Atlona AT-HD-V40SRS Bedienungsanleitung

AtlonA

HDMI v1.3 Extender over Single CAT5E/6

up to 200ft

MODEL: AT-HD-V40SRS

User’s Manual

Rev.0912

TABLE OF CONTENTS

1. Introduction ....................................................................... 1

2. Features ....................................................................... 1

3. Specifications ....................................................................... 2

4. Package Contents ....................................................................... 3

5. Connection Diagram ....................................................................... 3

6. Panel Description ....................................................................... 4

6.1 Sender Unit −AT-HD-V40SS .......................................................... 4

6.2 Receiver Unit −AT-HD-V40RS .......................................................... 5

7. Installation ....................................................................... 6

8. EDID Learning ....................................................................... 6

9. Notice ....................................................................... 7

10. Performance Guide ....................................................................... 7

11. Safety Information ..................................................................... 8

10. Warranty ...................................................................... 9

11. Atlona Product Registration .................................................................. 10

INTRODUCTION

FEATURES

Atlona Technologies Atlona’s AT-HD-V40SRS HDMI 1.3 over Single CAT5 Extender boosts up your

video/audio transmission distance up to 60m (200ft) in HDTV 1080i format, 40m (130ft) in HDTV

1080p format, and 20m (65ft) in HDTV 1080p with 36 bit color depth. With only one cost effective

solid Cat-5/5e/6 UTP/STP cable, users can readily extend HDTV sources from DVD players, Blu-ray

Disc player, PS3, PC, and any other kinds of sources compliant with TMDS to distant display monitors

including HDMI or DVI enabled TV sets or LCD PC monitors.

With the state-of-the-art Silicon Image HDMI 1.3 chipsets equipped, deep color video, DTS-HD or

Dolby TrueHD audio, and HDCP supports and compatibility are all further insured. This flexibility

makes HDCP compliant BD players or PS3 transmit utmost high quality video and audio with a

greater distance at the minimal cost, when integrating several components apart.

The AT-HD-V40SRS includes two units: Sender (AT-HD-V40SS) and Receiver (AT-HD-V40RS) units.

The Sender unit is used to capture the input HDMI/DVI signals and carry the signals through one RJ-

45 connector into one cost effective solid Cat-5/5e/6 UTP/STP cable. The Receiver unit is responsible

for equalizing the sent TMDS multimedia data. The transmission distance between the sender and

receiver units can be up to 60m (200ft) under HD (720p/1080i) or 40m (130ft) under Full HD (1080p).

With an 8-level equalization control switch on the receiving unit, users can adjust the equalization

strength to the received TMDS signals accordingly, and therefore optimize the transmission distance

between source and destination.

State-of-the-art Silicon Image (founder of HDMI) chipset embedded for utmost compatibility and

reliability

HDMI 1.3c compliant

Extend the transmission length up to 60m (200ft) from the HDMI sources under HD resolution

(1080i or 720p at 24-bit color depth)

Extend the transmission length up to 40m (130ft) from the HDMI sources under Full HD

resolution (1080p at 24-bit color depth)

Extend the transmission length up to 20m (65ft) from the HDMI sources under Full HD

resolution (1080p at 36-bit color depth)

HDCP 1.1 compliant

Minimize the cable skew by adjustable 8-level equalization rotary control

Pure unaltered uncompressed 7.1ch digital HDMI over CAT5/6 cable transmission

DTS-HD and Dolby True HD high bit rate audio support

Allows cascading

Wall mounting housing design for easy and robust installation

Perfectly integrated with other HDMI over CAT5 series products

Note: The length depends on the characteristics and quality of the cables. Higher

resolutions and longer transmission distances require low skew cables (<25ns/100m)

for best performance. Unshielded CAT6 with metal RJ-45 connectors is recommended

SPECIFICATIONS

Model Name AT-HD-V40SRS

Technical TX RX

Role of usage Sender (AT-HD-V40SS) Receiver (AT-HD-V40RS)

HDMI compliance HDMI 1.3c

HDCP compliance Yes

Video bandwidth Single-link 225MHz (6.75Gbps)

Video support 480i / 480p / 720p / 1080i / 1080p60 24/30/36-bit color

HDMI transmission

[24-bit] Full HD (1080p) −40m (130ft) [CAT5e] / 50m (165ft) [CAT6]

HD (720p/1080i) −50m (165ft) [CAT5e] / 60m (200ft) [CAT6]

Audio support Surround sound (up to 7.1ch) or stereo digital audio

Equalization 8-level digital control at receiver

Input TMDS signal 1.2 Volts [peak-to-peak]

Input DDC signal 5 Volts [peak-to-peak, TTL]

ESD protection [1] Human body — ±19kV (air-gap discharge) & ±12kV (contact discharge)

[2] Core chipset — ±8kV

Input 1x HDMI 1x RJ-45

Output 1x RJ-45 1x HDMI

HDMI connector Type A [19-pin female]

RJ-45 connector WE/SS 8P8C with 2 LED indicators

Rotary control switch Mode selection Signal level equalization

Mechanical

Housing Metal enclosure

Dimensions

[L x W x H] Model 93 x 60 x 25mm [3.7” x 2.4” x 1”] for sender/receiver

Package 270 x 175 x 80mm (10.6” x 6.9” x 3.1”)

Weight Model 405g (14 oz)

Package 815g (1.8 lbs)

Fixedness Wall-mounting case with screws

Power supply 5V DC

Power consumption 1 Watt [max]

Operation temperature 0~40°C (32~104°F)

Storage temperature -20~60°C (-4~140°F]

Relative humidity 20~90% RH (no condensation)

PACKAGE CONTENTS

CONNECTION DIAGRAM

1x AT-HD-V40SRS (sender and receiver unit)

2x 5V DC power supply unit

1x User's manual

HDMI Source

AT-HD-V40SS Single Cat-5e

Single Cat-5e HDMI Cable

HDMI Display

AT-HD-V40RS

AT-HD15SRS AT-DVI15SRS

HDMI Projector/Display DVI Projector/Display

NEL DESCRIPTION

Sender Unit: AT-HD-V40SS

Input Panel

HDMI IN: Connects to a HDMI source with a HDMI male-male cable here

MODE: 0 = [Video] – supports up to HDMI 1.3 output. [Audio] – supports up to 7.1ch output

1 = [Video] – supports up to HDMI 1.3 output. [Audio] – locks to stereo audio output

2 = [Video] – locks to HDMI 1.2 output. [Audio] – supports up to 7.1ch output

3 = [Video] – locks to HDMI 1.2 output. [Audio] – locks to stereo audio output

4 = [Video] – DVI display mode. [Audio] – no audio output

5 = [Safe Mode] – uses default EDID1with video supported up to 720p/1080i

6 = [Default Mode] – uses default EDID2with video supported up to 1080p

7 = [EDID Learning Mode] – learns EDID3from the display

Note for EDID (Extended Display Identification Data) learning

1. If you cannot get the audio/video output from the connected display from the first time setup.

Please follow the instructions below to check if the extender is OK:

Step 1 –Please set the rotary arrow on TX at “Mode 5” for Safe Mode, and wait for the LED of the

RJ-45 connector blinks for a couple seconds.

Step 2 –Please turn the rotary arrow counterclockwise [] from Mode 5 to Mode 3. If you can get

audio/video from the display, you can stay tune at this setting for 720p or 1080i and stereo

audio. If you need to get 720p/1080i with 7.1ch audio output, please turn the rotary arrow

counterclockwise [] from Mode 3 to Mode 2. For better audio/video output, please check

Note#2. If you still cannot get the audio/video out normally, please go on the next step.

Step 3 –Please turn the rotary arrow counterclockwise [] from Mode 3 to Mode 7. Wait a few

seconds until the LED of the RJ-45 connector dims and then lights again.

Step 4 –Please turn the rotary arrow clockwise [] from Mode 7 to Mode 1. You should have normal

audio/video output. If not, please contact technical support.

2. For desirable 1080p video output, please follow the instructions below:

Step 1 –Please set the rotary arrow on TX at “Mode 6” for Default Mode, and wait for the LED of

the RJ-45 connector blinks for a couple seconds.

Step 2 –Please turn the rotary arrow clockwise [] from Mode 6 to Mode 1. If you can get

audio/video from the display, you can stay tune at this setting for 1080p and stereo audio. If

you need to get 1080p with 7.1ch audio output, please turn the rotary arrow

counterclockwise [] from Mode 1 to Mode 0. If you cannot get the audio/video out

normally, please go on the next step.

Step 3 –Please turn the rotary arrow counterclockwise [] from Mode 0/1 to Mode 7. Wait a few

seconds until the LED of the RJ-45 connector dims and then lights again.

Step 4 –Please turn the rotary arrow clockwise [] from Mode 7 to Mode 0/1. You should have your

desirable audio/video output. If not, please follow the instruction in Note#1.

3. To learn EDID from the HDMI display, please follow the instruction below:

Step 1 –Please connect the display which you want to read EDID with a HDMI cable to the

transmitter’s HDMI IN and set the rotary arrow at Mode 7 so the TX can learn the EDID

information from the connected display. The LED on the RJ45 connector of TX will dim and

light again in a few seconds, which indicates the EDID learning procedure is complete.

Step 2 –Please turn the rotary arrow clockwise [] from Mode 7 to Mode 0 or Mode 1 for desirable

audio setting and enjoy the experience. DO NOT let the rotary arrow pass by Mode 5 and

Mode 6 which will erase the EDID just learned and restore the default EDID.

Output Panel

+5V DC: Connect to 5V DC power supply unit.

HDMI Signal OUT: Connect to the HDMI Signal IN on the receiver unit AT-HD-V40RS with a solid Cat-

5/5e/6 UTP/STP cable

Receiver Unit: AT-HD-V40RS

Input Panel

+5V DC: Connect to 5V DC power supply unit.

HDMI Signal IN: Connect to the HDMI Signal OUT on the sender unit AT-HD-V40SS with a solid Cat-

5/5e/6 UTP/STP cable

HARDWARE INSTALLATION

EDID LEARNING

Output Panel

Signal Level: Adjust the 8-level signal equalization control to the received HDMI signals. The HDMI

signal level varies from 0 (strongest) to 7 (weakest) for respective transmission length from longest

possible range to short distance. Dial the Signal Level from 7 to 0 and stop turning the rotary

switch whenever the audio/video is playing normally. Inappropriate signal level setting may cause

overpowering issues that would shorten the product’s life significantly!

HDMI OUT: Connect to a HDMI display or projector with a HDMI male-male cable here.

1. Connect the HDMI or DVI source (such as a Blu-ray Disc player) to the Sender Unit AT-HD-V40SS.

2. Connect the HDMI or DVI display (such as a LCD HDTV) to the Receiver Unit AT-HD-V40RS.

3. Connect a solid Cat-5/5e/6 UTP/STP cable between the Sender and Receiver units.

4. Make sure this solid Cat-5/5e/6 UTP/STP cable is tightly connected and not loose.

5. Plug in 5V DC power supply unit to the interlocking power jack of the Receiver Unit AT-HD-V40RS.

6. Plug in 5V DC power supply unit to the interlocking power jack of the Sender Unit AT-HD-V40SS.

7. If you see flickering or blinking image on the display, adjust the rotary control switch to improve the

cable skew. 0 stands for the strongest HDMI signal level for longest possible transmission length while

7 stands for the weakest HDMI signal level for short transmission length. Try adjusting the signal level

from 7 to 0 to find the optimal setting for the HDMI over CAT5 transmission.

1. Turn on Sender unit AT-HD-V40SS.

2. Turn the MODE of AT-HD-V40SS to 7.

3. Connect the HDMI display to the HDMI IN of AT-HD-V40SS with a HDMI cable. The LED on the RJ-45

connector of AT-HD-V40SS will dim and light again, which indicates the EDID learning procedure is

complete.

4. Turn the MODE of AT-HD-V40SS clockwise []from 7to 0(for surround sound) or 1(for stereo). The

most important thing is don’t let the rotary arrow pass through MODE 5 and MODE 6 which will

erase the EDID just learned and restore to default EDID.

5. Unplug the HDMI cable from the display and follow the instruction in [Hardware Installation] to set up

the AT-HD-V40SRS and enjoy the experience.

NOTICE

PERFORMACE GUIDE

1. When adjusting the signal level on the receiver unit, dial the rotary control switch from 7 to 0 and

stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate signal

level setting may cause overpowering issues that would shorten the product’s life significantly!

2. If the DVI or HDMI device requires the EDID information, please use AT-DVISync EDID

Reader/Writer to retrieve and provide EDID information of the DVI or HDMI display or AV receiver.

3. All HDMI over CAT5 transmission distances are measured using Belden CAT5e 125MHz UTP

cable and ASTRODESIGN Video Signal Generator VG-859C.

4. The transmission length is largely affected by the type of category cables, the type of HDMI

sources, and the type of HDMI displays. The testing result shows solid UTP cables (usually in the

form of 300m or 1,000ft bulk cables) can transmit a lot longer signals than stranded UTP cables

(usually in the form of fixed length patch cords). A solid UTP Cat-5e cable shows longer

transmission range than a stranded STP Cat-6 cable. For long extension applications, solid

UTP/STP cables are the only viable choice.

5. EIA/TIA-568-B termination (T568B) for category cables is recommended for better performance.

6. To reduce the interference among the unshielded twisted pairs of wires in a category cable,

shielded STP cables are better suited than unshielded UTP cables to improve EMI problems,

which is worse in long transmission.

7. Because the quality of the category cables has the major effect on how long the transmission limit can

achieve and how good is the received picture quality, the actual transmission range is subject to one’s

choice of Cat-5/5e/6 cables. For desired resolutions greater than 1080i or 1280x1024, a Cat-6 cable

is recommended.

8. If your HDMI display has multiple HDMI inputs, it is found that the first HDMI input [HDMI input #1]

generally can produce better transmission performance among all HDMI inputs.

Performance rating Type of category cable

Wiring Shielding CAT5 CAT5e CAT6

Solid Unshielded (UTP)   

Shielded (STP)   

Stranded Unshielded (UTP)  

Shielded (STP) 

Termination Use EIA/TIA-568-B termination (T568B) at any time

SAFETY INFORMATION

Safeguards

To reduce the risk of electric shock, do not

expose this product to rain or moisture.

If the wall plug does not fit into your local power

socket, hire an electrician to replace your

obsolete socket.

Do not modify the wall plug.

Doing so will void the warranty and safety

features.

This equipment should be installed near the

socket outlet and the device should be easily

accessible in case it requires disconnection.

Precautions

FCC Regulations state that any unauthorized

changes or modifications to this equipment not

expressly approved by the manufacturer could

void the user’s authority to operate this

equipment.

Operate this product using only the included

external power supply. Use of other power

supplies could impair performance, damage the

product or cause fires.

In the event of an electrostatic discharge, this

device may automatically turn off. If this occurs,

unplug the device, and plug it back in.

Protect and route power cords so they will not be

stepped on or pinched by anything placed on or

against them. Be especially careful of plug-ins, or

cord exit points from this product.

Avoid excessive humidity, sudden temperature

changes or temperature extremes.

Keep this product away from wet locations such

as bathtubs, sinks, laundries, wet basements

and swimming pools.

Use only accessories recommended by ATLONA

to avoid fire, shock or other hazards.

Unplug the product before cleaning. Use a

damp cloth for cleaning. Do not use cleaning

fluid or aerosols, which could enter the unit and

cause damage, fire or electrical shock. Some

substances may also mar the finish of the

product.

Never open or remove unit panels or make any

adjustments not described in this manual.

Attempting to do so could expose you to

dangerous electrical shock or other hazards. It

may also cause damage to your AT-HD-

V40SRS. Opening the product will void the

warranty.

Do not attempt to service the unit. Instead

disconnect it and contact your Authorized

ATLONA reseller or contact ATLONA directly.

Andere Handbücher für AT-HD-V40SRS

Inhaltsverzeichnis

Andere Atlona Extender Handbücher

Atlona

Atlona AT-AV-SR Bedienungsanleitung

Atlona

Atlona AT-SDI10SR-LC Bedienungsanleitung

Atlona

Atlona AT-COMP150SR Bedienungsanleitung

Atlona

Atlona AT-HD-RG100SR Bedienungsanleitung

Atlona

Atlona AT-UHD-EX-70C-KIT Bedienungsanleitung

Atlona

Atlona AT-DVI40SRS Bedienungsanleitung

Atlona

Atlona AT-HDTX-ROADNET Bedienungsanleitung

Atlona

Atlona AT-RS232SRS Bedienungsanleitung

Atlona

Atlona AT-HD4-SI40SR Bedienungsanleitung

Atlona

Atlona AT-PRO2HDREC Bedienungsanleitung

Atlona

Atlona AT-VGA180AS Bedienungsanleitung

Atlona

Atlona AT-HD-RG100SR Bedienungsanleitung

Atlona

Atlona AT-UHD-EX-100CE-TX Bedienungsanleitung

Atlona

Atlona AT-HD-RG100SR Bedienungsanleitung

Atlona

Atlona AT-HDMI40SRS Bedienungsanleitung

Atlona

Atlona AT-VGA-RS300SRS Bedienungsanleitung

Atlona

Atlona AT-PRO2HDREC-DA Bedienungsanleitung

Atlona

Atlona AT-HDF20SR Bedienungsanleitung

Atlona

Atlona AT-COMP300SL Bedienungsanleitung

Atlona

Atlona AT-HDF30SR Bedienungsanleitung

Atlona

Atlona AT-DVIDF40SR Bedienungsanleitung

Atlona

Atlona AT-PRO3HDREC Bedienungsanleitung

Atlona

Atlona AT-COMP300SR Bedienungsanleitung

Atlona

Atlona AT-VBNC400SR Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung