AT&T 957 Bedienungsanleitung

Telephone with

Caller ID 957

Please also read

Part 1 — Important

Product Information

USER’S MANUAL

Part 2

AT&T and the globe symbol are registered trademarks ofAT&T Corp.licensed toAdvancedAmericanTelephones.

957_book_2ATT ill at margins 11/16/00 1:39 PM Page i

Printed in China. 850003955 Issue 2AT&T 12/00

957_book_2ATT ill at margins 11/16/00 1:39 PM Page ii

CONTENTS

BEFORE YOU BEGIN

. . . . . . . . . 3

About Caller Identification

(Caller ID) . . . . . . . . . . . . . . . 3

About Call History . . . . . . . . . . . 3

About HomeArea Code and

LocalArea Codes . . . . . . . . . . 3

INSTALLATION

. . . . . . . . . . . . . 4

Table/Desk Installation . . . . . . . 4

Wall Installation . . . . . . . . . . . . 6

FEATURE SETTINGS

. . . . . . . . . 8

Language Selection . . . . . . . . . . 8

Set HomeArea Code . . . . . . . . . 8

Set LocalArea Codes . . . . . . . . . 9

Set Contrast . . . . . . . . . . . . . . . 9

SetTime/Date . . . . . . . . . . . . . . 9

Set Remaining Features . . . . . . 10

Feature Summary . . . . . . . . . . 10

TELEPHONE OPERATION

. . . . 12

Flash/CallWaiting . . . . . . . . . . 12

Mute . . . . . . . . . . . . . . . . . . . . 12

Hold . . . . . . . . . . . . . . . . . . . . 12

RingerVolume . . . . . . . . . . . . . 13

Redial . . . . . . . . . . . . . . . . . . . 13

Adjust Handset or

SpeakerVolume . . . . . . . . . . 13

Using the Speakerphone . . . . . 13

TemporaryTone Dialing . . . . . 13

TELEPHONE DIRECTORY

. . . . . 14

Storing Directory Numbers

& Names . . . . . . . . . . . . . . . 14

Storing a Pause or Flash in a

Directory Number . . . . . . . . 15

Storing Call History Numbers

in Directory . . . . . . . . . . . . . 15

Viewing Directory Numbers . . 15

Dialing Directory Numbers . . . 15

Deleting Directory Numbers . . 15

CALLER ID OPERATION

. . . . . 16

MessageWaiting and

NEW CALL Light . . . . . . . . . 16

Removing Call Records . . . . . . 16

Call Display . . . . . . . . . . . . . . . 17

Reviewing Call History . . . . . . 17

Display Dial . . . . . . . . . . . . . . . 17

Display Dial Options . . . . . . . . 17

Setting Display Screen Options . 18

Display Screen Messages . . . . . 18

IN CASE OF DIFFICULTY

. . . . . 19

957_book_2ATT ill at margins 11/16/00 1:39 PM Page 1

About Caller Identification (Caller ID)

This product has a Caller ID with CallWaiting feature that works with

service from your local phone service provider.

Caller ID with CallWaiting lets you see who’s calling before you answer the

phone,even when you’re on another call.

You may need to change your phone service to use this feature. Contact

your phone service provider if:

• You have both Caller ID and Call Waiting,but as separate services

(you may need combined service)

• You have only Caller ID service,or only CallWaiting service

• You don’t subscribe to any Caller ID or CallWaiting services.

You can use this product with regular Caller ID service,and you can use

this product’s other features without subscribing to either Caller ID or

combined Caller ID with CallWaiting service.

There are fees for Caller ID services,and they may not be available in all

areas.

This product can provide information only if both you and the caller are in

areas offering Caller ID service,and if both telephone companies use

compatible equipment.

About Call History

This phone assigns each incoming call a number from 1 to 99. The most

recent call will have the highest number. When the memory is full,the

oldest call information is deleted to make room for new incoming call

information.

If you answer a call before call information appears on the screen,it will

not be in the call history.

About Home Area Code and Local Area Codes

Always program your home area code,and,if you need them,up to four

local area codes (see“Set HomeArea Code”and“Set LocalArea Codes”on

pages 8 and 9). Programming these area codes will change how numbers

are displayed in the call history,and will allow for correct operation of the

Display Dial feature.

BEFORE YOU BEGIN

957_book_2ATT ill at margins 11/16/00 1:39 PM Page 3

Table/Desk Installation

1(Optional) You can adjust how much the phone tilts by pushing

outward with your thumbs on the recessed“feet.” Push the feet

out from the inside of the base,until they snap into place. If a foot

comes out,align the arrow on the foot with the arrow on the base,

and squeeze the foot back in from the inside of the base.

4 Connect the line cord to the telephone.

5 Thread the power cord through the strain-relief tab,

then plug it into the jack labeled POWER.

(Make sure the plug is vertically oriented.)

Use only the power cord supplied with this product.

If you need a replacement,call 1 800 222-3111.

INSTALLATION

3 Attach the base to the

telephone.

Turn the base so that the

smaller end is toward the

bottom of the telephone,

then attach.

2Set the dial mode.

This phone comes set for

touch tone dialing (TT). If

you have dial pulse (rotary)

service,set the swich on the

underside of the phone to DP.

957_book_2ATT ill at margins 11/16/00 1:39 PM Page 4

INSTALLATION

6 Connect the line cord to a modular jack.

7 Connect the power cord to a standard electrical outlet

not controlled by a wall switch.

NOTE: When you first plug in the power cord, the screen

displays WHICH LANGUAGE?. Follow the programming steps on

page 8 after installation is complete.

8 Connect the handset to the telephone.

Plug the coiled cord into the handset jack on the side of the

phone. Plug the other end of the coiled cord into the handset,

then hang up.

9Check for dial tone.

Lift the handset and listen for a dial tone. If you cannot hear

a dial tone,pressVOLUME +. If you still do not hear a dial tone,see

the IN CASE OF DIFFICULTY section of this manual.

Your phone will work immediately after installation using the default

feature settings (see“Feature Summary”on page 10).

NOTE: If you subscribe to Caller ID services from your local telephone

service provider, you must follow the instructions in“Set Home Area

Code”for your phone to properly recognize and dial calls (see page 8) .

You may also need to“Set Local Area Codes”(see page 9).

Modular

telephone

wall jack

Standard

electrical

outlet

Power cord

Strain-relief

tab

Telephone

line cord

957_book_2ATT ill at margins 11/16/00 1:39 PM Page 5

Wall Installation

1Set the dial mode.

This phone comes set for tone dialing. If you have pulse dialing

service,you cannot dial numbers with the phone set to tone. Set

the switch on the underside of the base to TT (touch tone) or DP

(dial pulse/rotary),depending on your service.

2Connect the line cord to the telephone

Plug the short line cord into the jack labeled TEL LINE,then

thread it through the channel on the bottom of the set.

3Attach the base to the telephone.

Make sure the pull-out feet are not extended. Turn the base so that

the larger end is toward the bottom of the telephone. Attach the

base by inserting the tabs into the slots. Push down on the large

end of the base so the tabs are in the slots,and the base locks in

place. Pull the loose end of the line cord through the rectangular

opening on the bottom of the base.

INSTALLATION

3a 3b

Slot Slot

957_book_2ATT ill at margins 11/16/00 1:39 PM Page 6

4Reverse the handset tab.

This tab holds the handset when you hang up. Hold down the

switchhook,and slide the tab up and out of its slot. Turn the tab

so that the end with the“hook”is up. Then insert the tab back

into its slot.

5Plug the power cord into the jack labeled POWER.

(Make sure the plug is vertically oriented.)

Use only the power cord supplied with this product.

If you need a replacement,call 1 800 222-3111.

6Connect the line cord to a modular wall jack and mount

the phone on the wall jack.

Make sure the cord snaps firmly into place. Place the phone on

the wall jack mounting studs and pull down until it is held securely.

Switchhook

Handset tab

INSTALLATION

7Follow Steps 7–9 in “Table/Desk Installation.”

Mounting

studs

957_book_2ATT ill at margins 11/16/00 1:39 PM Page 7

FEATURE SETTINGS

NOTE: You can exit feature setup at any time by holding Nfor

about two seconds, or by lifting the handset when there is no

incoming call. The order features appear in the menu changes after

initial setup. For complete feature setup, see pages 10 and 11.

Language Selection

You can select ENGLISH or ESPANOL (Spanish) as the language in which

your Caller ID information is displayed. When you first plug in the power

cord,the screen displays:

1Press CALL LIST +until the screen displays your language

selection.

2Press N. You will see the HomeArea Code setup screen.

Set Home Area Code

You must program your area code,so your phone can properly recognize

and dial calls.

If for calls within You dial Enter in Step 2

your area code 7 digits Your home area code

(phone number, no area code)

10 digits 000

(area code + phone number)

— OR —

11 digits

(1+ area code + phone number)

1Press Nuntil the screen displays:

2Use the keypad to enter the three digits of your home area code.

3Press N.

HAC-___

HOME AREA CODE?

WHICH LANGUAGE?

957_book_2ATT ill at margins 11/16/00 1:39 PM Page 8

Set Local Area Codes

You can program up to four local area codes.

If for You dial Enter in Step 2

All calls outside 11 digits No local area codes

your area code (1+ area code + phone number)

Some calls outside 10 digits Area codes that do

your area code (area code + phone number) not require a “1”

If you dial 10 digits (area code plus phone number) for calls within your own area

code, include your area code as a local area code.

1Press and release Ountil the screen displays:

2Use the keypad to enter the three digits of the first local area code.

The screen prompts you for the next local area code (LAC2–,

LAC3–,LAC4–).

3Press Owhen you are finished.

Set Contrast

Adjust screen lighting to a comfortable level,from 1 (light) to 4 (dark).

1Press and release Nuntil the screen displays SET CONTRAST.

2Press CALL LIST +or CALL LIST -until the screen displays the

contrast level you prefer.

3Press N.

Set Time/Date

NOTE: The time/date are automatically reset each time new call

information is received. Incorrect time/date will be corrected with next

incoming call.

1Press and release O. The screen displays ENTER TIME?.

2Use the numbers on the keypad to enter the time. Press +to

select AM;press -to select PM (the screen may not display PM

until you have finished setting the time).

3Use the numbers on the keypad to enter the date. For example,

press 0605 to enter June 5. (Zeroes are not displayed.)

4Press Oto move to the next feature

— OR —

Wait 30 seconds for the phone to return to standby.

LAC1-___

LOCL AREA CODE?

FEATURE SETTINGS

957_book_2ATT ill at margins 11/16/00 1:39 PM Page 9

Inhaltsverzeichnis

Andere AT&T Telefon Handbücher

AT&T

AT&T Synapse SB67020 Bedienungsanleitung

AT&T

AT&T 1856 - Corded Speakerphone Bedienungsanleitung

AT&T

AT&T E5811 Bedienungsanleitung

AT&T

AT&T CareLine SN1197 Bedienungsanleitung

AT&T

AT&T TL90031 Bedienungsanleitung

AT&T

AT&T Partner MLS 12D Bedienungsanleitung

AT&T

AT&T 2833 Series Leitfaden

AT&T

AT&T TRIMLINE 210 Bedienungsanleitung

AT&T

AT&T System 75 Bedienungsanleitung

AT&T

AT&T Definity 7410 Bedienungsanleitung

AT&T

AT&T Four-Line Intercom Speakerphone 974 Bedienungsanleitung

AT&T

AT&T 945 Bedienungsanleitung

AT&T

AT&T 1040 Bedienungsanleitung

AT&T

AT&T 924 Bedienungsanleitung

AT&T

AT&T 1856 - Corded Speakerphone Bedienungsanleitung

AT&T

AT&T 1080 Bedienungsanleitung

AT&T

AT&T Generic 1 Bedienungsanleitung

AT&T

AT&T CL82115 Bedienungsanleitung

AT&T

AT&T CL4939 Bedienungsanleitung

AT&T

AT&T 1527 Bedienungsanleitung

AT&T

AT&T SynJ SB67118 Bedienungsanleitung

AT&T

AT&T U-verse TV Bedienungsanleitung

AT&T

AT&T BELL 2563HB Bedienungsanleitung

AT&T

AT&T SB3014 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung

Axess Telecom

Axess Telecom ACW-1xP800 Bedienungsanleitung