Assa Abloy Norton 8000H Series Bedienungsanleitung

in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 80-9380-3207-020 Rev 1 05/19

Hold Open Arm Models

8000H

Non Handed Door Closer

Regular Arm

Top Jamb Mount

Parallel Arm

With or without DA sufx (delayed action)

Ce produit peut vous exposer au plomb qui, dans l’état de la Californie,

est reconnu pour causer le cancer, des anomalies congénitales ou d’autres

problèmes de reproduction. Pour plus d’informations, visitez:

www.P65warnings.ca.gov.

This product can expose you to lead which is known to the state of

California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65warnings.ca.gov.

WARNING

Regular Arm Top Jamb Mount

*Included Components

8148

Plate

1628H Soffit Plate

Used with Parallel

Arm Closers Only

Soffit Adapter Plate

Parallel Arm

Optional Plates

Legacy Friction Hold Open Arm

Right Hand Door - RH

Left Hand Reverse - LHR

Left Hand Door - LH

Right Hand Reverse - RHR

Right Hand Door - RH

Left Hand Reverse - LHR

Left Hand Door - LH

Right Hand Reverse - RHR

Note: Legacy FHO

arm has installation

orientation.

See 80-9300-0003-000

for details.

Tools Needed

TO DETERMINE

HAND OF

YOUR DOOR:

LEFT

HAND

DOOR

RIGHT

HAND

DOOR

Right Hand

Reverse

Left Hand

Reverse

To Determine Your Hand of Door:

To Identify Your Model:

Right Hand Door - RH

Left Hand Reverse - LHR

Left Hand Door - LH

Right Hand Reverse - RHR

Optional Covers

permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

280-9380-3207-020 Rev 1 05/19

Use provided hex wrench to turn valves.

NEVER force valves out of closer. NEVER

completely close backcheck valve.

Door must be open to adjust spring

closing power. Refer to chart. Do not use

a power drill. Warranty will be void.

Before You Begin

• “DA” sufx (Delayed Action) is an optional feature.

• For special applications, a separate door and frame

preparation template is packed with these instructions. Use

this instruction sheet for installation sequence and closer

adjustments only.

• Doors should be hung on ball bearing or anti-friction hinges.

Mounting Hardware Door or Frame Drill

Closer, H/O Shoe or Optional PA Bracket:

1/4-14 x 1-1/2 Oval Flat Head Mach. Screw Wood 3/16" (4.76mm)

Closer, H/O Shoe or Optional PA Bracket:

1/4-20 x 3/4 Oval Flat Head Mach. Screw Metal Drill #7 (.201 dia. or 5.10mm)

Tap 1/4-20

H/O Shoe to Optional PA Bracket:

1/4-20 x 1/2 Oval Flat Head Mach. Screw

Closer:

Sleeve Nut and Bolt (SNB)

(optional)

Hollow Metal 9/32" (7.00mm) thru

3/8" (9.50mm) door face opposite to closer

Aluminum or Wood 3/8" (9.50mm) thru

Closer:

Thru Bolt and Grommet Nut (TBGN)

(optional)

All

9/32" (7.00mm) thru

3/8" (9.50mm) dia. x 3/8" (9.500mm) deep,

door face opposite to closer

• A separate door stop is recommended.

• Always consult door/frame manufacturer for fastener compatibility.

• Door and frame must be properly reinforced.

• Adjust closing time speed between 3 and 7 seconds from 90° to 0°.

Greater closing times may be required for elderly or handicapped.

• These door closers should NOT be installed on exposed side

(weather side) of exterior doors.

• Dimensions are given in inches (millimeters).

ATTENTION:

An incorrectly installed or improperly adjusted door closer can

cause property damage or personal injury. These installation

instructions should be followed to avoid the possibility of

misapplication or misadjustment.

Closer Adjustments

Do not over tighten

cap or cover screws.

Pinion Cap and Cover

Latch

Backcheck

Sweep

Architectural (“A”) covers

cannot be used on parallel

mounted closers with doors

swinging over 120°.

Regular Arm Top Jamb Mount Parallel Arm

Optional

Delayed Action

permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9380-3207-020 Rev 1 05/19

1. Prepare door and frame.

2. Mount closer to door. 3a. Remove dial from

Hold Open arm.

4. Connect arms, preload spring

and tighten set screw.

3b. Install separate arms.

8000H Regular Arm Installation (Right Hand Shown)

Opening

To 100°

101° to 130°

131° to *180°

7-1/2

(191)

(152)

4-1/2

(114)

Dimension "A"

Door/Wall/Hardware/Jamb

*conditions permitting

5-1/2

(140)

1-3/4

(44)

1-1/4

(33)

3/4

(19)

1-5/8

(41)

(304.8)

You’ve installed the 8000H Hold Open Closer - Regular Arm.

🛑

Go to page 2 for closer adjustments and decorative cap or cover installation.

Dial DOWN

Left and Right Hand

RH and LH:

Position at at S

1st

2nd 3rd

1st

3rd 2nd

Rotate elbow until

Hold Open arm is

perpendicular to frame.

Rotating arm

preloads closer

spring power.

RH:

Clockwise

to tighten.

LH: Counter

clockwise to

tighten.

1st

3rd

2nd

5. Set Hold Open. Keep door open in position

until dial screw secures dial.

permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

480-9380-3207-020 Rev 1 05/19

8000H Top Jamb Mount Installation (Right Hand Shown)

1. Prepare door and frame.

2. Mount closer to frame.

Door/Wall/Hardware/Jamb

conditions permitting

Opening

To 100°

101° to 130°

131° to *180°

7-1/2

(191)

(152)

4-1/2

(114)

Dimension "A"

A longer connecting

rod is required

for reveals greater

than 3" (76)

Reveal

3a. Remove dial from

Hold Open arm.

3b. Install separate arms.

(304.8) 3/4

(19)

1/2

(13)

5-1/2

(140)

1-7/8

(48)

1-3/4

(44)

Top of

Frame

You’ve now installed the 8000H Hold Open Closer - Top Jamb Mount.

🛑

Go to page 2 for closer adjustments and decorative cap or cover installation.

Dial DOWN

Left and Right

Hand

RH and LH:

Position at at S

5. Set Hold Open.

1st

2nd

3rd

Rotate elbow until

Hold Open arm is

perpendicular to frame.

Rotating arm

preloads closer

spring power.

Keep door open in position

until dial screw secures dial.

3rd

1st

3rd

1st

2nd

RH:

Clockwise

to tighten.

LH: Counter

clockwise to

tighten.

2nd

4. Connect arms, preload spring

and tighten set screw.

permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9380-3207-020 Rev 1 05/19

8000H Parallel Arm Installation (Right Hand Shown)

1. Prepare door and frame.

2. Close latch and sweep

valves.

4. Install soft plate and mount closer.

5. Install Hold Open arm to plate. 6. Place main arm on closer spindle and rotate.

Dial DOWN

Left and Right Hand

3. Remove dial from

Hold Open arm.

IMPORTANT

Door/Wall/Hardware/Jamb

*conditions permitting

Door

Opening

To 120°

121° to 180°

9-1/2

(241)

(178)

3-3/4

(95)

1-1/4

(32)

2-3/4

(70)

3/8

(10)

1/2

(13)

7/16

(11)

(50)

3-5/8

(92)

3/4

(19)

Top of

Door

Frame

(304.8)

in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

www.nortondoorcontrols.com

Norton Technical Product Support:

Monroe, NC 28112 USA

Phone: 800.438.1951 ext: 6030

TechSupport.Norton@assaabloy.com

80-9380-3207-020 Rev 1 05/19

8000H Parallel Arm Installation (Right Hand Shown) continued

7. Remove arm and attach as shown. 8. Open latch and sweep valves.

9. Connect arms, preload spring and

tighten set screw.

10. Set Hold Open.

Do not completely

open valves. Valves

will leak.

Arm under tension.

Keep ngers away

from moving parts.

1-1/2

(38)

1st

2nd

3rd

5th

4th

By hand,

position arm

elbow to be

1-1/2" from

door face.

You’ve now installed the 8000H Hold Open Closer - Parallel Arm.

🛑

Go to page 2 for closer adjustments and decorative cap or cover installation.

Rotating arm

preloads closer

spring power.

Keep door open in position

until dial screw secures dial.

1st

3rd

2nd

RH:

Clockwise

to tighten.

LH: Counter

clockwise to

tighten.

2nd

1st

2nd

RH: Position at at R

LH: Position at at L

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Assa Abloy Türöffnungssystem Handbücher

Assa Abloy

Assa Abloy Rockwood OH200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy DC 700G-FT BGS Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SW300 Bedienungsanleitung

Assa Abloy

Assa Abloy h.e.s. 9100 Series Handbuch

Assa Abloy

Assa Abloy Sargent 281 Series Bedienungsanleitung

Assa Abloy

Assa Abloy G-S Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin DC6200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy DC3210 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin ED8200A Series Bedienungsanleitung

Assa Abloy

Assa Abloy Pando Mini Go Bedienungsanleitung

Assa Abloy

Assa Abloy 332 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Effeff 843G Bedienungsanleitung

Assa Abloy

Assa Abloy G-CO-FMS Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin DC8200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy RIXSON W73ER Bedienungsanleitung

Assa Abloy

Assa Abloy NORTON RIXSON 6300 Series Bedienungsanleitung

Assa Abloy

Assa Abloy King 640 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 7700ST Bedienungsanleitung

Assa Abloy

Assa Abloy DC640 Bedienungsanleitung

Assa Abloy

Assa Abloy 5800 ADAEZ PRO Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED159 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton Narrow Profile Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 7900H-B Series Bedienungsanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

TriMark

TriMark UM 34 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung

MPC

MPC ATD ACTUATOR 50 ATD-313186 Operating and Technisches Datenblatt

GEZE

GEZE ECturn Bedienungsanleitung

Chamberlain

Chamberlain T Bedienungsanleitung