Audio Technica ES964 Bedienungsanleitung

ES964

Boundary Microphone Array

User Manual

English

Safety precautions

Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure

safety, observe all warnings and cautions while using the product.

Cautions for the product

Do not subject the product to strong impact to avoid malfunction.

Do not disassemble, modify or attempt to repair the product.

Do not handle the product with wet hands to avoid electric shock or injury.

Do not store the product under direct sunlight, near heating devices or in a hot, humid or dusty place.

Do not place the product on an unstable surface to avoid injury or malfunction due to falling or the like.

Notes on use

Do not swing the microphone by holding the cable or pull on the cable forcefully. Doing so may cause disconnection

or damage.

Do not install near air conditioners or lighting fixtures, as doing so may cause malfunction.

Do not wind the cable around the rack or allow the cable to become pinched.

Install the microphone on a flat, unobstructed mounting surface. Make sure that the sound source is not below the

mounting surface.

Placing any object on a surface (such as a conference table) before its finish is fully cured may result in damage to

the finish.

Package contents

1 2

3 4 5 6

Microphone

RJ45 breakout cable × 2

Rubber isolator

Fixing nut

Table mount adapter

Table mount adapter mounting screw × 3

Part names and functions

Top

Talk switches

Switches between mute and unmute.

Microphone body

Side

Talk indicator lamp

Indicates the mute/unmute status by the color of indicator lamp that lights.

Part names and functions

Bottom

SW. FUNCTION

Sets how the talk switches operate.

Mode Operation method

TOUCH ON/OFF Each time you touch a talk switch, the microphone is turned on or off.

MOM. ON

The microphone is turned on as long as you are touching a talk

switch. The microphone is turned off when you stop touching the talk

switch.

MOM. OFF

The microphone is turned off as long as you are touching a talk

switch. The microphone is turned on when you stop touching the talk

switch.

CONTROL

Sets whether the microphone is muted/unmuted and whether the talk indicator lamp is lit by using the product or

the external control device.

Mode Operation

LOCAL

The microphone is muted/unmuted using a talk switch on the

product. The talk indicator lamp also lights in conjunction with talk

switch operation.

REMOTE

The microphone always stays on. The talk indicator lamp lights in

conjunction with the operation of the talk switches, and the operation

information is transmitted to the external control device via the

CLOSURE terminal. The external control device controls

muting/unmuting.

LED REMOTE

The microphone always stays on, and the external control device

controls muting/unmuting and lights the talk indicator lamp. Talk

switch operation information is transmitted to the external control

device via the CLOSURE terminal.

Part names and functions

LED COLOR

You can select the color in which the talk indicator lamp lights when muted/unmuted.

Connection procedure

1Connect the output terminals (RJ45 jacks) on the microphone cable to the included RJ45 breakout

cables by using commercially available STP cables.

Connect microphone output terminals A and B to RJ45 breakout cables A and B, respectively.

Microphone output terminal A

Commercially available STP cable (MIC 1 to MIC 3)

RJ45 breakout cable A

Microphone output terminal B

Commercially available STP cable (LED control / CLOSURE control)

RJ45 breakout cable B

Connection procedure

2Connect the output terminals on the RJ45 breakout cables to a device that has a microphone input

(balanced input) that is compatible with a phantom power supply.

MIC 1

MIC 2

MIC 3

LED control

CLOSURE control

ATDM series DIGITAL SMARTMIXER™

Third-party mixer

The product requires 20 to 52 V DC phantom power supply for operation.

The output connectors are Euroblock connectors with polarity as shown in the "Wiring table" (p. 8).

Wiring table

Microphone output is low impedance (Lo-Z), balanced type. Signals are output on each pair of Euroblock connectors

on the RJ45 breakout cables. Audio grounding is achieved with a shielded connection. The output of each Euroblock

connector is as shown in the pin assignment.

MIC 1 is “O” (omnidirectional) and MIC 2 is “L” (bidirectional), with both positioned at 240° horizontally. MIC 3 is “R”

(bidirectional), and is positioned at 120° horizontally. These are combined to create a directional pattern in any

desired direction.

The pin number sequence of the output terminals is as follows.

OUT A

The pin numbers and functions of the RJ45 connectors and the colors of the RJ45 breakout cables are as follows.

Connection procedure

Pin No. / Function Cable color

PIN 1 / MIC 2 L (+) Brown

PIN 2 / MIC 2 L (-) Orange

PIN 3 / MIC 3 R (+) Green

PIN 4 / MIC 1 O (-) White

PIN 5 / MIC 1 O (+) Red

PIN 6 / MIC 3 R (-) Blue

PIN 7 / GND Black

PIN 8 / GND Black

OUT B

The pin numbers and functions of the RJ45 connectors and the colors of the RJ45 breakout cables are as follows.

Pin No. / Function Cable color

PIN 1 / Blank -

PIN 2 / Blank -

PIN 3 / LED Green

PIN 4 / Blank -

PIN 5 / CLOSURE Red

PIN 6 / Blank -

PIN 7 / GND Black

PIN 8 / GND Black

Pin assignment

MIC 1

O+

O-

GND

Inhaltsverzeichnis

Andere Audio Technica Mikrofon Handbücher

Audio Technica

Audio Technica UNIPOINT U857Q Bedienungsanleitung

Audio Technica

Audio Technica unipoint U857QLU Bedienungsanleitung

Audio Technica

Audio Technica Artist Elite AE2300 Bedienungsanleitung

Audio Technica

Audio Technica AT4033 Bedienungsanleitung

Audio Technica

Audio Technica ATR Series Bedienungsanleitung

Audio Technica

Audio Technica M2 Bedienungsanleitung

Audio Technica

Audio Technica ES915H Betriebsanleitung

Audio Technica

Audio Technica ES993 Betriebsanleitung

Audio Technica

Audio Technica AT898 Bedienungsanleitung

Audio Technica

Audio Technica ES961 Betriebsanleitung

Audio Technica

Audio Technica AT2020USBi Bedienungsanleitung

Audio Technica

Audio Technica AT829cW Bedienungsanleitung

Audio Technica

Audio Technica AE3300 Bedienungsanleitung

Audio Technica

Audio Technica ATS99 Bedienungsanleitung

Audio Technica

Audio Technica AT4051a Bedienungsanleitung

Audio Technica

Audio Technica MT830R Bedienungsanleitung

Audio Technica

Audio Technica ES945 Betriebsanleitung

Audio Technica

Audio Technica ATM73a Bedienungsanleitung

Audio Technica

Audio Technica ES947C/XLR Bedienungsanleitung

Audio Technica

Audio Technica ES925H6/DS3 Bedienungsanleitung

Audio Technica

Audio Technica AT831R Bedienungsanleitung

Audio Technica

Audio Technica ATR1100 Bedienungsanleitung

Audio Technica

Audio Technica Unipoint U841A Bedienungsanleitung

Audio Technica

Audio Technica AT4047MP Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung