE8600

AD-PE8600 12-MD-PE8600

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

PE8600 Series (12-MD, MD, & AD)

Installation Instructions

Concealed Vertical Rod Exit Devices

A8305-1 5/23

Template AD-PE8600, NB-AD-PE8600 & NB-MD-PE8600, MD-PE8600, 12-MD-PE8600

Omit holes for NB- AD version and all MD- versions.

.395

.300

.150

10-24 UNC - 2B

ONLY FOR RHRB

THRESHOLD IF USED

MUST LEAVE A MINIMUM

.350

ONLY FOR LHRB

ONLY FOR RHRB

.187

.811 2.388

AND DOUBLE DOORS)

CENTER LINE OF RAIL

ONLY FOR RHRB

FOR LHRB, SEE DETAIL A

NOTES:

DOOR PREPARATION SHOWN FOR INSIDE DOOR ONLY.

IF OUTSIDE PULL AND/OR OUTSIDE CONTROL IS USED, SEE APPROPRIATE DOOR TEMPLATE FOR OUTSIDE DOOR PREP.

WE RECOMENDED THAT ALL TAPPED HOLES BE DRILLED AND TAPPED IN FIELD.

TOLERANCE ALL FRACTIONAL DIMENSIONS

OPENING FOR

INSERTING DEVICE

OF RODS

MINIMUM CLEAR

OPENING FOR

INSERTING DEVICE

TOP OF DOOR

.811

.350

2.388

DETAIL A

SCALE 1 : 1

FEATURE FOR LHRB

For MD-bottom plate prep.

May be omitted for NB-MD

versions.

1/2

5/8

1/4-20 Tapped Holes (2 Places)

2-3/4

3/8

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

PE8600 Series (12-MD, MD, & AD)

Installation Instructions

Concealed Vertical Rod Exit Devices

A8305-1 5/23

*Note: The NB-AD-PE8600, NB-MD-PE8600 & the 12-NB-MD-PE8600 do not have a bottom rod assembly.

Exploded View

End cap

INSIDE

LEFT HAND

REVERSE

BEVEL

RIGHT HAND

REVERSE

BEVEL

THIS EXIT DEVICE IS HANDED

CHECK HAND OF DEVICE AGAINST APPLICATION

OUTSIDE

Push rail assembly

Center case chassis

Chassis cover

16- Cylinder Lockdown

(Exploded View For Clarity)

Slide mounting rail insert

with cylinder dogging

(16-prefix) into mounting

rail.

Top Chassis

Top Bolt

Chassis

*Bottom rod assembly

Mounting Plate

Rod silencer

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

A8305-1 5/23

PE8600 Series (12-MD, MD, & AD)

Installation Instructions

Concealed Vertical Rod Exit Devices

Remove door from frame, and prepare the door per template.

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

PE8600 Series (12-MD, MD, & AD)

Installation Instructions

Concealed Vertical Rod Exit Devices

A8305-1 5/23

Screw top bolt and rod assembly and bottom bolt

and rod assembly into the inner chassis.

*Bottom bolt rod and assembly will not be used with

NB devices.

Top bolt and rod assembly

*Bottom bolt and rod assembly

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

A8305-1 5/23

PE8600 Series (12-MD, MD, & AD)

Installation Instructions

Concealed Vertical Rod Exit Devices

Feed rod and inner chassis assembly into the door. Ensure teeth face down and top bolt teeth are opposite

the inside door prep.

Top bolt teeth

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

PE8600 Series (12-MD, MD, & AD)

Installation Instructions

Concealed Vertical Rod Exit Devices

A8305-1 5/23

FLAT HEAD SCREW

#10-24 x 1/2”

FILLISTER HEAD SCREW

#10-24 x 3/8”

Locate chassis on the fillister head screw (FF). Attach to the door with (4) #10-24 x 3/4 flat head screws (AA).

Do not fully tighten screws.

Attach inner case chassis to the door with (1) #10-24 x 1/2” flat head screw (HH) and secure with (1) #10-24

x 3/8” fillister head machine screw (FF). If P700 series trim is being used, it must be installed at this point. See

P700 instructions for details.

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

A8305-1 5/23

PE8600 Series (12-MD, MD, & AD)

Installation Instructions

Concealed Vertical Rod Exit Devices

Adjusting the top bolt and rod assembly

• 1/8” gap or less between door top and frame: Rotate bolt to make it even with the top of the door.

• 1/8” gap or greater: Bolt must extend above the door, equal to the gap, minus 1/8”.

Adjusting the bottom bolt and rod assembly (Not needed for NB exit devices)

• 1/8” gap or less between door bottom and high point: Rotate bolt to make it even with the top of the

door.

• 1/8” gap or greater: Bolt must extend below the door, equal to the gap, minus 1/8”.

Note: Rod must be retracted while adjusting bolt projection. Depress chassis lift arm to retract top bolt

and rod assembly.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Assa Abloy Türschloss Handbücher

Assa Abloy

Assa Abloy Securitron TSH Series Bedienungsanleitung

Assa Abloy

Assa Abloy R10 Bedienungsanleitung

Assa Abloy

Assa Abloy v.G1 Sargent Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent 52-4424 Leitfaden

Assa Abloy

Assa Abloy ENTR Bedienungsanleitung

Assa Abloy

Assa Abloy effeff ANYKEY 496 Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent PR100 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 6000 Series Kurzanleitung

Assa Abloy

Assa Abloy RIXSON 93 Bedienungsanleitung

Assa Abloy

Assa Abloy effeff 843 Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT IN120 Bedienungsanleitung

Assa Abloy

Assa Abloy Abloy EL648 Bedienungsanleitung

Assa Abloy

Assa Abloy PEMKO 3495 Bedienungsanleitung

Assa Abloy

Assa Abloy DC423.2 Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Real Living Assure Lock YRD216-ZW3 Montageanleitung

Assa Abloy

Assa Abloy MSL mFlipLock standard Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent 8200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy eCLIQ Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin HP3000 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Access 3 Bedienungsanleitung

Assa Abloy

Assa Abloy M32 Handbuch

Assa Abloy

Assa Abloy SARGENT KP8977 Leitfaden

Assa Abloy

Assa Abloy CYE345 Bedienungsanleitung

Assa Abloy

Assa Abloy ES8100 Montageanleitung

Beliebte Türschloss Handbücher anderer Marken

Iseo

Iseo MA1A Bedienungsanleitung

ID Lock

ID Lock 150 Bedienungsanleitung

Lockly

Lockly ACCESS TOUCH PRO Bedienungsanleitung

iLoq

iLoq G50S Bedienungsanleitung

SDC

SDC Z7835 Bedienungsanleitung

ilco

ilco 452 Bedienungsanleitung

Samsung

Samsung shs-h705 Bedienungsanleitung

TRU-BOLT

TRU-BOLT 08102017 Bedienungsanleitung

CDVI

CDVI 500-LADJ Bedienungsanleitung

Igloohome

Igloohome Deadbolt 2S Metal Grey Montage- und Wartungsanleitung

eSSL

eSSL FL-300 Bedienungsanleitung

Dorma

Dorma MUNDUS PREMIUM GK 50 Benutzerhandbuch

SCOOP

SCOOP Pullbloc 4.1 FS Panik Bedienungsanleitung

Yale

Yale MORTISE 8800 SERIES Bedienungsanleitung

Siegenia

Siegenia KFV AS3500 Bedienungsanleitung

Saflok

Saflok Quantum ädesē RFID Bedienungsanleitung

ArrowVision

ArrowVision Shepherd 210 Bedienungsanleitung

Baldwin

Baldwin 009 Series Bedienungsanleitung