Audiovox VME 9120 TS Bedienungsanleitung

VME 9120 TS

Multimedia Receiver

CONTENTS

Thank you for choosing a Audiovox product. We hope you will find the instructions in this owner’s ma nual clear and easy to follow. If you take a few

minutes to look through it, you’ll learn how to use all the features of your new Audiovox VME 9120TS Mobile Multimedia Receiver for maximum

enjoyment.

Preparation 3

Installation 5

Controls and Indicators 9

Remote Control 10

Using the TFT Monitor 12

Operating Instructions 13

DVD Setup Menu 14

Tuner Operation 16

DVD/VCD Video Operation 18

DVD/CD Audio Operation 22

MP3/WMA Operation 24

Troubleshooting 27

Specifications 29

Subject to technical changes

PREPARATION

Congratulations on your purchase of the Audiovox VME 9120TS Mobile Multimedia Receiver. It’s a good idea to read all of the instructions before

beginning the installation. We recommend having your Audiovox VME 9120TS installed by a reputable installation shop.

Features

DVD

• Aspect Ratio - Full and Normal

• Fast Forward/Backward - 2X, 4X, 8X and 20X

• Play, Pause, Stop, Next Chapter and Previous Chapter CD / MP3 / WMA

• ID3 Tag Compatible

• Directory Search (MP3 / WMA Only)

• Direct Track Access via Remote Control

• Burn up to 1500 MP3 and WMA Files onto a DVD+R /RW

• Random, Repeat and Intro

• Play, Pause, Stop, Next Track and Previous Track

AM-FM-RDS

• 30 Station Presets (18 FM / 12 AM)

• Auto Stereo / Mono

• Auto Store / Preview Scan

Auxiliary Input

• Front Auxiliary Input (audio and video)

• 2.5mm to 3.5mm A/V Cable Included

• 2.5mm to RCA A/V Cable Included

Chassis

• 2.0 DIN (Import / ISO-DIN Mountable)

• Motorized Slide Down LCD Screen

• 7" TFT Active Matrix LCD w/ Anti-Glare Coating

• 336,960 Sub Pixels (1440W X 234H)

• Pixel Pitch - 0.107 X 0.370

• Screen Tilt / Angle Adjustment

• Beep Tone Confirmation (On-OFF Option)

General

• 44-Key Infrared Remote Control

• Two Composite Video Outputs for Additional Screens

• Three Preset EQ Curves

• Front, Rear and Subwoofer Line Output

• Programmable Volume Control

• Rear Camera Input (Normal and Mirror Image View)

• Touch Screen Calibration Mode

• 2VRMS Line Output - All Channels

What’s in the Box

1. Left and Right Double DIN Mounting Brackets

2. Double DIN Sleeve

3. Remote Control with Battery

4. Two Custom Cosmetic Trim Rings

5. Screen Cleaning Cloth

6. M5x6 and M3x4 Screws to Mount Radio to Brackets

7. Speaker Output Harness

8. Power Input Harness

9. 2.5mm to 3.5mm Accessory Cable

10. 2.5mm to RCA Accessory Cable

Tools and Supplies

You will need these tools and supplies to install your VME 9120TS

• Torx type, flat-head and Philips screwdrivers

• Wire cutters and strippers

• Tools to remove existing radio (screwdriver, socket wrench set or other tools)

• Electrical tape

• Crimping tool

• Volt meter/test light

• Crimp connections

• 18 gauge wire for power connections

• 16 – 18 gauge speaker wire

Subject to technical changes

WARNING! Only connect the unit to a 12-volt power supply with proper grounding.

WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions.

WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera) never use the video display function while dri-

ving the vehicle. This is a violation of federal law.

WARNING! Never disassemble or adjust the unit.

WARNING! To prevent injury from shock or fire, never expose this unit to moisture or water.

WARNING! Never use irregular discs.

WARNING! To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor.

WARNING! Using an improper fuse may cause damage to the unit and result in a fire.

WARNING! The monitor employs an automatic motorized mechanism. To prevent damage to the core mechanism,

please do not push, pull or swivel the monitor manually.

Disconnecting the Battery

To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to installation.

NOTE: If the VME 9120TS is to be installed in a car equipped with an on-board drive or navigation computer, do not

disconnect the battery cable. If the cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution during

installation to avoid causing a short circuit.

Subject to technical changes

INSTALLATION

ISO DIN Installation

This unit is designed to fit into a 2.0 DIN dashboard opening, found in many imported cars. The unit has threaded holes in

the chassis side panels which may be used with the original factory mounting brackets of some Toyota, Nissan,

Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please consult with your local car

stereo specialty shop for assistance on this type of installation.

1. Remove the existing factory radio from the dashboard or center console mounting. Save all hardware and brackets

as they will be used to mount the new radio.

2. Remove the four screws at the front of the radio that attach the mounting sleeve to the radio chassis (two at the top and two at the bottom).

Remove the Half Sleeve.

3. Remove the factory mounting brackets and hardware from the existing radio and attach them to the new radio.

CAUTION: Do not exceed M5 X 6MM screw size. Longer screws may touch and damage components inside the chassis.

4. Place the radio in front of the dashboard opening so the wiring can be brought through the dash. Follow the

wiring diagram carefully and make certain all connections are secure and insulated with wire nuts or electrical tape. After completing the wiring

connections, plug the ISO connectors into the mating sockets on the rear of the chassis. Turn the unit on to confirm operation

(vehicle ignition switch must be “on”). If the unit does not operate, re-check all wiring until the problem is corrected.

5. Mount the new radio assembly to the dashboard o center console using the reverse procedure in step 1.

CAUTION: For proper operation of the CD player, the chassis must be mounted within 30° of horizontal. Make sure the unit is mounted within this

limitation.

NOTE: It is the end-users responsibility to install and operate this unit in a manner in accordance with local, state and federal laws. The PARKING

BRAKE wire MUST BE CONNECTED as directed in the manual.

Subject to technical changes

Installation Using Mounting Sleeve

1. Install the sleeve.

a. Install adapter if necessary (optional).

b. Install sleeve into adapter or dashboard (use only the supplied screws). Do not force the sleeve into the opening or cause it to bend or bow.

c. Locate the series of bend-tabs along the top, bottom and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard ope

ning, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

Use the M5 x 6 screws (provided) to install the mounting brackets to each side of the radio using the holes indicated below.

3. Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve.

CAUTION! Be careful not to damage the car wiring.

4. Complete wiring as illustrated in the wiring diagram on page 8. Once the wiring is complete, reconnect the battery negative terminal. If there is

no ACC available, connect the ACC lead to the power supply with a switch.

Subject to technical changes

After completing the wiring connections, turn the unit on to confirm operation (ignition switch must be on). If unit does not operate, recheck all

wiring until problem is corrected. Once proper operation is achieved, turn off the ignition switch and proceed with final mounting of the chassis.

1. Connect wiring adapter to existing wiring harness.

2. Connect antenna lead.

3. Carefully slide the radio into the sleeve, making sure it is right-side-up, until it is fully seated and the spring clips lock it into place.

Using the Cosmetic Trim Ring

Two cosmetic trim rings are packaged with the VME 9120TS for installation flexibility. The VME 9120Ts will fit into most import dashes with little or

no modification to the dash board/cavity. Some US domestic vehicle dashes will accept a Double-DIN chassis, but there is usually a small gap bet-

ween the radio and dash piece after installation is complete. In this case, use the appropriate trim ring to conceal any gaps that may be present.

The 4 tabs on the trim ring will snap into four holes on top and bottom of the mounting sleeve. (Picture 6 / Page 6)

Replacing the Fuse

The fuse is located next to the wiring harness. When replacing the fuse, use a new 15A replacement fuse. Using a fuse with an improper rating

could damage the unit and cause a fire.

Subject to technical changes

Wiring Diagram

Subject to technical changes

CONTROLS AND INDICATORS

1. POWER/MUTE

Press to turn the unit on. Press and hold to turn the unit off. When on, press to silence the receiver. Press again to

resume the previous volume level.

2. SRC

Press to select playing mode (SD, AV IN, DISC, Tuner).

3. VOL–

Press to adjust the volume lower.

4. VOL+

Press to adjust the volume higher.

5. OPEN/EJECT

Press to activate the automatic mechanical system and move the TFT monitor down to reveal the CD and SD Card slots.

Press again to close the TFT.

Press and hold to view the on-screen tilt controls.

6. DIM

Press repeatedly to dim the TFT screen or return to the brightness setting specified in the Setup menu.

7. A/V AUX IN

8. IR Remote Control Receiver

9. RESET

Press to reset system settings to factory default.

10. TFT Display

11. Disc Slot

12. Disc Slot Indicator

13. EJECT Disc

14. SD Card Slot

Subject to technical changes

Remote Control

Subject to technical changes

Andere Handbücher für VME 9120 TS

Inhaltsverzeichnis

Andere Audiovox Empfänger Handbücher

Audiovox

Audiovox Xpress XM Bedienungsanleitung

Audiovox

Audiovox XM SRXM-001 Bedienungsanleitung

Audiovox

Audiovox Xpress XMH10 Bedienungsanleitung

Audiovox

Audiovox GMRS-2000 Bedienungsanleitung

Audiovox

Audiovox Phase Linear UV7 Bedienungsanleitung

Audiovox

Audiovox iHD-P01 Bedienungsanleitung

Audiovox

Audiovox SIRIUS CE1000SR Bedienungsanleitung

Audiovox

Audiovox VME 8013 - Bedienungsanleitung

Audiovox

Audiovox Sirius SRSIR-001FM Bedienungsanleitung

Audiovox

Audiovox Xpress XMB10 Bedienungsanleitung

Audiovox

Audiovox AV1510D Bedienungsanleitung

Audiovox

Audiovox SIRIUS SRSIR-001 Bedienungsanleitung

Audiovox

Audiovox XMH10 Home Cradle Bedienungsanleitung

Audiovox

Audiovox XMCK5 - Car XpressEZ Satellite Radio... Bedienungsanleitung

Audiovox

Audiovox GMRS-2000 Bedienungsanleitung

Audiovox

Audiovox HDP100 - Acoustic Research HD Powerlink Bedienungsanleitung

Audiovox

Audiovox UV 8 Bedienungsanleitung

Audiovox

Audiovox XR9 - XM Radio Tuner Bedienungsanleitung

Audiovox

Audiovox VXE 7020 NAV Bedienungsanleitung

Audiovox

Audiovox HDP100 - Acoustic Research HD Powerlink Bedienungsanleitung

Audiovox

Audiovox 128-7376 Bedienungsanleitung

Audiovox

Audiovox XMCK10AP - XM Radio Tuner Bedienungsanleitung

Audiovox

Audiovox XMRVRFM002 - Commander MT XM Radio Tuner Bedienungsanleitung

Audiovox

Audiovox SIRIUS SRSIR-001 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung