aventon PACE 500 Bedienungsanleitung
PACE 500 & PACE 500 STEP-THROUGH
OWNER’S MANUAL
(THROTTLE AFTER PEDAL)
AVENTON PACE 500 OWNER’S MANUAL
Thank you for purchasing an Aventon Pace 500 ebike! Before
riding, please take a moment to review these instructions.
Need service or support? Visit our website (www.aventon.com for
quick answers, manuals and live chat support. Or give us a call
and we’ll find you a solution.
Aventon Bikes
18457 Railroad St
Industry, CA 91748
Phone: (866) 300-3311
Email: [email protected]
Version 1.1.13 (December 13, 2019)
Latest version can be found: www.aventon.com
CONTENTS
Display / Control Specifications
Getting Started
What’s on the Display?
Using the Controls
Customizing the Display
• Function 01P Backlight Brightness
• Function 02P Unit of Measure
• Function 03P Battery Voltage
• Function 04P Wheel Size
• Function 05P Speed Limit
• Function 06P Odometer Reset
Battery and Charging
Maintenance and Service
Safety
Safe Starting & Stopping
Error Codes and Troubleshooting
Additional Troubleshooting
Battery Troubleshooting
Frequently Asked Questions
Notes
1
2
3
4
5
5
5
5
6
6
6
7
9
10
11
13
17
19
21
25
PACE 500 OWNER’S MANUAL
1
DISPLAY / CONTROL SPECIFICATIONS
• 48 Volt Power Supply
• Current Rated: 10mA
• Maximum Operating Current: 30mA
• Power O Leakage Current < 1uA
• Operating Current to Controller: 50mA
• Operating Temperature: -18º to 65ºC
• Storage Temperature: -30º to 80ºC
Display Panel
Control Pad
(Side View)
(Side View)
PACE 500 OWNER’S MANUAL 2
GETTING STARTED
The Pace 500 is operated using the control pad on the
handlebars. The control pad is located near the left-hand brake
lever.
First, tap the power button on the battery to turn on. The current
charge level will be temporarily displayed on the LEDs (4 = full, 1 =
near empty), then one green LED to show the battery is turned
on. Next, press and hold the “M” button on the handlebar controls
to turn on the display. Now, your e-bike is ready to ride. To turn
pedal assist, simply start pedaling, then tap the “U” or “D” arrows
to increase or decrease the amount of pedal assist from levels
0-5. Pedal assist will engage at speeds up to 28 MPH / 45 KPH.
The Pace 500 ebike is equipped with a throttle, which is mounted
near the rider’s left thumb, to propel the bike without pedaling. To
use the throttle, start pedaling (one pedal revolution) then apply
the throttle. Once the bike is moving on throttle power, you can
stop pedaling entirely and use your thumb to control the speed of
the bike. The throttle can propel you at speeds up to 20 MPH / 32
KPH.
The motor stops when you: stop pedaling, squeeze the brake
levers, or release the throttle. Simply start pedaling again to re-
engage the motor.
PACE 500 OWNER’S MANUAL
3
WHAT’S ON THE DISPLAY
While you are riding, you can use the display to monitor your
speed, the amount of pedal assist, battery life remaining, and
other data.
As shown below, your Pace 500 uses a LCD display screen that
looks like this:
SPEED INDICATOR
(Current / Max / Average)
5 LEVELS OF ASSIST
(0: No Assist. 5: Max Assist)
WALK MODE
(On / O)
DISTANCE INDICATOR
(Current Trip / System Mileage)
ERROR CODE INDICATOR
(In the Event of a Problem)
BACKLIGHT INDICATOR
(On / O)
BATTERY LEVEL INDICATOR
(Current / Max / Average)
VOLTAGE OUTPUT INDICATOR
(Real-Time)
PACE 500 OWNER’S MANUAL 4
USING THE CONTROLS
To turn on your bike, tap the power switch on the battery, then
press and hold the “M” button for 3 seconds. To turn o, press
and hold the “M” button for 3 seconds, then press and hold the
power button on the battery for 2 seconds. The display and
battery have an energy-saving feature, if there is no activity for 10
minutes, they will turn o automatically to preserve battery life.
Tap the “U” or “D” arrows to change the level of pedal assist.
Hold “U” and “M” for 3 seconds to switch between showing real-
time speed, average speed, and max speed.
Tap “M” to toggle between the display of the Odometer, Trip
Distance, Voltage, and Elapsed Time.
Press and hold “U” for 3 seconds to enable the backlight on the
display. Press and hold “U” again for 4 seconds to turn it o.
To enable walk mode, first come to a complete stop and stand
next to the bike. Press and hold “D” for 3 seconds. The bike will
slowly move forward at 3.5 MPH / 6 KPH as long as you hold the
“D” button. This feature is useful for pushing the bike up a hill or
walking through a crowd, where you cannot safely ride.
“Super walk mode” is an even-faster version of walk mode. To
use it, hold the down arrow to engage standard walk mode, then
press the throttle. This is useful on very steep climbs or when
towing a trailer. Use caution with both walk modes.
PACE 500 OWNER’S MANUAL
5
CUSTOMIZING THE DISPLAY
You can use the settings features of the display to customize the
Pace 500 for your use. To enter the “Settings” mode, hold the “U”
and “D” buttons at the same time for 2 seconds.
You can customize 5 out of the 6 dierent functions on the
display. Tap the “M” button to move from function to function, and
use the “U” and “D” arrows to adjust each to your preferences.
When you are finished, press and hold the “M” button to
save your changes. Note: The system will save your changes
automatically after 8 seconds.
FUNCTION 01P - BACKLIGHT BRIGHTNESS
You can control how bright you’d like the display backlight
to be. 1 being the dimmest and 3 is the brightest.
FUNCTION 02P - UNIT OF MEASURE
You can toggle between miles or kilometers, based on your
preference.
FUNCTION 03P - BATTERY VOLTAGE
This function sets the battery voltage of the system. On
the Pace 500, this function is locked at 48V to match the
battery and motor, and cannot be changed.
PACE 500 OWNER’S MANUAL 6
FUNCTION 04P - WHEEL SIZE
This function can be used to change the wheel size to
16, 18, 20, 22, 24, 26, 27.5, or 28” wheels. The Pace 500
comes stock with 27.5” wheels, which is the default and
recommended setting. Note: Selecting the incorrect
wheel size will aect the accuracy of the bike’s speed, the
odometer, and the functionality of its pedal assist.
FUNCTION 05P - SPEED LIMIT
The Pace 500 is a California Class III ebike. This
designation carries a pedal assist limit of 28 MPH (45
KPH). You can pedal faster without assist, but the motor
will stop providing assist when the speed limit is reached.
You can use the Speed Limit function to change the speed
limit based on your preferences and the law in your area.
The Speed Limit function can be set from 20-51 KPH (for
reference, that is 12.4 - 31.7 MPH) and is always set in KPH.
You should only set the Speed Limit to a value that is safe
and legal in your community. This function does not aect
the max speed on throttle, which is locked at 20 MPH (32
KPH).
PACE 500 OWNER’S MANUAL
7
BATTERY AND CHARGING
The Pace 500 uses a Lithium-Ion battery which can be charged
on or o the bike. We recommend charging the battery indoors, in
moderate temperature conditions. To charge the battery, plug the
charger into the charging port and then connect the charger to a
wall outlet. The LED indicator light will be red when charging and
will turn green when charging is complete. When finished, unplug
the the charger from the wall outlet.
Take care of the battery to ensure a long service life:
• Charge and store the battery indoors if possible. The
battery can be removed from the bicycle for this purpose.
• Avoid extreme hot and cold temperatures.
• DO NOT submerge your bike or any of the components in
water. This action will void the warranty.
To optimize the performance of the battery over time, try and use
it (discharging and charging) at least monthly. But if you won’t
be riding your Level for a long period of time, it’s best to store
the battery fully charged. After many charging and discharge
cycles, runtime and range will be reduced. Replacement batteries
are available from Aventon to extend the life of your ebike. The
lifespan of the battery is about 500 charge / discharge cycles.
When you install the battery on the Pace 500, lock it into place
with the supplied key. To unlock it for removal, use the key. Do
not ride the bicycle if the battery rattles or moves - it should be
firmly attached.
Andere Handbücher für PACE 500
1
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere aventon Roller Handbücher
aventon
aventon SINCH 2020 Bedienungsanleitung
aventon
aventon POWER SHARE CTS36ABU1 Benutzerhandbuch
aventon
aventon PACE 350 Bedienungsanleitung
aventon
aventon SINCH Bedienungsanleitung
aventon
aventon Level Bedienungsanleitung
aventon
aventon SINCH ST Bedienungsanleitung
aventon
aventon LEVEL 2020 Bedienungsanleitung
aventon
aventon SINCH Bedienungsanleitung
Beliebte Roller Handbücher anderer Marken
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Bedienungsanleitung
Carrera
Carrera impel Bedienungsanleitung
Afikim
Afikim Superlight SL-3 Bedienungsanleitung
CareCo
CareCo ZOOM Bedienungsanleitung
Douglas
Douglas Vespa G.S. Bedienungsanleitung
Gazelle
Gazelle with BOSCH System Bedienungsanleitung