Atlantis Land 10/100Mbps Bedienungsanleitung
16 ports
10/100Mbps Fats Ethernet Switch
Layer 2
with 1 optional port
100Base-FX Fiber Module
USER’S GUIDE
The Atlantis Land logo is a registered trademark of Atlants Land
SpA. All other names mentioned mat be trademarks or registered
trademarks of their respective owners. Subject to change without
notice. No liability for technical errors and/or omissions.
FCC Warning
This equipment has been tested and found to comply with the
regulations for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is
operated in a commercial environment. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with this user’s guide, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area
is likely to cause harmful interference, in which
case the user will be required to correct the
interference at his/her own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this
product may cause radio interference, in which
case the user may be required to take adequate
measures.
UL Warning
a) Elevated Operating Ambient Temperature- If installed in a
closed or multi-unit rack assembly, the operating
ambient temperature of the rack environment may
be greater than room ambient. Therefore,
consideration should be given to installing the
equipment in an environment compatible with the
manufacturer's maximum rated ambient
temperature (Tmra).
b) Reduced Air Flow- Installation of the equipment in a rack
should be such that the amount of air flow
required for safe operation of the equipment is not
compromised.
c) Mechanical Loading- Mounting of the equipment in the rack
should be such that a hazardous condition is not
achieved due to uneven mechanical loading.
d) Circuit Overloading- Consideration should be given to the
connection of the equipment to the supply circuit
and the effect that overloading of circuits might
have on over current protection and supply
wiring. Appropriate consideration of equipment
nameplate ratings should be used when
addressing this concern.
e) Reliable Earthing- Reliable earthing of rack-mounted
equipment should be maintained. Particular
attention should be given to supply connections
other than direct connections to the branch circuit
(e.g., use of power strips).
TABLE OF CONTENTS
ABOUT THIS GUIDE............................................................................ 1
PURPOSE .................................................................................................... 1
TERMS/USAGE........................................................................................... 1
INTRODUCTION .................................................................................. 3
FAST ETHERNET TECHNOLOGY ................................................................ 3
SWITCHING TECHNOLOGY ........................................................................ 4
VLAN (VIRTUAL LOCAL AREA NETWORK)............................................. 5
FEATURES.................................................................................................. 6
UNPACKING AND INSTALLATION ................................................ 7
UNPACKING ............................................................................................... 7
INSTALLATION........................................................................................... 8
RACK MOUNTING...................................................................................... 9
CONNECTING NETWORK CABLE ............................................................. 10
AC POWER .............................................................................................. 10
IDENTIFYING EXTERNAL COMPONENTS ................................ 11
FRONT PANEL.......................................................................................... 11
REAR PANEL............................................................................................ 12
UNDERSTANDING LED INDICATORS ......................................... 13
POWER AND SYSTEM LEDS.................................................................... 13
PORTS 1~16 STATUS LEDS..................................................................... 14
FIBER MODULE LEDS............................................................................. 14
CONFIGURATION.............................................................................. 15
CONSOLE PORT (RS-232 DCE)............................................................... 15
CONFIGURING THE SWITCH..................................................................... 16
LOGIN ...................................................................................................... 17
MAIN MENU ............................................................................................ 18
CONFIGURING SETUP SETTING................................................................ 19
CONFIGURING SYSTEM SETTING............................................................. 23
CONFIGURING FILE SETTING................................................................... 24
STATISTICS .............................................................................................. 25
TECHNICAL SPECIFICATIONS ..................................................... 28
A02-F16-F/M2 (september 2002)
1
ABOUT THIS GUIDE
Congratulations on your purchase of the 16-Port 10/100Mbps
Fast Ethernet Smart Switch. This device
integrates 100Mbps Fast Ethernet and 10Mbps
Ethernet network capabilities in a highly flexible
package.
Purpose
This guide discusses how to install your 16-Port 10/100Mbps
Fast Ethernet Smart Switch.
Terms/Usage
In this guide, the term “Switch” (first letter upper case) refers to
your 16-Port 10/100Mbps Fast Ethernet Smart
Switch, and “switch” (first letter lower case)
refers to other Ethernet switches.
3
INTRODUCTION
This chapter describes the features of the 16-Port 10/100Mbps
Fast Ethernet Smart Switch and some background
information about Ethernet/Fast Ethernet and
Switching technology.
Fast Ethernet Technology
The growing importance of LANs and the increasing complexity
of desktop computing applications are fueling the
need for high performance networks. A number of
high-speed LAN technologies have been proposed
to provide greater bandwidth and improve
client/server response times. Among them,
100BASE-T (Fast Ethernet) provides a non-
disruptive, smooth evolution from the current
10BASE-T technology. The non-disruptive and
smooth evolution nature, and the dominating
potential market base, virtually guarantee cost-
effective and high performance Fast Ethernet
solutions.
100Mbps Fast Ethernet is a standard specified by the IEEE 802.3
LAN committee. It is an extension of the 10Mbps
Ethernet standard with the ability to transmit and
receive data at 100Mbps, while maintaining the
CSMA/CD Ethernet protocol. Since the 100Mbps
Fast Ethernet is compatible with all other 10Mbps
Ethernet environments, it provides a
straightforward upgrade and takes advantage of
4
the existing investment in hardware, software, and
personnel training.
Switching Technology
Another approach to pushing beyond the limits of Ethernet
technology is the development of switching
technology. A switch bridges Ethernet packets at
the MAC address level of the Ethernet protocol
transmitting among connected Ethernet or Fast
Ethernet LAN segments.
Switching is a cost-effective way of increasing the total network
capacity available to users on a local area
network. A switch increases capacity and
decreases network loading by dividing a local
area network into different segments, which don’t
compete with each other for network transmission
capacity.
The switch acts as a high-speed selective bridge between the
individual segments. The switch, without
interfering with any other segments,
automatically forwards traffic that needs to go
from one segment to another. By doing this the
total network capacity is multiplied, while still
maintaining the same network cabling and adapter
cards.
Switching LAN technology is a marked improvement over the
previous generation of network bridges, which
were characterized by higher latencies. Routers
have also been used to segment local area
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Atlantis Land Netzwerk-Router Handbücher
Atlantis Land
Atlantis Land A02-F16-F Betriebsanleitung
Atlantis Land
Atlantis Land A02-F8-2C Betriebsanleitung
Atlantis Land
Atlantis Land Network Router Bedienungsanleitung
Atlantis Land
Atlantis Land A02-G8 Bedienungsanleitung
Atlantis Land
Atlantis Land I-Storm A02-RA(Atmos)_ME01 Installationshandbuch
Atlantis Land
Atlantis Land A02-RA241-W54 Bedienungsanleitung
Atlantis Land
Atlantis Land A02-RA243-W54M Bedienungsanleitung
Atlantis Land
Atlantis Land WebShare A02-WS1 Bedienungsanleitung
Atlantis Land
Atlantis Land WebShare 144WN Bedienungs- und Wartungshandbuch
Atlantis Land
Atlantis Land A02-G8D Bedienungsanleitung
Atlantis Land
Atlantis Land Edge-Core A07-ES3628C Bedienungsanleitung
Atlantis Land
Atlantis Land A02-F5P Bedienungsanleitung
Atlantis Land
Atlantis Land A02-RA241-W54 Bedienungsanleitung
Atlantis Land
Atlantis Land Edge-Core A07-ES4524C Bedienungsanleitung
Atlantis Land
Atlantis Land A02-RA ME01 Bedienungsanleitung
Atlantis Land
Atlantis Land I-Fly A02-WRA-11B Bedienungsanleitung
Atlantis Land
Atlantis Land A02-RA242-W54_GX01 Bedienungsanleitung
Atlantis Land
Atlantis Land Edge-Core A07-ES4625 Bedienungsanleitung
Atlantis Land
Atlantis Land Edge-Core A07-ES4626-SFP Bedienungsanleitung
Atlantis Land
Atlantis Land A02-RA MI01 Service-Handbuch
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise