Atdec AWM-HS Bedienungsanleitung

AWM-HS Page 1 of 2

Installation Guide

AWM-HS

Slider

COMPONENT CHECKLIST

REQUIRED TOOLS

• Phillips Head Screwdriver

Slider

Assembly

(x1)

Screw

M4x10mm

(x4)

2.5mm

Allen key

(x1)

0 - 7kg

(0 - 15lbs)

Monitor weight should be

within the weight range of

all modular elements that

make up the complete

monitor mounting solution.

IMPORTANT INFORMATION

! Please ensure this product is installed as per these installation instructions.

! Curved monitors, deep devices (such as all-in-one PCs) and offset VESA locations exert additional leverage that can exceed

the capacity of the mount even though the monitor weight may be within the stated range.

! The manufacturer accepts no responsibility for incorrect installation.

! This product is compatible with AWM Series monitor arms: AWM-A13, AWM-A46, AWM-A71 and AWM-AD.

WEIGHT RANGE

AWM-HS Page 2 of 2

1. Attach slider to monitor

1.1 Fix the slider onto

monitor using the

provided screws.

Slider orientation should match your desired

monitor orientation, landscape or portrait.

Note: Ensure the lever is unlocked when tting.

3. Adjust the monitor position

3.1 To adjust the monitor’s horizontal position,

tilt it back slightly and slide left or right.

3.2 To level the screen simply rotate it

to the desired position.

3.3 (Optional) Monitor rotation

tension may be adjusted by

tightening or loosening a small

screw with the provided allen key.

PUSH

SLIDE

+/-

10°

atdec.com | atdec.co.uk | atdec.com.au

No portion of this document or any artwork contained herein should be reproduced in any way without

the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer

2. Mount slider on arm

2.1 Mount slider onto the monitor arm 2.3 Push the lever down to secure

it to the arm assembly

2.2 Ensure that the slider is seated fully into

the receptacle at the end of the monitor arm.

There should be no gap.

Gap No gap

Inhaltsverzeichnis

Andere Atdec Rack & Stand Handbücher

Atdec

Atdec AWM-A71-B Bedienungsanleitung

Atdec

Atdec AD-AC-PH Bedienungsanleitung

Atdec

Atdec AF-MC Bedienungsanleitung

Atdec

Atdec AWM-A13-B Bedienungsanleitung

Atdec

Atdec Visidec VF-AT-NP Bedienungsanleitung

Atdec

Atdec VFS-Q Bedienungsanleitung

Atdec

Atdec TH-3060-UF Bedienungsanleitung

Atdec

Atdec AWM 460 Arm Bedienungsanleitung

Atdec

Atdec 8060 Bedienungsanleitung

Atdec

Atdec AWMS-2-BT75-FS Bedienungsanleitung

Atdec

Atdec Spacedec Acrobat Swing Arm Double Bedienungsanleitung

Atdec

Atdec AWM-W35 Bedienungsanleitung

Atdec

Atdec AF-WD Bedienungsanleitung

Atdec

Atdec AWM 710 Arm Bedienungsanleitung

Atdec

Atdec AWMS-2-BT75-FS Bedienungsanleitung

Atdec

Atdec TH-1026-VF Bedienungsanleitung

Atdec

Atdec AF-M Bedienungsanleitung

Atdec

Atdec AWMS-2-BT75-FS Bedienungsanleitung

Atdec

Atdec AV Cart 75 Bedienungsanleitung

Atdec

Atdec AD-WM-7060 Bedienungsanleitung

Atdec

Atdec VF-AT-NP Bedienungsanleitung

Atdec

Atdec ADBS-2x1-17TC Bedienungsanleitung

Atdec

Atdec AWM-AD Bedienungsanleitung

Atdec

Atdec VFS-DH Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung