Autonics TF3 Series Bedienungsanleitung

Preface

USER MANUAL

For COMMUNICATION

Preface

2 © Copyright Reserved Autonics Co., Ltd.

Preface

Thank you for purchasing Autonics product.

Please familiarize yourself with the information contained in the Safety Precautions section

before using this product.

This user manual contains information about the product and its proper use, and should be kept

in a place where it will be easy to access.

User Manual Guide

4 © Copyright Reserved Autonics Co., Ltd.

User Manual Guide

Please familiarize yourself with the information in this manual before using the product.

This manual provides detailed information on the product's features. It does not offer any

guarantee concerning matters beyond the scope of this manual.

This manual may not be edited or reproduced in either part or whole without permission.

A user manual is not provided as part of the product package. Visit our web site

(www.autonics.com) to download a copy.

The manual's content may vary depending on changes to the product's software and other

unforeseen developments within Autonics, and is subject to change without prior notice.

Upgrade notice is provided through out homepage.

We contrived to describe this manual more easily and correctly. However, if there are any

corrections or questions, please notify us these on our homepage.

Communication Protocol

TF3 Series is accepted to Modbus RTU Protocol.

Broadcase command is not supportted.

User Manual for Communication Symbols

6 © Copyright Reserved Autonics Co., Ltd.

User Manual for Communication

Symbols

Symbol

Description

Supplementary information for a particular feature.

Failure to follow instructions can result in serious injury or death.

Failure to follow instructions can lead to a minor injury or product damage.

An example of the concerned feature's use.

※1 Annotation mark.

Safety Precuations

Following these safety precautions will ensure the safe and proper use of the product and

help prevent accidents, as well as minimizing possible hazards.

Safety precautions are categorized as Warnings and Cautions, as defined below:

Warning Failure to follow these instructions may result in serious injury or

death.

Caution Failure to follow these instructions may result in personal injury or

product damage.

Fail-safe device must be installed when using the unit with machinery that may cause

serious injury or substantial economic loss. (e.g. nuclear power control, medical

equipment, ships, vehicles, railways, aircraft, combustion apparatus, safety equipment,

crime/disaster prevention devices, etc.)

Failure to follow this instruction may result in personal injury, fire, or economic loss.

The unit must be installed on a device panel before use.

Failure to follow this instruction may result in electric shock.

Do not connect, repair, or inspect the unit while connected to a power source.

Failure to follow this instruction may result in electric shock.

Check the terminal numbers before connecting the power source.

Failure to follow this instruction may result in fire.

Do not disassemble or modify the unit. Please contact us if necessary.

Failure to follow this instruction may result in electric shock or fire.

Do not use the unit outdoors.

Failure to follow this instruction may result in shortening the life cycle of the unit, or electric

shock.

When connecting the power input and relay output cables, use AWG 12 to 28 cables.

Make sure to tighten the relay output terminal screw bolt 0.4N·m and the others

communication and power terminal screw bolt 0.5N·m. When connecting the sensor input

cables, use AWG 14 to 30 cables and make sure to tighten the terminal screw bolt 0.2N·m.

Failure to follow this instruction may result in fire due to contact failure.

Use the unit within the rated specifications.

Failure to follow this instruction may result in shortening the life cycle of the unit, or fire.

Do not use loads beyond the rated switching capacity of the relay contact.

Failure to follow this instruction may result in insulation failure, contact melt, contact failure,

relay broken, or fire.

Do not use water or oil-based detergent when cleaning the unit. Use dry cloth to clean the

unit.

Failure to follow this instruction may result in electric shock or fire.

Safety Precuations

8 © Copyright Reserved Autonics Co., Ltd.

Do not use the unit where flammable or explosive gas, humidity, direct sunlight, radiant

heat, vibration, or impact may be present.

Failure to follow this instruction may result in fire or explosion.

Keep dust and wire residue from flowing into the unit.

Failure to follow this instruction may result in fire or product damage.

The specifications and dimensions of this manual are subject to change and some

models may be discontinued without notice.

Table of Contents

Preface .......................................................................................................................... 3

User Manual Guide ........................................................................................................ 4

Communication Protocol................................................................................................ 5

User Manual for Communication Symbols..................................................................... 6

Safety Precuations......................................................................................................... 7

Table of Contents ........................................................................................................... 9

1Modbus RTU Protocol ..............................................................................10

1.1 Read Coil Status(Func01–01H) ....................................................................... 10

1.2 Read Input Status(Func02–02H) ..................................................................... 11

1.3 Read Holding Registers(Func03–03H) ............................................................ 12

1.4 Read Input Registers(Func04–04H) ................................................................ 13

1.5 Force Single Coil (Func 05–05H) .................................................................... 14

1.6 Preset Single Registers(Func06–06H) ............................................................ 15

1.7 Preset Multiple Registers(Func16–10H) .......................................................... 16

1.8 Exception Response-Error Code ..................................................................... 17

2Modbus Mapping Table ............................................................................18

2.1 Read Coil Status.(Func 01) / Force Single Coil(Func 05) [Func: 01/05, R/W:

R/W] 18

2.2 Read Input Status.(Func 02) [Func: 02, R/W: R] ............................................. 18

2.3 Read Input Register.(Func 04) [Func: 04, R/W: R] .......................................... 19

2.4 Read Holding Register(Func 03) / Preset Single Register(Func 06) / Preset

Multiple Registers(Func 16) [Func: 03/06/16, R/W: R/W]............................................. 21

2.4.1 SV setting group......................................................................................... 21

2.4.2 Parameter User Group (Parameter 0 Group) ............................................ 21

2.4.3 Parameter 1 Setting Group ........................................................................ 22

2.4.4 Parameter 2 Setting Group ........................................................................ 23

2.4.5 Parameter 3 Setting Group ........................................................................ 24

2.4.6 Parameter 4 Setting Group ........................................................................ 26

2.4.7 Parameter 5 Setting Group ........................................................................ 27

1 Modbus RTU Protocol

10 © Copyright Reserved Autonics Co., Ltd.

1Modbus RTU Protocol

1.1 Read Coil Status(Func01–01H)

Read output ON/OFF (OX reference, Coil) status in Slave device.

(1) Query(Master)

Slave Address Function

Starting Address No. of Points Error Check(CRC16)

High Low High Low Low High

1Byte 1Byte 1Byte 1Byte 1Byte 1Byte 1Byte 1Byte

(2) Response(Slave)

Slave Address Function Byte Count Data Data Data Error Check(CRC16)

Low High

1Byte 1Byte 1Byte 1Byte 1Byte 1Byte 1Byte 1Byte

The example of reading the 10 outputs status (ON: 1, OFF: 0) within Coil 000001(0000 H) to

000010(0009 H) on Slave(Address 17) from Master.

Query(Master)

Slave Address Function Starting Address No. of Points Error Check(CRC16)

High Low High Low Low High

11 H02 H00 H00 H00 H0A H## H## H

The example when Coil000008(0007 H) to 000001(0000 H) values are “ON-ON-OFF-OFF-ON-

ON-OFF-ON”, 000010(0009 H) to 000009(0008 H) values are “OFF-ON” on Slave.

Response(Slave)

Slave Address Function Byte Count Data

(000008 to 000001)

Data

(000010 to 000009)

Error Check(CRC16)

Low High

11 H 01 H02 H CD H 01 H## H## H

CRC16

Andere Handbücher für TF3 Series

Inhaltsverzeichnis

Andere Autonics Controller Handbücher

Autonics

Autonics TZN Series Bedienungsanleitung

Autonics

Autonics 1-Axis High Speed Stand-Alone Series Bedienungsanleitung

Autonics

Autonics SPR3 Series Bedienungsanleitung

Autonics

Autonics TN Series Bedienungsanleitung

Autonics

Autonics SPC1 Series Bedienungsanleitung

Autonics

Autonics TC4S Bedienungsanleitung

Autonics

Autonics TC3YT Series Bedienungsanleitung

Autonics

Autonics MD5-HF14 Series Bedienungsanleitung

Autonics

Autonics SPRM Series Bedienungsanleitung

Autonics

Autonics SFC-R Series Bedienungsanleitung

Autonics

Autonics TM2-22RB Bedienungsanleitung

Autonics

Autonics MD5-HD14 Bedienungsanleitung

Autonics

Autonics AiS Series Bedienungsanleitung

Autonics

Autonics DPU Series Bedienungsanleitung

Autonics

Autonics TC4S Bedienungsanleitung

Autonics

Autonics PA10-U Bedienungsanleitung

Autonics

Autonics TZN4S Series Bedienungsanleitung

Autonics

Autonics TM Series Bedienungsanleitung

Autonics

Autonics DPU1 Series Bedienungsanleitung

Autonics

Autonics DPU Series Bedienungsanleitung

Autonics

Autonics TF3 Series Bedienungsanleitung

Autonics

Autonics TM-XGT Bedienungsanleitung

Autonics

Autonics PMC-2HSP Series Bedienungsanleitung

Autonics

Autonics PA-12 Series Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch