AUSTRALIAN MONITOR AMIS120P Bedienungsanleitung

120W Power Amplifier

AMIS120P

Description

The AMIS120P is a 120 watt power amplifier with outputs for 4 and 8 ohms and 70 volt line. It may

be desk or rack mounted. The AMIS120P features a flat screwdriver accessible gain control on the

rear panel. This amplifier features a status LED.

Inputs and Outputs

The AMIS120P features a balanced line level XLR input with a parallel output to feed additional

power amplifiers. The unit has industry standard 3 pin XLR microphone sockets. The AMIS120P fea-

tures 70 volt, 8 and 4 ohm isolated transformer outputs via a rear panel barrier strip.

Protection

Internal current limiting protects the amplifier from both overload and overdrive conditions. Should

the amplifier be overdriven, a current limiter will protect the unit, and in a worst case scenario the

amplifier will shut down until the problem is resolved. Once the problem is fixed (shorted speaker

line, or overdriven input), the amplifier will automatically reset and continue operation. The

AMIS120P features generous heatsinking.

Australian Monitor Installation Series amplifiers feature a protection network that provides greater

stability and performance. Our amplifiers are recognised worldwide for their

reliability and this is due to the extensive levels of current limiting which pro-

tect the amplifiers from both overload and overdrive conditions.

Power Output 120 Watts RMS

Maximum Load 40 Ohms @ 70 Volts

Power Bandwidth 60Hz - 17kHz (- 3dB)

Frequency Response 60Hz - 23kHz (- 3dB)

Total Harmonic Distortion 0.5% @ 1kHz rated power

Signal To Noise Ratio -80dB

Input Sensitivity 700mV

Outputs 70V, 4 Ohm, 8 Ohm

Controls One gain control on rear of the unit via flathead screwdriver control

Indicators Power “on” LED

Power Source 120VAC 60Hz 3 pin IEC connector; 24VDC

Power Consumption 300 Watts

Protection Current Limiter protection, plus AC and DC fuses

Dimensions/Weight 3.5" H x 19" W x 11" D (Chassis Dimensions only). 26.5lb

Rack Mounting Standard

ARCHITECTURAL AND ENGINEERING SPECIFICATIONS

The 120 watt power amplifier shall be designed to run 70 volt line audio systems. The unit shall also feature

a 4 and 8 ohm output. The amplifier may be desk or rack mounted.

The amplifier must be capable of delivering 120 watts into an 40 ohm inductive load with less than 0.5% dis-

tortion measured at 1kHz and with system hum and noise of -80dB or better. Internal current limiting shall

protect the amplifier from both overload and overdrive conditions.

The amplifier shall be an Australian Monitor Installation Series model AMIS120P.

UL APPROVED

PO Box 3126, Lynnwood, WA 98046 • Voice: 425-673-5175 • Fax: 425-673-7825

• Website: www.australianmonitor.com • Email: sales@australianmonitor.com

AUSTRALIAN MONITOR AUDIO INC.

Inhaltsverzeichnis

Andere AUSTRALIAN MONITOR Verstärker Handbücher

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS250P Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS250 Series Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS604P Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS120P Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR HA6 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS250 Series Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS120XL Series Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMD4200P Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMC+ SERIES Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS250 Series Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS60 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR ACM604P Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR ACM1202P Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR Synergy SY400 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS60 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR Synergy SY400 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMC+120P Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR KA1200 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR DCM250 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR OPAL Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR KA1200 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMIS AMC30 Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR ESP Series Bedienungsanleitung

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR AMC120 Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung