Assa Abloy Rockwood OH200 Series Bedienungsanleitung

Template No.

T-OH200

Rev. 04/24/12

NOTE: Rockwood reserves the right to make product changes and is not

responsible for obsolete template errors. To ensure your template is current,

please visit our website at www.rockwoodmfg.com or call us at 800-458-2424.

OH200 Series Concealed Door Stops and Holders

300 Main Street • Rockwood, PA 15557 • P: 800-458-2424 • F: 800-922-9212 • Website: www.rockwoodmfg.com

Rev. A

INSTALLATION INSTRUCTIONS

1. Select proper dimensions from chart on opposite

side of page.

NOTE: Add 5/8" to "A" dimension for dead stop.

2. Locate "B" dimension on frame and mortise 3/16"

deep for jamb bracket as shown.

3. Locate "A" and "F" dimensions on centerline of door

and mortise 13/16" wide x 7/8" deep for channel.

1/16" head clearance shown. Coordinate the arm

and rail cutout dimensions if head clearance varies.

4. Locate "C" and "E" dimensions on top of door and

mortise 1/4" deep as shown for arm clearance.

5. Install door stop or holder with screws provided.

NOTES:

• All hollow metal frames are to be provided with

3/16" min. thickness x 12" min. length

reinforcement plates.

• All hollow metal doors are to be properly reinforced

as shown.

• If dead stop is required add 5/8" to "A" dimension

as noted on opposite side of page.

• A, B and C dimensions are measured from

centerline of pivot, not edge of door.

• Reversible, non-handed.

• All dimensions are given in inches.

FASTENERS:

Jamb: #12-24 x 1/2" FH MS or #12 x 1-1/2" FH WS.

Door: #12-24 x 1-1/2" FH MS or #12 x 1-1/2" FH WS.

CAUTION: Note location

of swing clear hinge

centerline to determine

"A" and "B" dimensions.

Not To Scale

Template No. T-OH200

Rev. 04/24/12

OH200 Series Concealed Door Stops and Holders

300 Main Street • Rockwood, PA 15557 • P: 800-458-2424 • F: 800-922-9212 • Website: www.rockwoodmfg.com

Rev. A

NOTE: Rockwood reserves the right to make product changes and is not responsible for obsolete template errors.

To ensure your template is current, please visit our website at www.rockwoodmfg.com or call us at 800-458-2424.

Device Number

1-3/4 - 2-1/4

Butts

3/4 Offset

Pivot

Device Number

When using center hung pivots, check pivot manufacturer's compatibility prior to specifying.

OH200 Series Concealed Door Stops and Holders

1. See other side for installation instructions.

2. Select proper dimensions noted below.

3. Add 5/8" to "A" dimension for dead stop.

4. All dimensions given in inches.

TO SELECT DEGREE OF STOP

1. With a 3/16 hex key wrench, loosen the set screw in the shock block.

2. Open door to desired degree of opening.

3. Slide shock block and spring until the spring touches slider cam.

4. Tighten set screw.

5. Verify door opening position and re-adjust, as needed.

* Butt mounting only. Reversible, non-handed.

Center

Hung

Stop Multi Door Opening A B C E F

201S 201M *18 - 24 1-3/16 3-11/16 0 15-5/16 15-7/8

202S 202M 24-1/16 - 30 4 4-3/8 2-9/16 16-9/16 17-1/16

203S 203M 30-1/16 - 36 6-3/4 5-9/16 4-11/16 19 18-13/16

204S 204M 36-1/16 - 42 9-7/8 7-1/4 6-3/8 23 21-1/4

205S 205M 42-1/16 - 48 13-13/16 8-1/2 7-5/8 27-1/2 23-1/16

Stop Multi Door Opening A B C E F

- - - - - - - -

202S 202M 27 - 32 5-7/16 6-1/8 5-1/4 15-5/8 17-1/16

203S 203M 32-1/16 - 38-1/2 7-3/16 6 5-9/32 19 18-13/16

204S 204M 38-9/16 - 45 10-5/16 7-11/16 6-13/16 23 21-1/4

205S 205M 45-1/16 - 48 14-1/4 8-15/16 8-1/16 27-1/2 23-1/16

Inhaltsverzeichnis

Andere Assa Abloy Türöffnungssystem Handbücher

Assa Abloy

Assa Abloy effeff 828 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5400 FE Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 7970DPS-B Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin ED5400 (A) Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 3828 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 1600 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5000 DB Series Bedienungsanleitung

Assa Abloy

Assa Abloy UNION DoorSense 8755A Bedienungsanleitung

Assa Abloy

Assa Abloy G-S Bedienungsanleitung

Assa Abloy

Assa Abloy G-FMS Bedienungsanleitung

Assa Abloy

Assa Abloy Yale 6000 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SW300 Handbuch

Assa Abloy

Assa Abloy Norton 5900 Series Kurzanleitung

Assa Abloy

Assa Abloy Norton 8000H Series Bedienungsanleitung

Assa Abloy

Assa Abloy G-CO-CS Bedienungsanleitung

Assa Abloy

Assa Abloy ABLOY DA401 Bedienungsanleitung

Assa Abloy

Assa Abloy DC340DA Bedienungsanleitung

Assa Abloy

Assa Abloy RD150-3 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5000 DB Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT FM8700 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 9300BCH Bedienungsanleitung

Assa Abloy

Assa Abloy Lockwood 724 Series Bedienungsanleitung

Assa Abloy

Assa Abloy SW100 Bedienungsanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

TriMark

TriMark UM 34 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung

MPC

MPC ATD ACTUATOR 50 ATD-313186 Operating and Technisches Datenblatt

GEZE

GEZE ECturn Bedienungsanleitung

Chamberlain

Chamberlain T Bedienungsanleitung