ATD Tools ATD-7435A Bedienungsanleitung

ATD-7435A

1/2-Ton Heavy-Duty Hydraulic Floor Style Transmission Jack

Owner’s Manual

Features: Specifications:

6-15/16"

28-5/16"

17-15/16"

13-3/8" 7-7/8"

13 916 15

33-5/8" 19-3/4" 7-1/2"

140.80

ATD7435A_rev_1120Made in China to ATD Tools, Inc. Specifications

Visit us at www.atdtools.com

1,100 lbs.

BEFORE USE

SAVE THESE INSTRUCTIONS

r e e r r r e

r e

Inspect before each use.

PRODUCT DESCRIPTION:

ATDT ve

SAFETY INSTRUCTIONS:

10 e

v e re r

r r

!WARNING

CAUTION!

Figure 1 - Model ATD-7435A components

O F

ASSEMBLY:

OPERATION:

T e

!WARNING

MAINTENANCE:

Lowering

Check and Refill Oil

Lubrication and Cleaning

Air Venting Procedures

Lifting

Damaged Equipment

SHOULD BE REMOVED

FROM SERVICE UNTIL REPAIRED

Symptom Possible Causes Solu on

1. Release valve not ghtly closed.

1. Tighten release valve knob.

2. Low oil level.

2. Check and add oil. Follow “Check and ReĮll Oil”

instruc ons on Pg.3.

3. Defec ve or worn internal parts.

3. Discon nue use and contact a local repair center.

4. Load exceeds maximum

allowance.

4. Use a higher capacity jack.

1. Release valve not ghtly closed.

1. Tighten release valve knob.

2. Power unit malfunc on.

2. Discon nue use and contact a local repair center.

1. Air trapped in system.

1. Vent air out of system. Fol l ow “Air Ven ng Procedures”

on Pg.3.

2. Reservoir oil overĮlled.

2. Check and ensure proper oil level. Follow “Check and

ReĮll Oil” instruc on on Pg.3.

Check and ens ure proper oi l l evel .

Follow “Check and ReĮll Oil” instruc ons on Pg.3.

Jack will not func on properly a er tried

solu on.

Internal malfunc on or structural

damage.

Stop usage and contact an authorized repair

center.

Jack will not li the load.

Jack will not hold the load.

Jack will not descend to minimum height,

or will not remain in lowered posi on.

Jack will not li to max height.

Low oil level.

TROUBLESHOOTING

Alterations

Attachments and Adapters

Storage

Inspection

MAINTENANCE CONTINUED:

*Items not iden ed by part number are not available for replacement.

Replacement Parts for model ATD-7435A:

REPLACEMENT PARTS

D7435A

Item Part Number Description Q'ty

1 7435A-1 Power Unit Assembly 1

2 7435A-2 Rear Caster Assembly 4

3-3-A5347A5347

33 ylbmessAylbmessA eldnaHeldnaH 11

4 7435A-4 Chain 2

5 7435A-5 Saddle Bracket Assembly 2

6 7435A-6 Oil Filler Screw w/ Seal 1

N/A 7435A-L Label 1

WARRANTY

1 YEAR LIMITED WARRANTY

THIS WARRANTY AND CONFIRMED RECEIPT(S) SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES

PURCHASED FROM: _______________________________________

DATE PURCHASED: ________________________________________

INVOICE/RECEIPT NUMBER: _________________________________________

Your ATD-7435A is warranted for a period of 12 months from the original purchase date.

For a period of one (1) year from your purchase date, ATD Tools, Inc. will repair or replace (at its option) without charge, your

ATD product if it was purchased new and the product has failed due to a defect in material or workmanship which you experienced

during normal use of the product. This limited warranty is your exclusive remedy.

To access the benefits of this warranty, contact your supplier, or point of sale directly. You may be advised to return the product

under warranty, freight prepaid, to your supplier for warranty determination.

If this ATD product is altered, abused, misused, modified, or undergoes service by an unauthorized technician, your warranty will

be void. We are not responsible for damage to ornamental designs you place on this ATD product and such ornamentation should

not cover any warnings or instructions or they may void the warranty. This warranty does not cover scratches, superficial dents, and

other abrasions to the paint finish that occur under normal use. It also does not cover normal wear items such as but not limited to

brushes, batteries, drill bits, drill chucks, pads or blades.

Subject to the law in your state:

(1) Your sole and exclusive remedy is repair or replacement of the defective product as described above.

(2) ATD is not liable for any incidental damages, including but not limited to, lost profits and unforeseeable consequences.

(3) The repair and replacement of this product under the express limited warranty described above is your exclusive remedy and is

provided in lieu of all other warranties, express or implied. All other warranties, including implied warranties and warranties of

merchantability or fitness for a particular purpose are disclaimed and, if disclaimer is prohibited, these warranties are limited to

one year from your date of purchase of this product.

Some states’ laws do not allow limited durations on certain implied warranties and some states’ laws do not allow limitations on

incidental or consequential damages. You should consult the law in your state to determine how your rights may vary.

[Affix receipt or invoice here for safe keeping]

Inhaltsverzeichnis

Andere ATD Tools Jack Handbücher

ATD Tools

ATD Tools ATD-7406 Gebrauchsanweisung

ATD Tools

ATD Tools ATD-7383W Bedienungsanleitung

ATD Tools

ATD Tools ATD-7382W Bedienungsanleitung

ATD Tools

ATD Tools ATD-7227B Bedienungsanleitung

ATD Tools

ATD Tools 7345B Bedienungsanleitung

ATD Tools

ATD Tools ATD-7343A Bedienungsanleitung

ATD Tools

ATD Tools ATD-7465 Bedienungsanleitung

ATD Tools

ATD Tools ATD-7404 Bedienungsanleitung

ATD Tools

ATD Tools ATD-7332A Gebrauchsanweisung

ATD Tools

ATD Tools ATD-7328 Gebrauchsanweisung

ATD Tools

ATD Tools ATD-7500 Gebrauchsanweisung

ATD Tools

ATD Tools ATD-2025 Bedienungsanleitung

ATD Tools

ATD Tools ATD-7431A Bedienungsanleitung

ATD Tools

ATD Tools 7392 Gebrauchsanweisung

ATD Tools

ATD Tools ATD-7367W Bedienungsanleitung

ATD Tools

ATD Tools ATD-7385W Bedienungsanleitung

ATD Tools

ATD Tools ATD-7381W Bedienungsanleitung

ATD Tools

ATD Tools ATD-7333B Bedienungsanleitung

ATD Tools

ATD Tools MagicLift ATD7325 Gebrauchsanweisung

ATD Tools

ATD Tools ATD-7328 Bedienungsanleitung

ATD Tools

ATD Tools Atd-7430 Gebrauchsanweisung

ATD Tools

ATD Tools 7404 Bedienungsanleitung

ATD Tools

ATD Tools ATD-7461 Bedienungsanleitung

ATD Tools

ATD Tools ATD-7384W Bedienungsanleitung

Beliebte Jack Handbücher anderer Marken

Omega Lift Equipment

Omega Lift Equipment 18122C Gebrauchsanweisung

Pittsburgh

Pittsburgh 58816 Montageanleitung

Unimec

Unimec TP Bedienungsanleitung

Sonic

Sonic 4800703 Bedienungsanleitung

BGS technic

BGS technic 70039 Bedienungsanleitung

TradeQuip

TradeQuip 1128T Bedienungsanleitung

VEVOR

VEVOR TJD-12000SP-F Bedienungsanleitung

ULTIMATE SPEED

ULTIMATE SPEED URW 2 A1 HYDRAULIC TROLLEY JACK Bedienungsanleitung

Stels

Stels 51131 Bedienungsanleitung

Bushranger

Bushranger RJX01 Bedienungsanleitung

Clarke

Clarke CTJ2500QLG Installations- und Betriebshandbuch

Valex

Valex 1650520 Bedienungsanleitung

Pfaff

Pfaff Merkur M0 Bedienungsanleitung

Beta

Beta 3050/K Beilage

Sealey

Sealey 1050CXHV Bedienungsanleitung

Jung

Jung JH Series Bedienungsanleitung

URIAH

URIAH UC200020 Bedienungsanleitung

Kennedy

Kennedy KSJ010 Bedienungsanleitung