1. INTRODUCTION
With the SLM200 we developed a stable, safe and
reliable way to measure environmental noise levels.
This compact digital sound meter has been perfected
to achieve highly accurate measurements in a cost-
eective, tightly packed measuring instrument. We
envisioned a clever and ergonomic tool, accessible
when needed. That’s why the SLM200’s convenient
design is densely loaded with all the features of similar
bigger devices.
The SLM200 is an exceptionally versatile tool which is
convenient in a wide range of applications. Engineering,
product quality control and health monitoring are only
a handful of implementations where the SLM200 is
the appropriate tool. Applications are endless, the
SLM200 suits any environment where accurate noise
measuring is necessary.
2. WARNING
Before using this product, please read the operation
rules carefully. It includes relevant safety information
and warnings.
3. OPERATION SAFETY
This product strictly follows the requirements of
“General specication for sound level meters” in design
and production.
1. Please check the meter and the accessories before
using and beware of any damage. lf you nd the case
is damaged or the LCD shows nothing, or you consider
that the meter could not work properly anymore,
please stop using it.
2. Observe the operating instructions while measuring.
3. Do not open the meter at will or change internal
wiring, to avoid damages to the device.
4. When the LCD displays “ ”, replace the battery
timely. Remove the battery if the meter is not used
for a long time.
5. Do not store or use the meter in high temperature,
high humidity, ammable, combustible or strong
electromagnetic environments.
6. Please use a soft cloth and neutral detergent to
clean the case for maintenance. Do not use grinding
agent or solvent to avoid case corrosion and damage
to the meter.
5. DISPLAY INTERFACE
1. Maximum measurement 6. C weighted
2. Minimum measurement 7. Slow response rate
3. Data hold 8. Fast response rate
4. Low battery 9. Measurement value
5. A weighted
6. KEY FUNCTION AND SETUP
1. ON/OFF: Short press once to start up; short press
again to power o.
Note: Product’s auto power o feature can be disabled:
Press and hold “HOLD” and then press “ON/OFF” key to
enable/disable auto power o, the LCD will display
“APO OFF” to indicate the status.
2. FAST/SLOW: Sampling time: When measuring, pres-
sing this key to select between fast time of 125ms and
slow time of 1s.
USER MANUAL
MINI SOUND LEVEL METER
4. PRODUCT OVERVIEW
1. Windscreen 4. LCD Display
2. Microphone 5. Function keys
3. Meter Case
Windscreen
