Assa Abloy Sargent 52-4424 Leitfaden

Dieses Handbuch passt für folgende Modelle

2

Inhaltsverzeichnis

Andere Assa Abloy Türschloss Handbücher

Assa Abloy

Assa Abloy Yale Essential YDME 70 Bedienungsanleitung

Assa Abloy

Assa Abloy Lockwood Selector Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin Access 800 TCAC2 Series Installationshandbuch

Assa Abloy

Assa Abloy CYE345 Bedienungsanleitung

Assa Abloy

Assa Abloy Lockwood Cavity Lock Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent PE8700 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Valencia AJAX Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Assure Lock Lever Technische Daten

Assa Abloy

Assa Abloy Corbin Russwin CLX3300 Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Doorman Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent KP Series Installationshandbuch

Assa Abloy

Assa Abloy Yale Doorman Bedienungsanleitung

Assa Abloy

Assa Abloy Effeff EX118P Series Bedienungsanleitung

Assa Abloy

Assa Abloy KESO KEK i-handle S Bedienerhandbuch

Assa Abloy

Assa Abloy Yale nexTouch Technische Daten

Assa Abloy

Assa Abloy Access 3 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin ED3400 Series Bedienungsanleitung

Assa Abloy

Assa Abloy KESO KEK i-turn Bedienerhandbuch

Assa Abloy

Assa Abloy PEMKO 3495 Bedienungsanleitung

Assa Abloy

Assa Abloy Yale YDLL/BLK Fehlerbehebungshandbuch

Assa Abloy

Assa Abloy Effeff Technilock L4 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale YDD724A Bedienungsanleitung

Assa Abloy

Assa Abloy UNILOCK LOXURY IX Bedienungsanleitung

Assa Abloy

Assa Abloy ENTR Bedienungsanleitung

Beliebte Türschloss Handbücher anderer Marken

We.lock

We.lock SECBNEBL51 Bedienungsanleitung

Iseo

Iseo MA1A Bedienungsanleitung

ID Lock

ID Lock 150 Bedienungsanleitung

Lockly

Lockly ACCESS TOUCH PRO Bedienungsanleitung

iLoq

iLoq G50S Bedienungsanleitung

SDC

SDC Z7835 Bedienungsanleitung

ilco

ilco 452 Bedienungsanleitung

Samsung

Samsung shs-h705 Bedienungsanleitung

TRU-BOLT

TRU-BOLT 08102017 Bedienungsanleitung

CDVI

CDVI 500-LADJ Bedienungsanleitung

Igloohome

Igloohome Deadbolt 2S Metal Grey Montage- und Wartungsanleitung

eSSL

eSSL FL-300 Bedienungsanleitung

JAKO

JAKO JKBTNX4 Bedienungsanleitung

Dorma

Dorma MUNDUS PREMIUM GK 50 Benutzerhandbuch

SCOOP

SCOOP Pullbloc 4.1 FS Panik Bedienungsanleitung

Yale

Yale MORTISE 8800 SERIES Bedienungsanleitung

Siegenia

Siegenia KFV AS3500 Bedienungsanleitung

Saflok

Saflok Quantum ädesē RFID Bedienungsanleitung

Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

12/14/10

1 A8094A

S1/S2 Replacement Controller Instructions

52-4424, 52-4425, 52-4426

FOR INSTALLATION ASSISTANCE CONTACT SARGENT • 1-800-810-WIRE (9473) • www.sargentlock.com

Through-bolt Screws

1. On the inside of the door, remove the battery cover’s security screw.

2. Lift and remove the battery cover.

5. Disconnect gray ribbon cables, green grounding wire,

motor harness, DPS harness, and hard-wired harness/PoE

(if present). Remove inside assembly from the door.

6. Remove the four (4) Philips screws holding the original

controller in place. Remove controller.

This controller has been conﬁgured as a generic replacement.

The serial number MUST be changed before it can be used!

(For serial conﬁguration see Step #12.)

Security Screw

3. Remove inside lever (if present).

4. Remove through-bolt screws on top and bottom of

escutcheon.

7. Seat the controller into inside escutcheon. Attach with

the four (4) original Philips screws.

A8094A 2

12/14/10 Copyright © 2009 Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

FOR INSTALLATION ASSISTANCE CONTACT SARGENT • 1-800-810-WIRE (9473) • www.sargentlock.com

S1/S2 Replacement Controller Instructions

52-4424, 52-4425, 52-4426

8. Reconnect the keypad harness, ground wire, DPS

harness, motor harness, and hard-wired/PoE harness

(if present).

9. Mount the inside escutcheon back on the door using the

two through-bolt screws. Reattach lever (if applicable).

10. Install batteries and battery keeper (if applicable).

11. Using Lock Conﬁguration Tool (LCT), connect to the

new controller.

12. From the main drop down, select “Conﬁgure Serial

Number”.

13. Select “Conﬁgure Serial Number in LCT” and click Go.

14. Select the correct reader/human interface.

15. Select the correct lock body.

16. Click Apply Serial Number (S/N).

17. Conﬁgure lock as usual.

Note: The serial number should match the serial

number on the previous controller which can either

be found on the controller or through the connected

EAC system.

18. Replace battery cover and install security screw.