Assa Abloy Corbin Russwin PED5800 Series Bedienungsanleitung

Installation Instructions

WARNING

This product can expose you to

lead which is known to the state of

California to cause cancer and birth

defects or other reproductive harm.

For more information go to www.

P65warnings.ca.gov.

Attention Installer: Improper

installation may result in damage

to the product and void the factory

warranty.

WARNING

PED5800 Series (A MD, MD, and AD)

Concealed Vertical Rod Exit Devices

part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

FM581 1/23

PED5800 Series (A MD, MD, AD)

Installation Instructions

Concealed Vertical Rod Exit Devices

part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

FM581 1/23

SCREW

TOTAL QTY

SUPPLIED

WHERE USED

#10-24 X 3/4" FLAT HEAD

MACHINE SCREW

(4) CHASSIS

CORNER MOUNTING HOLES

#10-24 X 3/4" ROUND HEAD

MACHINE SCREW

(2) REAR MOUNTING PLATE

#10-24 X 3/8" FILLISTER HEAD

MACHINE SCREW

(1) INNER CHASSIS

TOP MOUNTING HOLE

#10-24 X 3/8" OVAL HEAD

MACHINE SCREW

(2) TOP CASE

(2) BOTTOM PLATE (IF AD)

1/4"-20 X 1/2" FLAT HEAD

MACHINE SCREW

2(2) BOTTOM PLATE

(MD OR FIRE RATED)

#10-24 X 1/2" U'CUT FLAT HEAD

MACHINE SCREW

(1) INNER CHASSIS

BOTTOM MOUNTING HOLE

(2) 640 OR 650 STRIKE, TOP

(METAL FRAME)

(2) 640 OR 650 STRIKE, BOTTOM

(METAL FRAME)

#10 X 1-1/4 FLAT HEAD

WOOD SCREW

(2) 650 STRIKE, TOP

(WOOD FRAME)

(2) 650 STRIKE, BOTTOM

(WOOD FRAME)

1/4"-20 X 2" FLAT HEAD

MACHINE SCREW W/ANCHOR

(2) 606 BOTTOM STRIKE

(FIRE RATED)

#8-32 X 5/16" W/ #6 OVAL HEAD

MACHINE SCREW

(2) CHASSIS COVER

FRAME SIDE

(2) END CAP

#8-32 X 5/8" W/ #6 OVAL HEAD

MACHINE SCREW

2(2) CHASSIS COVER

RAIL SIDE

1/4"-20 X 2-3/8" KNURLED FLAT HEAD

MACHINE SCREW

(2) EXIT TRIM

(IF USED)

Screw Chart

PED5800 Series (A MD, MD, AD)

Installation Instructions

Concealed Vertical Rod Exit Devices

part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

FM581 1/23

Rail Cutting Guide (Provided)

Support Block (Provided)

Equipment Needed

Tools

Before installation:

1. Fit and hang door.

2. Check the box’s label for the size of the exit device.

The surface of the door where the exit device is to be applied must be flush. Clear away

any raised projections to allow exit device to rest on the flat surface of the door. If shim

kit is required, contact your distributor.

Note: Please refer to trim and other installation instructions provided in the box.

Strike Packs

Strike Pack for AD-PE8400

640 TOP AND BOTTOM STRIKE

#10 X 1/2"

PHILLIPS FLAT HEAD

MACHINE SCREW

(4 I N P A C K F O R T O P

AND BOTTOM S TRIKE )

Strike Pack for MD-PE8400 Strike Pack for 12-MD-PE8400

PED5800 MD

PED5800 AD PED5800 A M55

PED5800 Series (A MD, MD, AD)

Installation Instructions

Concealed Vertical Rod Exit Devices

part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

FM581 1/23

Template PE5800 AD, PE5800 AD M55, PED5800 MD, PED5800 MD M55,

PED5800 A MD, PED5800 A MD M55

Omit holes for M55 AD version and all MD versions.

.395

.300

.150

10-24 UNC - 2B

ONLY FOR RHRB

THRESHOLD IF USED

MUST LEAVE A MINIMUM

.350

ONLY FOR LHRB

ONLY FOR RHRB

.187

.811 2.388

AND DOUBLE DOORS)

CENTER LINE OF RAIL

ONLY FOR RHRB

FOR LHRB, SEE DETAIL A

NOTES:

DOOR PREPARATION SHOWN FOR INSIDE DOOR ONLY.

IF OUTSIDE PULL AND/OR OUTSIDE CONTROL IS USED, SEE APPROPRIATE DOOR TEMPLATE FOR OUTSIDE DOOR PREP.

WE RECOMENDED THAT ALL TAPPED HOLES BE DRILLED AND TAPPED IN FIELD.

TOLERANCE ALL FRACTIONAL DIMENSIONS

OPENING FOR

INSERTING DEVICE

OF RODS

MINIMUM CLEAR

OPENING FOR

INSERTING DEVICE

TOP OF DOOR

.811

.350

2.388

DETAIL A

SCALE 1 : 1

FEATURE FOR LHRB

For MD-bottom plate prep.

May be omitted for M55 MD

versions.

1/2

5/8

1/4-20 Tapped Holes (2 Places)

2-3/4

3/8

PED5800 Series (A MD, MD, AD)

Installation Instructions

Concealed Vertical Rod Exit Devices

part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

FM581 1/23

*Note: The PED5800 AD M55, PED5800 MD M55 & the PED5800 A MD M55 do not have a bottom rod assembly.

M52 Cylinder Lockdown

(Exploded View For Clarity)

Slide mounting rail insert with M52

cylinder dogging into mounting rail.

Exploded View

Rod silencer

End cap

INSIDE

LEFT HAND

REVERSE

BEVEL

RIGHT HAND

REVERSE

BEVEL

THIS EXIT DEVICE IS HANDED

CHECK HAND OF DEVICE AGAINST APPLICATION

OUTSIDE

Push rail assembly

Center case chassis

Chassis cover

Top Chassis

Top Bolt

Chassis

*Bottom rod assembly

Mounting Plate

PED5800 Series (A MD, MD, AD)

Installation Instructions

Concealed Vertical Rod Exit Devices

part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

FM581 1/23

Remove door from frame, and prepare the door per template.

PED5800 Series (A MD, MD, AD)

Installation Instructions

Concealed Vertical Rod Exit Devices

part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

FM581 1/23

Screw top bolt and rod assembly and bottom bolt

and rod assembly into the inner chassis.

*Bottom bolt rod and assembly will not be used with

M55 devices.

Top bolt and rod assembly

*Bottom bolt and rod assembly

PED5800 Series (A MD, MD, AD)

Installation Instructions

Concealed Vertical Rod Exit Devices

part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

FM581 1/23

Feed rod and inner chassis assembly into the door. Ensure teeth face down and top bolt teeth are opposite

the inside door prep.

Top bolt teeth

PED5800 Series (A MD, MD, AD)

Installation Instructions

Concealed Vertical Rod Exit Devices

part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

FM581 1/23

Attach inner case chassis to the door with (1) #10-24 x 1/2” flat head screw (HH) and secure with (1) #10-

24 x 3/8 fillister head machine screw (FF). If PT Series trim is being used, it must be installed at this point.

See trim instructions for details.

#10-24 x 3/8"

Fillister head screw

#10-24 x 1/2"

Flat head screw

Locate chassis on the fillister head screw (FF). Attach to the door with (4) #10-24 x 3/4 flat head screws (AA).

Do not fully tighten screws.

PED5800 Series (A MD, MD, AD)

Installation Instructions

Concealed Vertical Rod Exit Devices

part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

FM581 1/23

Adjusting the top bolt and rod assembly

• 1/8” gap or less between door top and frame: Rotate bolt to make it even with the top of the door.

• 1/8” gap or greater: Bolt must extend above the door, equal to the gap, minus 1/8”.

Adjusting the bottom bolt and rod assembly (Not needed for M55 exit devices)

• 1/8” gap or less between door bottom and high point: Rotate bolt to make it even with the top of the

door.

• 1/8” gap or greater: Bolt must extend below the door, equal to the gap, minus 1/8”.

Note: Rod must be retracted while adjusting bolt projection. Depress chassis lift arm to retract top bolt

and rod assembly.

Andere Handbücher für Corbin Russwin PED5800 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Assa Abloy Türöffnungssystem Handbücher

Assa Abloy

Assa Abloy SARGENT 3828 Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 281 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 5900 Series Kurzanleitung

Assa Abloy

Assa Abloy NORTON RIXSON 1600 Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 8800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SW200i Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin DC8210 Series Bedienungsanleitung

Assa Abloy

Assa Abloy 78PRA-8L Bedienungsanleitung

Assa Abloy

Assa Abloy SW100 Bedienungsanleitung

Assa Abloy

Assa Abloy h.e.s. 9100 Series Handbuch

Assa Abloy

Assa Abloy CMD Bedienungsanleitung

Assa Abloy

Assa Abloy SW100 Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 1130-HU Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin DC8200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton J1600 UniTrol Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT Powerglide 281 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5600 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5400 FE Bedienungsanleitung

Assa Abloy

Assa Abloy NORTON RIXSON 6300 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SL500 Bedienungsanleitung

Assa Abloy

Assa Abloy Adams Rite EX89 Betriebsanleitung

Assa Abloy

Assa Abloy Norton 1600 UniTrol Bedienungsanleitung

Assa Abloy

Assa Abloy DC 700G-FT BGS Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 6300 Series Kurzanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

TriMark

TriMark UM 34 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung

MPC

MPC ATD ACTUATOR 50 ATD-313186 Operating and Technisches Datenblatt

GEZE

GEZE ECturn Bedienungsanleitung

Chamberlain

Chamberlain T Bedienungsanleitung