Atdec A-STSWW-A Bedienungsanleitung

A-STSWW-A Page 1 of 5

Installation Instructions

Wall Mounted

Sit-to-Stand Workstation - Antimicrobial

Component Checklist

Step 1. Check Components

ABC D E

Lower Arm Upper Arm Vertical Screen

Slider Keyboard Tray Tilt Head

A-STSWW-A

• 8mm wrench

• Drill

• 10mm masonry bit

• 4.5mm drill bit

• Ratchet

• Spirit Level

• Stud Finder

• Pencil

5mm Allen 6mm Allen2.5mm Allen

M6X8 (x1) M4x10 (x4)M6X12 (x4)M8X20 (x1)

8mm

¼” Drive

Velcro

Strip (x2)

H J K L M N

PO Q R S T

Tools Required

Plastic

Washer (x1)

Coach

Screw (x6) Nylon

Anchor (x6)

Metal

Washer (x1)

M6X10 (x3)

Hardware

Wall Mounting Hardware

Check that you have received all parts against the Component Checklist.

! IMPORTANT - Install as per Installation Instructions

! The manufacturer accepts no responsibility for incorrect installation.

! This product supports a maximum load 8Kg (17.6lbs.)

! The wall mount can be installed on vertical, at, solid concrete or brick walls, or timber stud walls only.

! Thewallshouldbestrongenoughtosustainaweightofatleastfourtimesthatofthedisplayandwallmountbracketcombined.

If in doubt, consult a structural engineer.

! Checkwallanchorsandscrewsevery3monthsfromthetimeofinstallationtoensuretheworkstationisrmlyxedtothewall.

! Tighten all screws (do not exert excessive force to avoid breaking the screws or damaging their thread)

IMPORTANT INFORMATION

A-STSWW-A Page 2 of 5

2.3

2.4

2.5

Wall Plate

Remove top and

bottom covers from

the wall plate.

Push nylon

anchors into

each hole.

Fix wall plate to

the wall using 6

coach screws

10mm

55mm

Wall 2.1

2.2

Spirit

Level

2.3

2.4

Wall Plate

Remove top and

bottom covers from

the wall plate.

Fix wall plate to

the wall using 4

coach screws

4.5mm

55mm

Stud

2.2

2.1

Spirit

Level

Step 2. Option B - Stud wall installation

Tip: Screw in the top coach screw rst.

Usethesuppliedtemplate

to mark and drill 4 holes

into the wall.

Two people

required

Note: Use a stud nder to ensure

all holes are drilled into the stud.

Step 2. Option A - Masonry or cement wall installation

Tip: Screw in the top coach screw rst.

Usethesuppliedtemplate

to mark and drill 6 holes

into the wall.

Two people

required

Note: For optimum performance, use a spirit

level to ensure straight installation.

A-STSWW-A Page 3 of 5

5.1 Drop screw head into

keyhole slot in upper

arm plate.

5.2

Screw limits screen

rotation to 90°

Remove screw for

360° rotation

90°360°

5mm

Note: do not tighten screw ‘Q’

4.1 4.2

Step 4. Assemble slider to keyboard trayStep 3. Assemble upper arm

Step 5. Assemble slider to keyboard tray

Step 6. Attach tilting head to screen Step 7. Attach screen to arm Step 8. Replace covers

A-STSWW-A Page 4 of 5

Screen Height Tension

Tension Adjustment Points

Screen Tilt Tension

+35°

-5°

90°

+65°

-30°

Keyboard Tray Storage

Mouse Tray PositionArm Height Tension

Arm Rotation Joint Tension

Adjusting

Note: Arm must be

in highest position

to access tension

adjustment point.

Note: Supplied velcro strips secure

the keyboard when stowed.

The keyboard tray can be

folded away for storage.

Themousetraycanbepositioned on

the left or right of the keyboard tray.

A-STSWW-A Page 5 of 5

Wash parts in

warm soapy

water.

Push in tab to

remove mouse

tray.

• Detach lower arm cable

cover by removing 6 screws.

• Route cables through the

cavity in the arm, then

reattach the cover.

Note: Ensure there is sucient slack in the cables to

accommodate the workstation’s range of movement.

The upper arm cable

cover is detached by

pulling near the top of

the cover.

No portion of this document or any artwork contained herein should be reproduced in any way without

the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer

atdec.com

Cable Management. Route cables through arm.

Secure Keyboard Attach velcro to keyboard and tray Cleaning

Wrist pad and mouse tray can

be removed for cleaning.

Stud Wall

Drilling Template

Only drill holes marked with an ‘X’

Masonry Wall

Drilling Template

Only drill holes marked with an ‘X’

Inhaltsverzeichnis

Andere Atdec Rack & Stand Handbücher

Atdec

Atdec AD-AC-PH Bedienungsanleitung

Atdec

Atdec VF-AT-NP Bedienungsanleitung

Atdec

Atdec Visidec Focus Micro Bedienungsanleitung

Atdec

Atdec APA-B Bedienungsanleitung

Atdec

Atdec AF-AT Bedienungsanleitung

Atdec

Atdec AD-TVC-70R Bedienungsanleitung

Atdec

Atdec AWM-W6 Bedienungsanleitung

Atdec

Atdec VFS-DV Bedienungsanleitung

Atdec

Atdec Focus VF-AT-NP Bedienungsanleitung

Atdec

Atdec AWMS-2-4640-C Bedienungsanleitung

Atdec

Atdec AWM 710 Arm Bedienungsanleitung

Atdec

Atdec AWM-FC Bedienungsanleitung

Atdec

Atdec Spacedec Acrobat Swing Arm Double Bedienungsanleitung

Atdec

Atdec AWMS-BT40 Bedienungsanleitung

Atdec

Atdec AWMS-DW6 Bedienungsanleitung

Atdec

Atdec AWM-X40 Bedienungsanleitung

Atdec

Atdec AF-MC Bedienungsanleitung

Atdec

Atdec AWM-BT Bedienungsanleitung

Atdec

Atdec AWMS-2-BT75-FS Bedienungsanleitung

Atdec

Atdec AWM-W35 Bedienungsanleitung

Atdec

Atdec VISIDEC FOCUS ARTICULATED ARM DOUBLE Betriebsanleitung

Atdec

Atdec AWM-BT Bedienungsanleitung

Atdec

Atdec ADBS-2x2-17MFB Bedienungsanleitung

Atdec

Atdec AWM-A13-B Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung