Assa Abloy Sargent PE8600 Series Bedienungsanleitung

1-800-727-5477 • www.sargentlock.com

Installation Instructions

permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.

WARNING

This product can expose you to

lead which is known to the state of

California to cause cancer and birth

defects or other reproductive harm.

For more information go to www.

P65warnings.ca.gov.

Attention Installer: Improper

installation may result in damage

to the product and void the factory

warranty.

WARNING

PE8600 Series (12-WD, WD, NB-12-WD, & NB-WD)

Concealed Vertical Rod Exit Devices

A8315-1 5/23

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

PE8600 Series (12-WD, WD, NB-12-WD & NB-WD)

Installation Instructions

Concealed Vertical Rod Exit Devices

A8315-1 5/23

Screw Chart

DESCRIPTION

TOTAL QTY

SUPPLIED

WHERE USED

#10 X 1-1/4" FLAT HEAD

WOOD SCREW

(4) CHASSIS

CORNER MOUNTING HOLES

(2) INNER CHASSIS PLATE

(2) 650 STRIKE, TOP

(WOOD FRAME)

(2) 650 STRIKE, BOTTOM

(WOOD FRAME)

#10 X 1-1/4" ROUND HEAD

WOOD SCREW

(2) REAR MOUNTING PLATE

(WOOD DOOR)

#10-24 X 3/8" FILLISTER HEAD

MACHINE SCREW

(1) INNER CHASSIS

#12 X 2" FLAT HEAD

WOOD SCREW

(4) TOP CASE BRACKET

1/4" X 1/2" FLAT HEAD

WOOD SCREW

(2) BOTTOM BRACKET

#10-24 X 1/2" U'CUT FLAT HEAD

MACHINE SCREW

(2) 650 STRIKE, TOP

(METAL FRAME)

(2) 650 STRIKE, BOTTOM

(METAL FRAME)

1/4"-20 X 2" FLAT HEAD

MACHINE SCREW W/ANCHOR

(2) 606 BOTTOM STRIKE

(FIRE RATED)

#8-32 X 5/16" W/ #6 OVAL HEAD

MACHINE SCREW

(4) CHASSIS COVER

(2) END CAP

1/4"-20 X 2-3/8" KNURLED FLAT HEAD

MACHINE SCREW

(2) EXIT TRIM

(IF USED)

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

A8315-1 5/23

PE8600 Series (12-WD, WD, NB-12-WD & NB-WD)

Installation Instructions

Concealed Vertical Rod Exit Devices

Rail Cutting Guide (Provided)

Support Block (Provided)

Equipment Needed

Tools

Before installation:

1. Fit and hang door.

2. Check the box’s label for the size of the exit device.

The surface of the door where the exit device is to be applied must be flush. Clear away

any raised projections to allow exit device to rest on the flat surface of the door. If shim

kit is required, contact your distributor.

Note: Please refer to trim and other installation instructions provided in the box.

Strike Packs

Strike Pack for

WD-PE8600

Strike Pack for 12-WD-PE8600

*Note: The NB-WD-PE8600, 12-NB-WD-PE8600 do not have a bottom strike.

650 Top Strike Pack NB-WD-PE8600

& 12-NB-WD-PE8600

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

PE8600 Series (12-WD, WD, NB-12-WD & NB-WD)

Installation Instructions

Concealed Vertical Rod Exit Devices

A8315-1 5/23

Template for WD-PE8600, 12-WD-PE8600, NB-WD-PE8600 and NB-12-WD-PE8600

with P700 Series Trim

39-5/8”

The P700-4 series trim needs to be attached through the door with (2) 1/4-20 x 2-3/8” flat head

machine screws (GG).

P700 SERIES

TRIM

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

PE8600 Series (12-WD, WD, NB-12-WD & NB-WD)

Installation Instructions

Concealed Vertical Rod Exit Devices

A8315-1 5/23

Exploded View

End cap

INSIDE

LEFT HAND

REVERSE

BEVEL

RIGHT HAND

REVERSE

BEVEL

THIS EXIT DEVICE IS HANDED

CHECK HAND OF DEVICE AGAINST APPLICATION

OUTSIDE

Push rail assembly

Inner

chassis

Chassis cover

16- Cylinder Lockdown

(Exploded View For Clarity)

Slide mounting rail insert

with cylinder dogging

(16-prefix) into mounting

rail.

Top Chassis

Top rod assembly

Chassis

*Bottom rod assembly

Mounting Plate

Rod silencer

*Note: The NB-WD-PE8600 and the 12-NB-WD-PE8600 do not have a bottom rod assembly.

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

A8315-1 5/23

PE8600 Series (12-WD, WD, NB-12-WD & NB-WD)

Installation Instructions

Concealed Vertical Rod Exit Devices

Install inner chassis into door prep.

Note: Wood doors must be prepared by a wood door manufacturer.

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

PE8600 Series (12-WD, WD, NB-12-WD & NB-WD)

Installation Instructions

Concealed Vertical Rod Exit Devices

A8315-1 5/23

Mark inner chassis mounting holes.

Remove the inner chassis. Pilot

drill inner chassis mounting holes

for #10 wood screws.

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

A8315-1 5/23

PE8600 Series (12-WD, WD, NB-12-WD & NB-WD)

Installation Instructions

Concealed Vertical Rod Exit Devices

Install the inner chassis

using two (2) #10 x 1-1/4”

screws (CC).

Install #10-24 x 3/8” fillister screws (HH) to

the inner chassis.

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

PE8600 Series (12-WD, WD, NB-12-WD & NB-WD)

Installation Instructions

Concealed Vertical Rod Exit Devices

A8315-1 5/23

Slide bottom rod into the door and thread into the inner chassis.

• Slide top rod into the door and thread

into the inner chassis.

• Ensure the teeth on the top bolt are

facing opposite of the inside face of the

door.

top bolt

teeth

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

A8315-1 5/23

PE8600 Series (12-WD, WD, NB-12-WD & NB-WD)

Installation Instructions

Concealed Vertical Rod Exit Devices

• Locate the center chassis on the door

by keying it to the fillister head screw

projecting off the door face.

• Mark the four corner mounting holes.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Assa Abloy Türschloss Handbücher

Assa Abloy

Assa Abloy NORTON RIXSON CG0M19 Bedienungsanleitung

Assa Abloy

Assa Abloy ES100 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin Access 600 CL33600 TCRNE1... Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin MP9800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy effeff ANYKEY 496 Bedienungsanleitung

Assa Abloy

Assa Abloy IP2326N Betriebsanleitung

Assa Abloy

Assa Abloy KESO Genie Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin CL3300 Series Bedienungsanleitung

Assa Abloy

Assa Abloy mFlipLock standard Bedienungsanleitung

Assa Abloy

Assa Abloy Yale YDME 50 Pro Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin Access 700 ED5000N Series Bedienungsanleitung

Assa Abloy

Assa Abloy MSL mFlipLock standard Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent Passport 1000 PG Bedienungsanleitung

Assa Abloy

Assa Abloy effeff Mini Magnet Bedienungsanleitung

Assa Abloy

Assa Abloy Pemko 4131RL Bedienungsanleitung

Assa Abloy

Assa Abloy ML52RA Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 2828 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin DL2200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin Access 600 CL33600 TCRNE1... Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin FE6600 Series Bedienungsanleitung

Assa Abloy

Assa Abloy 1264 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin Access 600 TCRNE1 Series Bedienungsanleitung

Assa Abloy

Assa Abloy MSL sFlipLock standard Bedienungsanleitung

Assa Abloy

Assa Abloy Rixson 73ER Bedienungsanleitung

Beliebte Türschloss Handbücher anderer Marken

Iseo

Iseo MA1A Bedienungsanleitung

ID Lock

ID Lock 150 Bedienungsanleitung

Lockly

Lockly ACCESS TOUCH PRO Bedienungsanleitung

iLoq

iLoq G50S Bedienungsanleitung

SDC

SDC Z7835 Bedienungsanleitung

ilco

ilco 452 Bedienungsanleitung

Samsung

Samsung shs-h705 Bedienungsanleitung

TRU-BOLT

TRU-BOLT 08102017 Bedienungsanleitung

CDVI

CDVI 500-LADJ Bedienungsanleitung

Igloohome

Igloohome Deadbolt 2S Metal Grey Montage- und Wartungsanleitung

eSSL

eSSL FL-300 Bedienungsanleitung

Dorma

Dorma MUNDUS PREMIUM GK 50 Benutzerhandbuch

SCOOP

SCOOP Pullbloc 4.1 FS Panik Bedienungsanleitung

Yale

Yale MORTISE 8800 SERIES Bedienungsanleitung

Siegenia

Siegenia KFV AS3500 Bedienungsanleitung

Saflok

Saflok Quantum ädesē RFID Bedienungsanleitung

ArrowVision

ArrowVision Shepherd 210 Bedienungsanleitung

Baldwin

Baldwin 009 Series Bedienungsanleitung