Atid AT870N Referenzhandbuch
Guide for Customer
AT870N
2
ATID Co., Ltd
ATID is a registered trademark of ATID Co., Ltd.
AT870N is a registered trademark of ATID Co., Ltd. and of its wholly owned subsidiaries.
ATID Co., Ltd.
#1205, Byuksan/GyungIn Digital Valley II, #481-10,
Gasan-Dong, Gumchon-Gu, Seoul, Korea
Tel: +82-2-544-1436
Fax: +82-2-2113-0040
www.atid1.com
Disclaimer
Copyright ⓒ2006 ATID Co., Ltd. An Unpublished Work – All right reserved.
No part of the contents of this documentation or the procedures described there in may be reproduced or
transmitted in any form or by any means without prior written permission of ATID Co., Ltd.. or its wholly owned subsidiaries ("ATID ").
Owners of ATID products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal business
purposes.
Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any
reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by contacting ATID Customer Administration. Electronic versions may either be
downloadable from the ATID web site (www.atid1.com) or provided on appropriate media.
If you visit our web site and would like to make comments or suggestions about this or other ATID publications, please let us know via the “Contact ATID ” page.
3
Contents
Page Contents
6
Before using manual for AT870N
Chapter 1. Caution when using AT870N
7
1. How to use battery correctly
7
2. Caution when using AT870N
Chapter 2. Product composition
8
1. Product composition
9
2. Name of each part
10
3. Function of each part
22 16. LOCK
Chapter 3. Basic function
11 1. Switch On Backup Battery
12 2. Attaching and Detaching the battery
13 3. Charging battery
13
15 5. Checking Battery Gauge
16 6. Backup Battery
16 7. Battery replacement
17 8. Soft Reset
17 9. Hard Reset
18 10. Initializing System
19 11. Attaching Micro SD card
20 12. Attaching SIM Card
21 13. Shortcuts setting
21 14. Set up phone password
22 15. Owner information
4
Page Contents
Chapter 3. Basic function(continues)
23 17. Memory
23 18. Task Manager
24 19. Remove the program
20. GPS
25 21. Set screen brightness
25 22. Backlight ON/OFF set up
26
33. Data transfer
Chapter 4. Optional module
37 1. Using 1D or 2D barcode scanner
40 2. Barcode emulator setting
44 3. Barcode scanning
45 4. Wi Power On /O
45 5. Wi function On /O
46 6. How to connect AP (1)
47 7. How to connect AP (2)
24
23. Screen adjustment
26 24. Volume and sounds setting
27 25. Sounds and notication
26. Set up the Clock and Alarms
28 27. Wireless Manager
28 28. Using keypad
28
27
29. Inputting Data
30. Using <Fun> Button
29 31. Use of stylus
30 32. Connecting PDA to PC
34
29
5
Page Contents
Chapter 4. Optional module(continues)
48 8. Bluetooth connection and termination
49 9. Bluetooth Pairing
51 10. Bixolon SPP-R200 Printer Demo
11. How to use Phone
52 12. Dialing
53 13. Receiving Phone Call
53 14. Hang o Phone Call
54 15. Contact List
54 16. How to search a contact information
55 17. Add to contact list
56 18. How to use Text Message
56 19. Sending Message
57 20. Receiving Message
57 21. Replying Message
58 22. GPS demo application execution
59 23. Use of camera
60 24. HF13.56 demo application execution
60 25. Mifare tag recognition
61 26. ISO15693 tag recognition
61 27. SmartCard demo application execution
62
52
28. UHF 900Mhz demo application execution
Chapter 5. Appendix
66 1. Product specication
6
■
◆
●
Before using manual for AT870N
User guide inclusive of text, images, logos, product names is either the property of, or used with permission by ATID CO.LTD. The information may not be distributed,
modi ed, displayed, reproduced (in whole or in part) without the prior written permission of ATID CO.LTD.
There are some di erences between user guide and actual function of device.
User guide can be adjusted by ATID CO.LTD without consent of user discretionally.
User guide is written for users who want to use and maintain the AT870N. Please read and understand these instruction prior to operating this unit.
Safety information
Your safety is extremely important. Read and follow all warnings and cautions in this document before you handle and operate ATID equipment. If you do not follow
the safety warnings and cautions, you might be seriously injured, and the equipment and data also might be damaged.
WARNIING
A warning requires you must pay attention to the operating procedure practice, condition, and statement strictly, or might be injured seriously.
CAUTION
A caution alerts you that you must be observe strictly when you operating procedure, practicing, con guring, for preventing from damage and destruction of
equipment, and loss of data.
NOTICE
A notice provide you the information which you must needs while you using AT870N.
7
Chapter 1. Caution when using AT870N
•
Caution when using AT870N
Please aware of the manual contents in advance before you handle and operate your AT870N and other ATID Products.
How to use battery correctly
In case that you dropped the main body or battery in water, please do not put into the stove or heater for drying. Just keep it in natural drying or contact purchase
place.
Please note that the battery terminal doesn’t have to be contacted to metallic object.
If you do not use the battery for a long time, please keep it at room temperature after charging.
Operating time of battery can be shorter than usual in accordance with loss of battery and use time. In this case, please contact us.
You have to use provided adaptor when charging the device.
Turn o the device properly then detach or replace the battery.
Caution when using AT870N
separately.
If you habe a problem on product, do not try to repair or disassemble it by yourself, please contact our customer service center.
r.
Please note that using the device in environmentof high temperature and humidity for long hours can make a malfunction of device.
•
•
•
•
•
•
•
•
•
User careless or products repair would damage the stored data. Manufacturer is not responsible for this damage, so please do back-up the important data
•
•
I the power immediately, then
please contact our customer service center.
If you have any other questions on use of device, please contact our customer service center.
8
Chapter 2. Product composition
Product Composition
Product composition
*Please contact our customer service in defect of product composition and need to be changed.
5.
3. Standard battery
6. Hand strap
2. Power Adapter and AC cable
1. AT870N main body
4. USB sync cable
7. Stylus pen
AT870N is baseduponMicrosoft window Mobile 6.5. As the state of the artproduct,
it is equippedwith barcode scanner, RFID Tag reader, MSRcardreader, printer, smart cardreader, MODEM, Camera andso on anditcanbe appliedtoIndustry, Enterprise, Logistics and so on, can be used
Camera (option)
Camera ash
(option)
Cradle connector
Earphone jack Charger jack
Sync Cable
Connector
Phone receiver WLAN LED
(option) Internal HF
Charge LED
Touch Screen
Keypad
Reset button Microphone
UHF
Scan button (F7,F8)
Gun handle
1D/2D Scanner
(option)
9
Chapter 2. Product composition
Name of each part
Battery latch
Hand strap hole
Battery
Volume button
UHF Connecting
port
Function of each part
Chapter 2. Product composition
NAME FUNCTION
Enableyouto connecttoadaptorwhichprovidedfrom factory.Charger jack
Enableyouto connecttoPC orchargingthe battery whileusing cradle.
Cradle connector
Camera (option) Itis possible toimage captureandsave.
Earphone jack Enable youtoconnecttoearphone.
Enable youtoconnectandsenddatatoPC via USBsynccable.Sync cable connector
ChargerLED willbe Redwhenthe batteryis charging, or will be greenwhenitis charged completely.Charger LED
Enable youtoinputkey value (number,alphabets,symbol), or executingassignedprograms.Keypad
Displayrunning programs, andcouldexecute, use, and exitprograms viato touchthescreen.Touch screen
Enable youtoperformawarm Reset, Press<Power>buttonsimultaneously, Enable youtoperformahardResetReset button
Displays whetherthewirelessWLAN power supply
WLAN LED (option)
Laserbeamemittedthroughthis window. Please be carefulthe foreignsubstances andpreventing fromthedamage.
Warning! Do notlookatthe laserbeam directly.
1D/2D Scanner (option)
Internal HF HF13.56MhzEmbeddedmodulemountinglocation.
Enable youtoattacha handstrap orastylus forthe convenience of using, while need tousethe device foralong periodtime.Hand strap hole
Enable youtoconductcommunicationMicrophone
Enableyouto detachingandattachingthe mainbattery.Battery latch
Enabletosupply the powerto the product.Battery
Itis possible toscan barcode orRFIDtagScan button (F7, F8)
Enable youtoinstall aUHF900Mhztag readermodule.UHF Connecting port
10
Andere Handbücher für AT870N
1
Inhaltsverzeichnis
Andere Atid Andere Handbücher
