Atdec AF-MC Bedienungsanleitung

AF-MC Page 1 of 4

COMPONENT CHECKLIST

Security

Screw

M4 x 16mm

(x1)

Pole

Cap

(x1)

Pressure

Plate

(x1)

Desk Clamp

(x1)

Mounting

Screws

M4x10mm

(x4)

Cable

Clip

(x1)

2mm

Allen Key

(x1)

5mm

Allen Key

(x1)

Cable

Stop

(x2)

Mounting

Screws

M4x12mm

(x4)

Mounting

Screws

M4x16mm

(x4)

Screw

M8x30mm

(x1)

Bolt Through

Plate

(x1)

Screw

M8x60mm

(x1)

Steel

Washer

(x1)

Pole

Assembly

(x1)

VESA

head

(x1)

Installation Guide

AF-MC

Micro Desktop Monitor Mount - C Clamp

IMPORTANT INFORMATION

! Please ensure this product is installed as per these installation instructions.

! The manufacturer accepts no responsibility for incorrect installation.

REQUIRED TOOLS

WEIGHT RANGE

• Power Drill

• Drill Bit

• Phillips Head Screwdriver

0 - 8kg

(0 - 17.6lbs)

AF-MC Page 2 of 4

4. Bolt through - Drill Hole

9mm

(3/8”)

25mm

offset

5. Bolt Pole to work surface

Note orientation of

plate with pole

5mm

Allen Key

M8x60mm

Screw

Bolt

Through

Plate

Steel

Washer

1. Desk overview

M8 x 30mm

screw Tighten

rmly

Place pressure

plate on end of

clamp screw

2.2 Place in desired location 2.3 Screw pressure plates in and tighten rmly.

2.1 Attach clamp to post

2. Post mount configuration

6. Install VESA monitor head

VESA monitor

head

Screen

M4x10/12/16mm

Phillips Head Mounting

Screws

6.1 Install VESA monitor head as shown. 100mm

75mm

100mm 75mm

Pressure Plate

Clamp Screw

Allen Key

4.1 Drill 9mm hole in

desired post position

on work surface.

Bolt Through

Desk Clamp

3.2mm

52mm

(2.1”)

(0.1”)

Desktop

MIN THICKNESS - 10mm (3/8”) MAX THICKNESS - 34mm (1,1/4”) THICKNESS RANGE

12mm-40mm (0.5”-1.5”)

AF-MC Page 3 of 4

8. Unlock/Lock Arm Rotation (Note: Focus Micro comes assembled in the “Locked” Position.)

Pole

2mm Allen Key

Grub ScrewMicro Arm

2mm Allen Key

Grub Screw

Grub Screw Hole

Slot in Pole

Unlock

If you wish your Focus Micro Arm to have 360º rotation

about the Pole you will need to unlock the arm’s rotation

Step 1: Unlock the arm by turning the Grub Screw

anti-clockwise removing the Grub Screw completely

Note: Store the Grub Screw in a safe place if you are to

return the arm to the Locked position

Lock

If you have unlocked your Focus Micro Arm, but wish to

x rotation around the Pole, you will need to lock the arm

Step 1: Ensure the hole for the Grub Screw in the Micro

Arm is lined up with the centre of the Slot in the Pole

Step 2: Re-insert the Grub Screw

previously removed. Turn the Grub

Screw clockwise until it is tight.

Do not over-tighten

7. Mounting Monitor

VESA monitor head

Arm Assembly

7.2 OPTIONAL SECURITY SCREW

Ensure the Monitor is supported, then loosen the Monitor head

screw with the 5mm Allen Key and tilt screen up before installing

the M4 x 16mm Security Screw into the Security Screw hole

Note: Support Screen

when adjusting tilt.

7.1 Insert VESA monitor head into the

receptacle in the Arm Assembly

5mm Allen Key

Phillips Head

Screwdriver

Loosen

Tighten

Security Screw

Hole

M4 x 16mm

Security Screw

Monitor head

screw

9.1 Unlock ensuring both screen and arm

assembly are supported

9.2 Lift/Lower Screen to the desired

height. Move both Screen and Arm

assembly together.

9.3 Lock Handgrip rmly.

9. Adjusting Height

AF-MC Page 4 of 4

Note: If Focus Micro

is to be used in a multi

user environment, use

the supplied Cable Clip

to secure the display’s

cables to the Pole.

Cable Stop

Cable Clip

Note: Ensure enough

cable slack is given to

allow for movement.

Note: If Focus Micro

is to be used in a multi

user environment, use

the supplied Cable Clip

to secure the display’s

cables to the Pole.

Cable Stop

Cable Clip

Note: Ensure enough

cable slack is given to

allow for movement.

10.2 After connecting cables,

Cable Clips and Cable Stops can

be installed to further manage

cables. Please See Over.

10. Cable Management

11. Insert Cable Stops

Note: Press down rmly onto

the other edge of the Cable

Stop and hold. This allows the

rear prole to ex in place

11.1 Insert Cable Stop on one

edge of the Pole Slot

11.2 Insert allen key into top cap

on pole

Allen Key

Storage

atdec.com | atdec.co.uk | atdec.com.au

No portion of this document or any artwork contained herein should be reproduced in any way without

the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer

12. Adjusting the Display Bracket

Portrait/ Landscape Tilt (Screen angle up/down) Pan (Screen angle left/right)

No Allen Key

necessary

No Allen Key necessaryNote: Support Screen when

adjusting tilt.

100mm

75mm

100mm 75mm

5mm

Allen Key

Tighten

Loosen

VESA 75 x 75 / 100 x 100mm

Inhaltsverzeichnis

Andere Atdec Rack & Stand Handbücher

Atdec

Atdec ADB-FS Bedienungsanleitung

Atdec

Atdec AWM-W6 Bedienungsanleitung

Atdec

Atdec TH-3060-UF Bedienungsanleitung

Atdec

Atdec AWMS-2-BT75 Bedienungsanleitung

Atdec

Atdec AWMS-2-4640-C Bedienungsanleitung

Atdec

Atdec AWMS-2-D13-C Bedienungsanleitung

Atdec

Atdec AWMS-2-BT75-H Bedienungsanleitung

Atdec

Atdec AF-AA Bedienungsanleitung

Atdec

Atdec AWMS-46W35 Bedienungsanleitung

Atdec

Atdec AWM-FC Bedienungsanleitung

Atdec

Atdec AWMS-2-BT75-G Bedienungsanleitung

Atdec

Atdec Visidec VF-AT-NP Bedienungsanleitung

Atdec

Atdec AWMS-2-BT75-FS Bedienungsanleitung

Atdec

Atdec AWM-A13-B Bedienungsanleitung

Atdec

Atdec AWMS-2-BT75-FS Bedienungsanleitung

Atdec

Atdec TELEHOOK 12/30 Multi Bedienungsanleitung

Atdec

Atdec VFS-DV Bedienungsanleitung

Atdec

Atdec AWMS-2-BT75-FS Bedienungsanleitung

Atdec

Atdec Telehook Bedienungsanleitung

Atdec

Atdec VFS-Q Bedienungsanleitung

Atdec

Atdec VISIDEC FOCUS ARTICULATED ARM DOUBLE Betriebsanleitung

Atdec

Atdec AWM-W6 Bedienungsanleitung

Atdec

Atdec TH-1040-CTS Bedienungsanleitung

Atdec

Atdec AWM-BT Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung