Atlona Omega AT-OME-EX-KIT Bedienungsanleitung
1
Installation Guide
AT-OME-EX-KIT
Omega™4K/UHD
HDMI Over HDBaseT TX/RX with USB, Control, and PoE
AT-OME-EX-KIT
The Atlona AT-OME-EX-KIT is an HDBaseT extender for video up to 4K/60 4:2:0, plus
embedded audio, control, Ethernet, and USB 2.0 over distances up to 330 feet (100 meters).
Part of the Omega™Series of integration products for modern AV communications and
collaboration, the OME-EX-KIT is HDCP 2.2 compliant and extends IR, RS-232, and IP control
signals. The integrated USB extension is ideal for software video conferencing and the use of
touch or interactive displays. The OME-EX-TX transmitter includes a USB host port for a PC,
plus two peripheral devices such as a speakerphone, microphone, or keyboard and mouse. The
OME-EX-RX receiver provides two USB 2.0 interfaces for devices such as a camera or display.
The transmitter and receiver are available separately, for use with other Omega Series integration
products.*
* Both the AT-OME-EX-TX and AT-OME-EX-RX are not compatible with the AT-UHD-HDVS-300
system for extending USB.
IMPORTANT: Visit http://www.atlona.com/product/AT-OME-EX-KIT for the
latest rmware updates and User Manual.
1 x AT-OME-EX-TX
1 x AT-OME-EX-RX
2 x Captive screw connectors, 4-pin
2 x Mounting plates
4 x Mounting screws
1 x 48 V DC power supply
1 x Installation Guide
Package Contents
2
Installation Guide
AT-OME-EX-KIT
1 LAN
Connect a category cable from this port to a network switch. This cable provide IP pass-
through transport control from a control system to the display (sink) device connected to the
receiver.
2 DEVICE
Connect up to two USB devices (e.g. mouse, keyboard, etc.) to these ports. Each port
provides 5 V / 500 mA.
3 HOST
Connect a USB cable from this port to the host computer.
4 FW
Connect a mini USB-to-USB cable from this port, to a computer, to update the rmware.
Refer to Updating the Firmware (page 10) for more information.
5 PWR / LINK
The PWR LED indicator will glow green when the AT-OME-EX-TX is powered. The AT-OME-
EX-RX supplies power to the AT-OME-EX-TX over HDBaseT. The LINK LED indicator glows
yellow when a solid link is established between the transmitter and receiver. Refer to LED
Indicators (page 7) for more information.
6 RS-232 / IR
Connect the included 4-pin captive screw block to this receptacle. Refer to RS-232 and IR
(page 4) for more information.
7 HDBaseT OUT
Connect a category cable from this port to the HDBaseT IN port of the AT-OME-EX-RX or
other PoE-compatible receiver.
8 HDMI IN
Connect an HDMI cable from this port to the source device.
Front
Rear
LANHDBaseT IN DC 48V
AT-OME-EX-RX
HDMI OUT
RX TXTX
RS-232 IR
LAN FWHOST
OMEGATM
DEVICE
PWR
LINK
AT-OME-EX-RX
FW
PWR
LINK
OMEGATM DEVICE
HDMI IN
AT-OME-EX-TX
HDBaseT OUT
RX RXTX
RS-232 IR
8
6 7
LANHDBaseT IN DC 48V
AT-OME-EX-RX
HDMI OUT
RX TXTX
RS-232 IR
LAN FWHOST
OMEGATM
DEVICE
PWR
LINK
AT-OME-EX-RX
FW
PWR
LINK
OMEGATM DEVICE
HDMI IN
AT-OME-EX-TX
HDBaseT OUT
RX RXTX
RS-232 IR
2
1 3 4 5
AT-OME-EX-TX
3
Installation Guide
AT-OME-EX-KIT
LANHDBaseT IN DC 48V
AT-OME-EX-RX
HDMI OUT
RX TXTX
RS-232 IR
LAN FWHOST
OMEGATM
DEVICE
PWR
LINK
AT-OME-EX-RX
FW
PWR
LINK
OMEGATM DEVICE
HDMI IN
AT-OME-EX-TX
HDBaseT OUT
RX RXTX
RS-232 IR
LANHDBaseT IN DC 48V
AT-OME-EX-RX
HDMI OUT
RX TXTX
RS-232 IR
LAN FWHOST
OMEGATM
DEVICE
PWR
LINK
AT-OME-EX-RX
FW
PWR
LINK
OMEGATM DEVICE
HDMI IN
AT-OME-EX-TX
HDBaseT OUT
RX RXTX
RS-232 IR
1 PWR / LINK
The PWR LED indicator will glow green when the AT-OME-EX-RX is powered. The LINK
LED indicator glows yellow when a solid link is established between the transmitter and
receiver. Refer to LED Indicators (page 7) for more information.
2 FW
Connect a mini USB-to-USB cable from this port, to a computer, to update the rmware.
Refer to Updating the Firmware (page 10) for more information.
3 DEVICE
Connect up to two USB 2.0 devices (e.g. mouse, keyboard, etc.) to these ports. Each port
provides 5 V / 500 mA.
4 HDBaseT IN
Connect a category cable from this port to the HDBaseT OUT port of the AT-OME-EX-TX.
The AT-OME-EX-TX is powered by the AT-OME-EX-RX over HDBaseT.
5 HDMI OUT
Connect an HDMI cable from this port to the display (sink) device.
6 LAN
Connect a category cable from this port to the display (sink) device. This cable provides IP
pass-through transport control to the display (sink) device, from a control system connected
to the transmitter.
7 RS-232 / IR
Connect the included 4-pin captive screw block to this receptacle. Refer to RS-232 and IR
(page 4) for more information.
8 DC 48V
Connect the included 48 V DC power supply to this power receptacle.
1
5
2 3
4 6 7 8
Front
Rear
AT-OME-EX-RX
4
Installation Guide
AT-OME-EX-KIT
The AT-OME-EX-KIT provides pass-through transport of RS-232 protocol and/or IR over
HDBaseT, which allows communication between a control system and an RS-232 or IR device.
This step is optional.
1. Use wire strippers to remove a portion of the cable jacket.
2. Remove at least 3/16” (5 mm) from the insulation of the RX, TX, and GND wires for the RS-
232 connection.
3. Insert the TX, RX, and GND wires into correct terminal using one of the included 4-pin
captive screw connectors.
4. Repeat step 2 for the S and GND wires for the IR connection.
5. Insert the S (signal) wire in to the TX terminal and the ground wire to the GND terminal.
6. Tighten the captive screws to secure the wires in place. Do not over-tighten or use high-
torque devices to prevent damage to the connector block.
NOTE: Typical DB9 connectors use pin 2 for TX, pin 3 for RX, and pin 5 for
ground. On some devices functions of pins 2 and 3 are reversed. Note that the
signal (S) pin for the IR is labeled as “TX” on the port.
GND
to control system
or AT-VCC-IR-KIT
DE-9 (RS-232) port
RX
TX
S
GND
RS-232 and IR
5
Installation Guide
AT-OME-EX-KIT
1. Connect a UHD/HD source to the HDMI IN port on the transmitter.
2. Connect a UHD/HD display to the HDMI OUT port on the receiver.
3. Connect a USB cable from the host computer to the HOST port on the transmitter.
4. Connect up to two USB devices (speakerphone, etc.) to the DEVICE ports on the
transmitter. Each port provides 5 V / 500 mA.
5. Connect up to two USB devices (mouse, keyboard, etc.) to the DEVICE ports on the
receiver. Each port provides 5 V / 500 mA.
6. Connect a category cable, from the HDBaseT OUT port on the transmitter, to the HDBaseT
IN port on the receiver.
7. OPTIONAL: Connect an Ethernet cable from the LAN port, on the transmitter to a network
switch. This cable provide IP pass-through transport control from a control system to the
display (sink) device connected to the receiver. Connect an Ethernet cable from the LAN
port, on the receiver, to the display (sink) device.
8. OPTIONAL: Connect an RS-232 cable between a control system and the RS-232 port on
the transmitter. Connect the RS-232 device to the RS-232 port on the receiver. Refer to
RS-232 and IR (page 4) for more information.
9. OPTIONAL: Connect an IR emitter to the IR port on the transmitter. Connect an IR receiver
to the IR port on the receiver. Refer to RS-232 and IR (page 4) for more information.
10. Connect the included 48 V DC power supply to the DC 48V power receptacle on the
transmitter.
11. Connect the power supply to an available AC outlet.
Refer to the tables below for recommended cabling when using Altona products with HDBaseT.
The green bars indicate the signal quality when using each type of cable. Higher-quality signals
are represented by more bars.
Core Shielding CAT5e CAT6 CAT6a CAT7
Solid UTP (unshielded) N/A
STP (shielded)
*Atlona recommends TIA/EIA 568-B termination for optimal performance.
Cable* Max. Distance @ 4K Max. Distance @ 1080p
CAT5e 295 feet (90 meters) 330 feet (100 meters)
CAT6 / CAT6a / CAT7 330 feet (100 meters) 330 feet (100 meters)
IMPORTANT: Stranded or patch cables are not recommended due to
performance issues.
Installation
Cable Recommendation Guidelines
6
Installation Guide
AT-OME-EX-KIT
HDBaseT
USB
AT-OME-EX-TX
Microphone / Speaker
AT-HDVS-CAM
Desktop
Computer
HDMI
USB
LAN FWHOST
OMEGA
TM
DEVICE
PWR
LINK
USB
USB
USB
IP Control
AT-OME-EX-RX
FW
PWR
LINK
OMEGA
TM
DEVICE
AT-OME-EX-RX
RS-232 / IR
Display
IP Control
HDMI
USB
1
0
X
Z
o
o
m
F
1
.
6
-
F
3
.
0
f
4
.
7
m
m
-
f
4
7
m
m
1
0
X
Z
o
o
m
F
1
.
6
-
F
3
.
0
-
f
4
7
m
m
LAN
Connection Diagram
7
Installation Guide
AT-OME-EX-KIT
LINK Description
Solid yellow The link integrity between the transmitter and the receiver is
good.
Blinking yellow Poor signal integrity between the transmitter and the receiver.
• Make sure that the category cable between the HDBaseT
IN port on the transmitter and the HDBaseT OUT port on
the receiver is secure.
• The category cable may be compromised. Try using a
dierent category cable. Make sure that the cable is solid
core. Stranded or patch cables are not recommended.
O The link integrity between the transmitter and the receiver is
compromised.
• Check the category cable between the HDBaseT IN port
on the transmitter and the HDBaseT OUT port on the
receiver.
PWR Description
Solid green Unit is powered.
O Unit is not powered.
• Verify that the locking connector is securely fastened to the
power receptacle.
• Make sure that the power supply is connected to an active
AC outlet.
The PWR and LINK LED indicator on both the transmitter and receiver unit provides basic
information on the current status of the AT-OME-EX-KIT. The information in the table below
applies to both the transmitter and receiver unit.
LED Indicators
8
Installation Guide
AT-OME-EX-KIT
Both the AT-OME-EX-TX and AT-OME-EX-RX provide two mounting brackets, which can be used
to attach the unit to any at surface. Use the two enclosure screws, on the sides of the unit to
attach the mounting brackets.
1. Using a small Phillips screwdriver, remove the two screws from the left side of the
enclosure.
AT-OME-EX-RX
FW
PWR
LINK
OMEGA
TM
DEVICE
AT-OME-EX-RX
FW
PWR
LINK
OMEGA
TM
DEVICE
LAN FWHOST
OMEGA
TM
DEVICE
PWR
LINK
LAN FWHOST
OMEGA
TM
DEVICE
PWR
LINK
2. Position one of the mounting brackets, as shown below, aligning the holes on the side of the
enclosure with one set of holes on the mounting bracket.
3. Use the screws from Step 1 to attach the mounting bracket.
Mounting Instructions
9
Installation Guide
AT-OME-EX-KIT
4. Repeat these steps to attach the second mounting bracket to the opposite side of the unit.
5. Mount the unit to a at surface using the oval-shaped holes, on each mounting bracket.
If using a drywall surface, a #6 drywall screw is recommended.
AT-OME-EX-RX
FW
PWR
LINK
OMEGA
TM
DEVICE
LAN FWHOST
OMEGA
TM
DEVICE
PWR
LINK
10
Installation Guide
AT-OME-EX-KIT
Requirements:
• AT-OME-EX-TX
• AT-OME-EX-RX
• Firmware le
• Computer running Windows
• USB-A to USB mini-B cable
1. Disconnect power from the unit.
2. Connect a USB-A to USB mini-B cable between the PC and the FW port on the unit.
3. Power the unit. If updating the AT-OME-EX-TX, then make sure the receiver is powered
using the included power supply and a category cable is connected between the HDBaseT
ports of both the transmitter and receiver units.
4. The USB UPDATE folder will be displayed. If this folder is not displayed, automatically,
select the USB UPDATE drive from Windows Explorer.
NOTE: The procedure outlines the update process for the AT-OME-EX-TX.
However, the same procedure applies to the AT-OME-EX-RX. The AT-OME-EX-
TX and AT-OME-EX-RX can be updated in any order. The update process, for
each unit, can take up to ve minutes to complete.
5. Delete all les from the USB UPDATE drive, if any are present.
6. Drag-and-drop the rmware le to the drive.
7. The PWR LED indicator, on the front panel, will ash green while the unit is being updated.
Do not disconnect the USB cable during the update process. When the PWR LED stops
ashing and is solid green, the update process will be complete.
8. Disconnect the USB cable from the unit and repeat the above steps for the AT-OME-EX-RX.
Updating the Firmware
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Atlona Schalten Handbücher
Atlona
Atlona AT-RGB0802 TO AT-RGB6464 Bedienungsanleitung
Atlona
Atlona AT-UHD-CLSO-612 Bedienungsanleitung
Atlona
Atlona AT-OME-TX21-WP-E Bedienungsanleitung
Atlona
Atlona AT-HDKVM-V21 Bedienungsanleitung
Atlona
Atlona AT-PROHD44M-SR Bedienungsanleitung
Atlona
Atlona AT-LINE-EX Bedienungsanleitung
Atlona
Atlona AT-HDVS-150-TX-WP Bedienungsanleitung
Atlona
Atlona AT-HDVS-150-TX Technisches Handbuch
Atlona
Atlona AT-UHD-SW-52 Bedienungsanleitung
Atlona
Atlona AT-PROHD48M-S Bedienungsanleitung
Atlona
Atlona AT-DVI-41A Bedienungsanleitung
Atlona
Atlona SW-510W-EU-KIT Bedienungsanleitung
Atlona
Atlona AT-DVI-31 Bedienungsanleitung
Atlona
Atlona AT-HD-V12x2 Bedienungsanleitung
Atlona
Atlona AT-HDR-H2H-44MA Bedienungsanleitung
Atlona
Atlona AT-HD4-V41 Bedienungsanleitung
Atlona
Atlona AT-VGA0801 TO AT-VGA9601 Bedienungsanleitung
Atlona
Atlona AT-HDMI-31 Bedienungsanleitung
Atlona
Atlona JunoX 451 HDBT Bedienungsanleitung
Atlona
Atlona AT-CW-41 Bedienungsanleitung
