Introduction
Dante audio network interface
The ANX44 is a Dante audio network interface for installation in the XMP44 professional
modular audio system, featuring four input and four output channels. The installation
of this optional module allows the XMP44 to be integrated into any DANTE enabled AV
network and flawlessly transfer digital audio with any compatible product on the market.
The bidirectional audio exchange with the 4 SourceCon™ interface card slots allows
distribution of the audio stream from the installed modules, allowing any radio tuner,
media player, internet radio or other audio source distribution throughout your Dante
network.
A truly plug & play solution is created when linking multiple DANTE enabled devices
with each other on a standard IP network. It offers self-configuring solutions by using
DHCP configuration, while the connection can be made to any existinig 100 Mbit or 1
Gbit network infrastructure.
Bidirectional signal transmissions with a sampling frequency of 48 kHz and a bit depth of
24 bit are simultaneously possible on all in and output channels, while guaranteeing an
incredibly low latency with a maximum up to 5 ms. (depending of the network occupation).
The ANX44 comes delivered as an installation kit, including all required accessories
for integration into the XMP44 chassis. Installation shall be performed by qualified
technicians.
INSTALLATION PRECAUTIONS
The installation of the ANX44 module may only be performed by
qualified technicians.
Incorrect installation can lead to permanent damage or incorrect
functioning of the equipment.
Packaging contents
- 1x ANX44 main interface board
- Required installation accessories:
- 4 x M3 spacer (7.5 mm length)
