Assa Abloy Corbin Russwin CL3500 Series Bedienungsanleitung

FM237 03/19

Installation Instructions

or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-607-5703 • techsupport.corbinrusswin@assaabloy.com

WARNING

This product can expose you to lead

which is known to the state of California

to cause cancer and birth defects or other

reproductive harm. For more information

go to www.P65warnings.ca.gov.

CL3500 Series

ANSI/BHMA Grade 1

Key-In-Lever

Cylindrical Lockset

CL3500 Series

Installation Instructions

Cylindrical Lockset

FM237 03/19

or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-607-5703 • techsupport.corbinrusswin@assaabloy.com

Attention Installer

Please read these instructions carefully to prevent missing important steps.

Notes

• Improper installation may result in damage to lock and void factory warranty.

• Other product brand names may be trademarks or registered trademarks of their respective owners

and are mentioned for reference only.

TOC Table of Contents

1 Standard Installation ............................................................3

a Install Latchbolt, Lockbody and Inside Trim ......................................3

2 Door and Frame Preparation ....................................................4

a Mark Door.......................................................................4

b Drill Door........................................................................4

c Install Strike .....................................................................4

3 Optional Installations............................................................5

a For CL3580 and CL3581 Function Only ...........................................5

4 Cylinder Installations ............................................................5

a Interchangeable Core Installation................................................5

b Interchangeable Core Removal ..................................................6

c Standard Cylinder Installation ...................................................7

d Conversion Kit...................................................................7

5 Lever Removal Installation.......................................................8

CL3500 Series

Installation Instructions

Cylindrical Lockset

FM237 03/19

or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-607-5703 • techsupport.corbinrusswin@assaabloy.com

1 Standard Installation

a Install Latchbolt, Lockbody and Inside Trim

Important

The accuracy of door preparation is critical for proper functioning and security of lever handle lock.

Misalignment can cause premature wear and lessening of security.

Figure 1 CL3500 Cylindrical Lockset — Standard Installation

AInstall Latchbolt 1 ►2

BInstall Lockbody 3

CInstall Inside Trim 4 ►5 ►6

TEST OPERATION:

Rotate levers to be sure

latchbolt moves freely.

DO NOT FORCE.

If lockset does not operate

properly, remove lockset from

door and check door preparation.

CL3500 Series

Installation Instructions

Cylindrical Lockset

FM237 03/19

or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-607-5703 • techsupport.corbinrusswin@assaabloy.com

2 Door and Frame Preparation

a Mark Door

Locate and mark horizontal center line at desired

height above floor. Fold template over edge of

door, centering on horizontal line. Mark centers

of holes at proper backset. Mark both sides of the

door.

Note

Be sure to verify backset before marking and

drilling door.

b Drill Door

1. 2-1/8" (54mm) hole through door. Cut ANSI

tab notches as shown on template (except

CL3550 and CL3570).

2. Drill 1" (25mm) hole in edge of door. Cut

out for latch front 5/32" (4mm) deep. 1-1/8"

(29mm) wide x 2-1/4" (57mm) high. Check

latch unit for proper width front and square or

round corners (except CL3550 and CL3570).

3. Drill two (2) 11/32" (8mm) diameter holes

through door for all functions.

Caution

To avoid splintering wood doors, drill holes from

both sides.

c Install Strike

Figure2 Mark Door

Door

Template

Figure3 Drill Door

Figure4 Install Strike

Attaching Screws

#12-24 x 1" #8-32 x 3/4"

Optional Strike

Box

Strikes

CL3500 Series

Installation Instructions

Cylindrical Lockset

FM237 03/19

or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-607-5703 • techsupport.corbinrusswin@assaabloy.com

3 Optional Installations

a For CL3580 and CL3581 Function Only

4 Cylinder Installations

a Interchangeable Core Installation

To install interchangeable core (with lever already installed on lock), see Figure6:

• Install tailpiece.

Figure5 Optional Installation

Cassette Assembly

#12-24

Machine

Screws

Blank

Plate

Figure6 Tailpiece Installation

** Verify that security disc is

installed for either 6 or 7

pin Corbin Russwin or small

format cores.

Tailpiece

Corbin Russwin

Core

Security Disc**

Spacer

(Used with 6-pin

Core only)

Small Format Core

6- or 7-Pin

Schlage

Core

Tailpiece with retaining

ring oriented for all Schlage

cores except Primus

Tailpiece with

retaining ring

oriented for Primus

CL3500 Series

Installation Instructions

Cylindrical Lockset

FM237 03/19

or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-607-5703 • techsupport.corbinrusswin@assaabloy.com

4 Cylinder Installations (cont.)

a Interchangeable Core Installation (cont.)

• Insert key marked CONTROL and turn clockwise

approximately 15°. See Figure7.

• Insert core into lever and return key to its

original horizontal position locking core in place.

See Figure8.

• Withdraw key. Test lockset for correct function

with operating key.

• Control key has no further use in lockset

installation and must be safeguarded for return

to security personnel when installation is complete.

b Interchangeable Core Removal

To remove interchangeable core:

• Insert key marked CONTROL and turn clockwise

approximately 15°. See Figure9.

• Pull core and tailpiece completely out of lever.

Figure7 Interchangeable Core Installation

Control Key

Core

Interchangeable Core

Lever Assembly

Control Key

Figure8 Locking Core

Figure9 Locking Core

Control Key

Core

Lever

CL3500 Series

Installation Instructions

Cylindrical Lockset

FM237 03/19

or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-607-5703 • techsupport.corbinrusswin@assaabloy.com

4 Cylinder Installations (cont.)

c Standard Cylinder Installation

• Before installing cylinders, be sure lock is

unlocked and cylinder tailpiece is aligned

in same direction as cylinder bible.

To install standard cylinder (Figure10):

• Slide cylinder all the way into lever.

• 6-pin cylinder: fold retainer at hinge

and press fit retainer halves together.

• 7-pin cylinder: break retainer at hinge

and discard spacer section. Remove

black cylinder spacer from inside of

chassis rollback for clearance.

d Conversion Kit

To convert Schlage®cylinders with

CL3500 lockset (Figure11):

• Remove threaded collar and Schlage®tailpiece.

• Install CL3500 tailpiece with threaded collar.

Adjust collar for proper end play of plug.

11/16"

(17 mm)

7/8"

(22 mm) 6 PIN 7 PIN

ACTUAL SIZE SHOWN

Figure10 Cylinder Installation

Lever

Retainer

Cylinder

Bible

Cylinder

Tailpiece

Fold Retainer Halves

Actual Size Shown

For 7-pin Cylinder

7-pin

6-pin

7/8"

(22 mm) 11/16"

(17 mm)

For 6-pin Cylinder

Hinge

Remove Spacer

and Discard

Figure11 Conversion Kit Installation

Schlage®Tailpiece Threaded

Collar

Schlage®

Cylinder

CL3500 Series

Installation Instructions

Cylindrical Lockset

FM237 03/19

or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-607-5703 • techsupport.corbinrusswin@assaabloy.com

5 Lever Removal Installation

Lever Style Removal Install

Push / Turn Button

Release Hole

Lever

Assembly

Button

Hold in button, push release

tool into release hole, remove

lever.

Push button in.

Slide lever on.

Make sure lever will not pull off.

Plain Lever Release Hole

Lever

Assembly

Push release tool into release

hole, remove lever.

Slide lever over lever catch.

Make sure lever will not pull off.

Cylinder Lever

Key

Release Hole

Lever

Assembly

Rotate key 45° clockwise

(from shed position). Push

release tool into release hole,

remove lever.

Lever

Key

Cylinder

Insert key and rotate 45°

(from shed position).

Slide lever on.

Make sure lever will not pull off.

Interchangeable Core Lever

Rose

Lever

Lever Catch

(Move in direction of arrow)

Remove core and tailpiece

(page6). Use flat blade

screwdriver to pull back lever

catch, remove lever.

Slide lever over lever catch.

Make sure lever will not pull off.

Corbin Russwin, Inc.

225 Episcopal Road

Berlin, CT 06037 USA

Phone: 800-543-3558

Fax: 800-447-6714

www.corbinrusswin.com

ASSA ABLOY is the global

leader in door opening solutions,

dedicated to satisfying

end-users needs for security, safety,

and convenience

Inhaltsverzeichnis

Andere Assa Abloy Sperren Handbücher

Assa Abloy

Assa Abloy Effeff 843G Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin IN120 Bedienungsanleitung

Assa Abloy

Assa Abloy LSC 001T-1K1CPDP Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent 8200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Real Living Assure Lock SL Series Technische Daten

Assa Abloy

Assa Abloy Corbin Russwin HPSK Bedienungsanleitung

Assa Abloy

Assa Abloy OneSystem 819N Installationsanleitung

Assa Abloy

Assa Abloy Securitron SAM Bedienungsanleitung

Assa Abloy

Assa Abloy Medeco XT Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent KP Series Installationshandbuch

Assa Abloy

Assa Abloy Lockwood Optimum Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 115 Hospital Latch Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent XC Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale nexTouch NTM 610 Montageanleitung

Assa Abloy

Assa Abloy 118F A71 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Securitron GL1 Bedienungsanleitung

Assa Abloy

Assa Abloy Code Handle Window Bedienungsanleitung

Assa Abloy

Assa Abloy 841C Bedienungsanleitung

Assa Abloy

Assa Abloy eCLIQ Bedienungsanleitung

Assa Abloy

Assa Abloy sFlipLock check 14471 Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent IN100 Bedienungsanleitung

Assa Abloy

Assa Abloy EL490 Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent Profile v.S1 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin FE6800 Series Bedienungsanleitung

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung