Avaya S8700 Series Beilage

KT; Reviewed:

NAB 6/18/03

Solution & Interoperability Test Lab Application Notes

1 of 10

AscomS8700.doc

Application Notes for Ascom Freeset DCT1900 with

Avaya™ S8700 Media Server and Avaya™ G600 Media

Gateway - Issue 1.0

Abstract

These Application Notes describe the configuration steps required for the Ascom Freeset

DCT1900 to successfully interoperate with the Avaya™ S8700 Media Server and Avaya™

G600 Media Gateways. The Ascom Freeset DCT1900 stations were configured in Avaya™

Communication Manager as digital stations, and the Ascom Freeset DCT1900 was connected

to the digital interface cards in the Media Gateway. Features and functionality were validated

and performance testing was conducted in order to verify operation under load. Information in

these notes has been obtained through compliance testing and additional technical discussions.

Testing was conducted via the DeveloperConnection Program at the Avaya Solution and

Interoperability Test Lab.

KT; Reviewed:

NAB 6/18/03

Solution & Interoperability Test Lab Application Notes

2 of 10

AscomS8700.doc

1. Introduction

These Application Notes describe the compliance-tested configuration utilizing Avaya™

Communication Manager and Ascom Freeset DCT1900.

Freeset DCT1900 is the Personal Wireless Telephone (PWT) in-building wireless

communication system from Ascom Wireless Solutions, Inc. that interoperates with the Avaya

Communication Manager. The system provides call handover and roaming features. The Freeset

DCT 1900 consists of the following three subsystems:

1. The Radio Exchange (RE) is the interface between the Avaya™ G600 Media Gateway

and the base stations. Incoming and outgoing calls are routed via the RE. The RE is

connected to the Media Gateway via the ports of a digital line card.

2. The Base Station enables radio communications between the RE and Portable

Telephones. Each Base Station has two antennas for improved performance through

diversity selection. The Base Station modulates and demodulates a carrier with the digital

encoded information (TDMA frame to and from Portable Telephone).

3. The Ascom portable telephones (models DT620, 9p23 Medic and 9p23 Messenger)

provide the functions of a wired telephone. Each is equipped with a 3-line 12-character

dot matrix LCD display, backlit illumination keypad and display, and plastic keypad. In

addition, the 9p23 telephones include built-in vibration alert, internal antenna, panic

button, built-in hands-free loudspeaker, and mute and volume controls.

Ascom Freeset DCT1900 requires a circuit pack capable of supporting Avaya™ 8410D Digital

telephones. Although the solution was validated using a TN2224 circuit pack, a technical

analysis of the interface allows the test results to extend to the TN2181 and TN2224B circuit

packs as well. The analysis also supports these circuit packs in the following media gateways:

• Avaya G600 Media Gateway

• Avaya CMC1 Media Gateway

• Avaya CC1 Media Gateway

• Avaya MCC1 Media Gateway

Note that this list specifically excludes the Avaya™ S8300 Media Server using an Avaya™

DMM3 Digital Media Module. The S8300, and corresponding DMM3 media module, is not

supported.

As seen in Figure 1, Avaya Communication Manager runs on Avaya S8700 Media Servers in an

IP Connect configuration. Each Ascom portable telephone is provisioned in Avaya

Communication Manager as an Avaya 8410D telephone with four line appearances.

KT; Reviewed:

NAB 6/18/03

Solution & Interoperability Test Lab Application Notes

3 of 10

AscomS8700.doc

Figure 1: Avaya De ve lope rConnection Compliance TestConfiguration

for Avaya S8700 IPConnect andAscom FreesetDCT 1900

Layer 2 Switch

S8700/G600

IPConnect

IPNetwor k

* Simulated by

Call Generator

PSTN*

Layer 2 Switch

TN2224

AvayaIP

andDigital

Telephones

AscomFreesetDCT1900

DLU

Radio Exchange(RE)

Base Station (BS)

PortableTelephones(P T )

2. Equipment and Software Validated

The following equipment and software were used for the sample configuration provided:

Equipment Software

Avaya™ S8700 Media Server with multiple Avaya G600

Media Gateways

Avaya Communication

Manager 1.2

Avaya™ TN2224 Circuit Pack V7

Ascom Freeset DCT1900 Radio Exchange DLU Board Application SW: 100LR2

FPGA SW: L1_1E

Ascom Freeset DCT1900 Base Station R3A

Ascom Freeset DCT1900 DT620 Portable Telephone R3C

Ascom Freeset DCT1900 9p23 (Medic and Messenger)

Portable Telephone

R2C

Ascom Cordless System Manager R3C

KT; Reviewed:

NAB 6/18/03

Solution & Interoperability Test Lab Application Notes

4 of 10

AscomS8700.doc

3. Configure Stations on the Avaya S8700 Media Server

Each Ascom portable telephone corresponds to an Avaya 8410D Digital Telephone administered

in Communication Manager. For simplicity, one station can be initially created, and the

duplicate station command can be used to create the remaining stations. The steps to create this

initial station are described as follows:

1. Add the station by typing the command add station 25200. Configure the Type as

“8410D” and go to the second page.

add station 25200 Page 1 of 4

STATION

Extension: 25200 Lock Messages? n BCC: 0

Type: 8410D Security Code: TN: 1

Port: 02A0601 Coverage Path 1: COR: 1

Name: Coverage Path 2: COS: 1

Hunt-to Station:

STATION OPTIONS

Loss Group: 2 Personalized Ringing Pattern: 1

Data Module? n Message Lamp Ext: 25200

Speakerphone: 2-way Mute Button Enabled? y

Display Language: english

Media Complex Ext:

IP SoftPhone? n

KT; Reviewed:

NAB 6/18/03

Solution & Interoperability Test Lab Application Notes

5 of 10

AscomS8700.doc

2. Set Restrict Last Appearance to “n”. Go to the next page.

3. Configure four call appearances as shown below.

4. Save the changes for this station.

5. If needed, use the duplicate station command to copy these settings for additional

stations.

6. Plug in the Ascom Radio Exchange Unit’s RJ-45 connectors to the ports associated with

the provisioned stations.

add station 25200 Page 2 of 4

STATION

FEATURE OPTIONS

LWC Reception: spe Auto Select Any Idle Appearance? n

LWC Activation? y Coverage Msg Retrieval? y

LWC Log External Calls? n Auto Answer:

none

CDR Privacy? n Data Restriction? n

Redirect Notification? y Idle Appearance Preference? n

Per Button Ring Control? n

Bridged Call Alerting? n Restrict Last Appearance? n

Active Station Ringing: single

H.320 Conversion? n Per Station CPN - Send Calling Number?

Service Link Mode: as-needed

Multimedia Mode: basic

Display Client Redirection? n

AUDIX Name: Select Last Used Appearance? n

Coverage After Forwarding? s

Direct IP-IP Audio Connections? y

Emergency Location Ext: 25200 IP Audio Hairpinning? y

add station 25200 Page 3 of 4

STATION

SITE DATA

Room: Headset? n

Jack: Speaker? n

Cable: Mounting: d

Floor: Cord Length: 0

Building: Set Color:

ABBREVIATED DIALING

List1: List2: List3:

BUTTON ASSIGNMENTS

1: call-appr 6:

2: call-appr 7:

3: call-appr 8:

4: call-appr 9:

5: 10:

KT; Reviewed:

NAB 6/18/03

Solution & Interoperability Test Lab Application Notes

6 of 10

AscomS8700.doc

4. Configure the Ascom Portable Telephones

1. Put the handset into INIT mode by pressing the ON button and the ‘1’ and ‘4’ keys.

2. Connect the handset to the adapter connected to the PC running Cordless System Manager.

3. From the menu, select Cordless Phone -> Add Extension Numbers…

Provision the list of available extensions.

KT; Reviewed:

NAB 6/18/03

Solution & Interoperability Test Lab Application Notes

7 of 10

AscomS8700.doc

4. On the menu, select Cordless Phone -> Cable Connect

5. Select the com port that the handset programming adapter is connected to and click Connect

6. Select the desired index (usually number one).

KT; Reviewed:

NAB 6/18/03

Solution & Interoperability Test Lab Application Notes

8 of 10

AscomS8700.doc

7. Click the Add button, select an available extension, and click OK.

8. Click the Disconnect button.

9. On the handset, press the ON button to exit INIT mode. The phone will restart with the new

settings.

5. Interoperability Compliance Testing

Interoperability compliance tests included feature, functionality, and performance testing.

Feature and functionality testing examined the handsets’ ability to make and receive calls, as

well as commonly used telephony features such as conference and transfer. Feature and

functionality testing were verified using manual methods. Performance testing was conducted

using a bulk call generator and observing the call completion statistics through Avaya

Communication Manager. Due to battery life of the handsets, a six-hour interval was evaluated.

6. Support

Ascom maintains a technical staff and call center to provide technical support and training for

the products mentioned. Distributors and end customers may dial 1 877 71ASCOM, Option 3

for technical support. Ascom provides normal business hour support (8:00 AM to 5:30 PM EST)

as well as after-hour emergency support. Customers without service agreements are charged for

such services. End customers are generally encouraged to contact their distributor for technical

support.

KT; Reviewed:

NAB 6/18/03

Solution & Interoperability Test Lab Application Notes

9 of 10

AscomS8700.doc

7. Verification Steps

In order to verify that the configuration steps have been performed successfully, a step-by step

approach is recommended to isolate the problem.

1. Verify that an Avaya 8410D Digital Telephone plugged into the circuit pack behaves

properly. If it does not, the station has not been configured correctly.

2. Verify that the handset has wireless connectivity. If not, verify that the Base units are

functioning correctly by seeing if other handsets have connectivity.

3. Use the status station command in Communication Manager to verify that the station is

in the correct state.

8. Conclusion

Compliance testing has verified that the Ascom Freeset DCT1900 successfully interoperates with

the Avaya S8700 Media Server and G600 Media Gateways. The Ascom Freeset DCT1900

stations were configured in Avaya™ Communication Manager as digital stations, and the Ascom

Freeset DCT1900 was connected to the digital interface cards in the Media Gateway. Features

and functionality were validated and performance testing was conducted in order to verify

operation under load.

While this solution was validated using a TN2224 circuit pack, a technical analysis of the

interface determined that the compliance test results also extend to the TN2181 and TN2224B

circuit packs as well. The analysis also supports these circuit packs in the following media

gateways:

• Avaya G600 Media Gateway

• Avaya CMC1 Media Gateway

• Avaya CC1 Media Gateway

• Avaya MCC1 Media Gateway

Note that this list specifically excludes the Avaya™ S8300 Media Server using an Avaya™

DMM3 Digital Media Module. The S8300, and corresponding DMM3 media module, is not

supported.

KT; Reviewed:

NAB 6/18/03

Solution & Interoperability Test Lab Application Notes

10 of 10

AscomS8700.doc

Avaya and the Avaya Logo are trademarks of Avaya Inc. All trademarks identified by ® and ™

are registered trademarks or trademarks, respectively, of Avaya Inc. All other trademarks are the

property of their respective owners. The information provided in these Application Notes is

subject to change without notice. The configurations, technical data, and recommendations

provided in these Application Notes are believed to be accurate and dependable, but are

presented without express or implied warranty. Users are responsible for their application of any

products specified in these Application Notes.

Please e-mail any questions or comments pertaining to these Application Notes along with the

full title name and filename, located in the lower right corner, directly to the Avaya

DeveloperConnection Program at [email protected].

Andere Handbücher für S8700 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Avaya Server Handbücher

Avaya

Avaya Aura System Platform Bedienungsanleitung

Avaya

Avaya P133F2 Bedienungsanleitung

Avaya

Avaya 1000M Bedienungsanleitung

Avaya

Avaya Scopia XT Camera Switch Bedienungsanleitung

Avaya

Avaya S8700 Series Bedienungsanleitung

Avaya

Avaya S8700 Series Bedienungsanleitung

Avaya

Avaya CallPilot 1006r Handbuch

Avaya

Avaya S8730 Bedienungsanleitung

Avaya

Avaya Scopia Bedienungsanleitung

Avaya

Avaya Scopia Bedienungsanleitung

Avaya

Avaya CS 1000M SG Bedienungsanleitung

Avaya

Avaya S8500 Series Bedienungsanleitung

Avaya

Avaya G650 Bedienungsanleitung

Avaya

Avaya CallPilot 1005r Handbuch

Avaya

Avaya S8500 Series Montageanleitung

Avaya

Avaya 8200 Bedienungsanleitung

Avaya

Avaya Virtual Services Platform 7000 Series Bedienungsanleitung

Avaya

Avaya 8200 Bedienungsanleitung

Avaya

Avaya Aura S8800 Bedienungsanleitung

Avaya

Avaya S8500 Series Gebrauchs- und Pflegehandbuch

Avaya

Avaya S8400 Bedienungsanleitung

Avaya

Avaya CS7000 Service-Handbuch

Avaya

Avaya S8700 Series Installationsanleitung

Avaya

Avaya 1000 Series Service-Handbuch

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung