ATCOM AT800 Series Bedienungsanleitung
AT800
AT800
AT800
AT800 Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
AT800
AT800
AT800
AT800 Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
Version 1.0
20 1 3 - 01-15
AT800
AT800
AT800
AT800 Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
Catalog
Catalog
Catalog
Catalog
1、Installation and access
.........................................................................................................
3
1.1 Power on
........................................................................................................................
3
1.2 Connect to network
........................................................................................................
3
2、Configure AT800 to make VoIP calls
....................................................................................
4
2.1 LAN Config
......................................................................................................................
4
2.2 SIP Config
........................................................................................................................
5
3、Login indicator
......................................................................................................................
7
AT800
AT800
AT800
AT800 Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
1
1
1
1、Installation
Installation
Installation
Installation and
and
and
and access
access
access
access
Installation:
Using AT800 as below scene:
Internet
PC
Switch
SIP Server
AT
800
AT
800
AT
800
1.1
1.1
1.1
1.1 Power
Power
Power
Power on
on
on
on
1. Plug in network cable at LAN port.
2. Plug in the power jack with DC 12V/ 500m A.
3. All Leds will be lighted once and then turn off.
4. After a absolute boot up, login led will be lighted in red and AT800 comes
into stand by mode.
1.2
1.2
1.2
1.2 Connect
Connect
Connect
Connect to
to
to
to network
network
network
network
1. Connect your PC to PC port using DHCP mode.
2. Your PC should obtain an IP address in default net settings, mostly like
192.168.10.20.
AT800
AT800
AT800
AT800 Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
3. Inputting http://192.168.10.1 in your browser and press enter key to
access webpage of AT800 in user level.
4. Y ou can click “ admin ” button at the right side of webpage(under the logo)
to change to admin level .
2
2
2
2、Configure
Configure
Configure
Configure AT800
AT800
AT800
AT800 to
to
to
to make
make
make
make VoIP
VoIP
VoIP
VoIP calls
calls
calls
calls
2.1
2.1
2.1
2.1 LAN
LAN
LAN
LAN Config
Config
Config
Config
E nter
Network
Network
Network
Network �
�
�
�LAN
LAN
LAN
LAN Port
Port
Port
Port
to set the L AN setting :
AT800 supports three different IP types: Static IP, Dynamic obtain IP (DHCP)
and PPPoE. Y ou can use either of these IP types to connect the internet.
Use
Use
Use
Use DHCP:
DHCP:
DHCP:
DHCP:
---- Select DHCP
If you have a DHCP server in your network , AT800 will automatically obtain
the network information from your DHCP server.
AT800
AT800
AT800
AT800 Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
Use
Use
Use
Use Static
Static
Static
Static IP:
IP:
IP:
IP:
---- Select “ S tatic ” ;
---- Enter the AT800 ’ s IP address in the “ IP address ” field.
---- Set the “ Subnet Mask ” , default 255.255.255.0
---- Enter the AT800 ’ s upper gateway IP address ( for example: Router ) in
the “ Default Gateway ” field
---- Key in the DNS information in the “ Primary DNS ” and “ Secondary DNS ”
fields.
Use
Use
Use
Use PPPoE:
PPPoE:
PPPoE:
PPPoE:
---- Select PPPoE
---- Type your PPPoE dialup information in the PPPoE setting fields: PPPoE
server ( option), Username and password.
T hen connect AT800 to the Ethernet port of the modem, it will connect to the
internet through PPPoE, and automatically obtain the IP address, Subnet
M ask , Default Gateway, Primary DNS and Secondary DNS information.
Click <Submit> button on webpage to save the change and make a auto
reboot.
2.2
2.2
2.2
2.2 SIP
SIP
SIP
SIP Config
Config
Config
Config
2.2.1
2.2.1
2.2.1
2.2.1 SIP
SIP
SIP
SIP server
server
server
server config
config
config
config
E nter
Account
Account
Account
Account �
�
�
�Account
Account
Account
Account
setting page and set the sip information
AT800
AT800
AT800
AT800 Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
----
---
---
--- Enable:
Enable:
Enable:
Enable: choose yes ;
---
User
User
User
User ID:
ID:
ID:
ID:
sip account number;
---
Password:
Password:
Password:
Password:
sip password;
----
----
----
---- SIP
SIP
SIP
SIP Server
Server
Server
Server :sip server address;
----
----
----
---- SIP
SIP
SIP
SIP Port
Port
Port
Port :sip se rver register port;
Click <Submit> button on webpage and it will display <please wait,
restating … > on LCD.
Outbound proxy server, Register Expires, SIP 100Rel Enable, Transport Type are optional
parameters set as you need. If there is no particular requirement on these
parameters, please leave them as default settings.
2.2.2
2.2.2
2.2.2
2.2.2 Manual
Manual
Manual
Manual Login
Login
Login
Login SIP
SIP
SIP
SIP account
account
account
account
1. If [Remember account] is set to no, user needs a manual login on LCD
every time the phone restarts.
2. After the restart, it will enter idle stat e and login led will be lighted in red.
AT800
AT800
AT800
AT800 Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
2. Press <Login> button, input phone number a nd password as:
*number*password#. For example, if your number is 1234, password is
5678, then input *1234*5678# after pressing login key.
3. When registration is successful, l ogin indicator will turn off .
4. If registration is failed, login indicator will still be lighted in red. Please
check you sip server settings on webpage and press login key to input
*number*password# again to start registration.
3
3
3
3、Login
Login
Login
Login indicator
indicator
indicator
indicator
Login
Login
Login
Login indicator
indicator
indicator
indicator AT800
AT800
AT800
AT800 status
status
status
status
Red/flashing LAN d isconnected
Red/stable SIP unregister
O ff SIP register ok
T hen you can make calls when the L AN and SIP config are both correct.
AT800 just supports headset calls.
Andere Handbücher für AT800 Series
6
Inhaltsverzeichnis
Andere ATCOM IP-Telefon Handbücher
ATCOM
ATCOM AT800 Series Bedienungsanleitung
ATCOM
ATCOM AT820 series Betriebsanleitung
ATCOM
ATCOM Rainbow1 Bedienungsanleitung
ATCOM
ATCOM Rainbow1 Bedienungsanleitung
ATCOM
ATCOM AT530P Bedienungsanleitung
ATCOM
ATCOM AT530P Bedienungsanleitung
ATCOM
ATCOM AT-610P Bedienungsanleitung
ATCOM
ATCOM AT810P Betriebsanleitung
ATCOM
ATCOM AT800 Series Bedienungsanleitung
ATCOM
ATCOM D2SV-LW Bedienungsanleitung
ATCOM
ATCOM AT-640 Bedienungsanleitung
ATCOM
ATCOM D2SV Bedienungsanleitung
ATCOM
ATCOM AT-610 Bedienungsanleitung
ATCOM
ATCOM AT800 Series Bedienungsanleitung
ATCOM
ATCOM AT530 Bedienungsanleitung
ATCOM
ATCOM AT-610P Bedienungsanleitung
ATCOM
ATCOM AT-610 Bedienungsanleitung
ATCOM
ATCOM Rainbow4 Bedienungsanleitung
ATCOM
ATCOM AT840P Betriebsanleitung
ATCOM
ATCOM AT800 Series Bedienungsanleitung
