Azbil F4Q Bedienungsanleitung

Thank you for purchasing your Azbil

Corporation product.

This manual contains information for

ensuring the safe and correct use of

the product.

Those designing or maintaining

equipment that uses this product

should first read and understand

this manual. This manual contains

information not only for installation,

but also for maintenance,

troubleshooting, etc. Be sure to keep it

nearby for handy reference.

(Not for use in Japan)

Digital Mass Flow Controller

Model F4Q

User’s Manual for RS-485

Communication Functions

No. CP-SP-1458E

NOTICE

Please make sure that this manual is available to the user of the product.

Unauthorized duplication of this user’s manual in part or in whole is

forbidden. The information and specifications in this manual are subject to

change without notice.

Considerable effort has been made to ensure that this manual is complete

and accurate, but if you should find an omission or error, please contact us.

In no event is Azbil Corporation liable to anyone for any indirect, special, or

consequential damages as a result of using this product.

Modbus is a trademark and the property of Schneider Electric SE, its subsidiaries and

affiliated companies.

Conventions Used in This Manual

The safety precautions explained below aim to prevent injury to you and others, and to prevent property damage.

WARNING Warnings are indicated when mishandling this product may

result in death or serious injury.

CAUTION Cautions are indicated when mishandling this product may

result in minor injury or property damage only.

In describing the product, this manual uses the icons and notations listed below.

Indicates that caution is required in handling.

The indicated action is prohibited.

Be sure to follow the indicated instructions.

Handling Precautions:

Information to be aware of when handling.

Note: Indicates information that may be useful.

: Indicates an item or page to which the user may refer.

(1) (2) (3): Steps in a sequence or parts of a figure, etc.

Safety Precautions

CAUTION

Use this product within the operating conditions (for temperature, humidity, voltage,

vibration, shock, mounting orientation, atmosphere, etc.) given in the specifications in Digital

Mass Flow Controller Model F4Q User’s Manual (CP-UM-5978JECK).

Otherwise there is a danger of device failure.

Before wiring the device, turn the power off. Otherwise there is a danger of device failure.

Wire this device correctly by using the wiring method, power, and installation method

specified in this user’s manual. Otherwise there is a danger of device failure.

Do not allow wire clippings, metal shavings, water, etc., to enter the device. There is a danger

of device failure.

If there is a risk of a power surge caused by lightning, use a surge absorber (surge protector).

Otherwise there is a danger of fire or device failure.

Make sure that the wiring is correct before turning the power on. Incorrect wiring may result

in damage or malfunction.

Do not disassemble this device. There is a danger of device failure.

Do not apply excessive force to cables or connectors when connector cables or the AC adapter

is attached.

Doing so may damage the connector or circuit board.

iii

There are four different manuals related to model F4Q. Read them as necessary for your specific requirements.

If you do not have a manual you require, please contact us or one of our dealers.

Digital Mass Flow Controller Model F4Q User’s Manual for RS-485 Communication

Functions Document No. CP-SP-1458E

This manual.

Personnel who use this device's communications functions should read this manual. The

manual gives an overview of communications, describes wiring, transmission protocols,

communications data, and communication troubleshooting, and gives communications

specifications.

Digital Mass Flow Controller Model F4Q User’s Manual

Document No. CP-SP-1461E

Personnel who are using the F4Q for the first time or who are in charge of

hardware design and/or maintenance of a control panel containing the F4Q

should read this manual thoroughly.

This manual gives an overview of the product, describes installation, wiring,

operation, functions, maintenance, and troubleshooting, and gives hardware

specifications.

User’s Manual for Smart Loader Package Model MLP-F4Q for Digital Mass

Flow Controller Model F4Q Document No. CP-SP-1457E

The user can specify and check parameters of the F4Q on a PC using the MLP-F4Q

loader. Personnel who configure the F4Q or check the settings using the loader

should read this manual.

This manual also describes the installation of the software on a PC and its

functions and operation.

Digital Mass Flow Controller Model F4Q User’s Manual

Document No. CP-UM-5978JECK

This manual is supplied with the product.

Personnel in charge of the design or manufacture of equipment that

incorporates the F4Q and personnel in charge of installation of this device should

read this manual thoroughly.

The manual covers safety precautions, installation, wiring, and main

specifications.

The Role of This Manual

· Modbus is a trademark and the property of Schneider Electric SE, its subsidiaries and affiliated companies.

Conventions Used in This Manual

Safety Precautions

The Role of This Manual

Chapter 1. Overview 1-1

1 - 1 Overview 1-1

 Features 1-1

 System configuration 1-1

Chapter 2. Wiring 2-1

2 - 1 RS-485 Connection 2-1

2 - 2 Terminal Layout of This Device 2-2

Chapter 3. Settings 3-1

3 - 1 Communication Function Settings 3-1

3 - 2 Setup Method 3-2

Chapter 4. CPL Communication 4-1

4 - 1 Communication Procedure 4-1

4 - 2 Message Structure 4-2

 Overview of a CPL Frame 4-2

 Data link layer 4-3

 Application layer 4-6

4 - 3 Description of Commands 4-7

 RS command (decimal format consecutive data read) 4-7

 RD command (hexadecimal format consecutive data read) 4-9

 WS command (decimal format consecutive data write) 4-12

 WD command (hexadecimal format consecutive data write) 4-14

4 - 4 Termination Code 4-16

4 - 5 Timing Specifications 4-17

 Timing for response messages 4-17

 RS-485 driver control timing 4-17

4 - 6 Character Code Table 4-18

Contents

Chapter 5. Modbus Communication (RTU Mode) 5-1

5 - 1 Communication Procedure 5-1

5 - 2 Message Structure 5-2

 Overview of Modbus-RTU Frame 5-2

 Silent interval 5-2

 Function code 5-2

 Check code 5-3

 Error termination code 5-4

 Conditions under which no response message is returned (no-response

conditions) 5-5

5 - 3 Description of Commands 5-6

 Function 03 (multiple data read command) 5-6

 Function 06 (one data write command) 5-8

 Function 16 (multiple data write command) 5-9

5 - 4 Timing Specifications 5-11

Chapter 6. Communication Data 6-1

6 - 1 Basic Information for Handling Communication Data 6-1

 Communication data types and formats 6-1

 Communication data storage memory 6-1

6 - 2 Communication Data Table 6-3

 Meaning of the symbols in columns R and W 6-3

 Data related to the device 6-3

 Data related to operating status 6-4

 Data related to the instantaneous flow rate setpoint 6-7

 Data related to total flow volume 6-8

 Data related to function settings 6-9

 Data related to parameter settings 6-16

Chapter 7. Device Operation by Communication Commands 7-1

Chapter 8. Troubleshooting 8-1

 Communication failure 8-1

Chapter 9. Specifications 9-1

 RS-485 specifications 9-1

1-1

Chapter 1. Overview

1 - 1 Overview

Model F4Q (hereafter also “this device” or “the slave station”) can exchange data with host devices (master stations)

such as a PC or a PLC via RS-485 communication.

 Features

• The master station transmits read and write commands to slave stations.

• Through the reading and writing of data, the user can control this device, collect

process data, and configure device settings.

• Using RS-485 communication, up to 31 slave stations (devices like this device

that are compatible with RS-485) can be connected to a master station. Station

addresses are used to communicate with specific slave stations.

• The communication program is to be developed by the user.

• The data to be read/written can be freely selected by the data address.

• CPL (Azbil Corporation’s protocol) and Modbus RTU communication protocols

are supported. The user can select either one of the protocols.

 System configuration

Slave station

(models F4Q, F4H, etc.)

Up to 31 units

*Azbil’s model NX-SVG Smart Device Gateway, etc.

RS-485 (3-wire system)

Master station (PLC, etc.)

Converter*

LAN cable

PWR

NX-SVGN

USB

DA(+)

DB(−) RS-485 CH1

RS-485

BATTERY

LINK/ACT

LAN1

FUNCTION ERROR

RUN MOD COM NST FAIL

Handling Precautions

• Do not write data by RS-485 and by the loader at the same time.

Andere Handbücher für F4Q

Inhaltsverzeichnis

Andere Azbil Controller Handbücher

Azbil

Azbil AUR450C Bedienungsanleitung

Azbil

Azbil Infilex FC Bedienungsanleitung

Azbil

Azbil FRS100 Bedienungsanleitung

Azbil

Azbil Infilex ZM WY5122 Bedienungsanleitung

Azbil

Azbil C15M Bedienungsanleitung

Azbil

Azbil Intelligent Component Series Bedienungsanleitung

Azbil

Azbil KZ03 Series Bedienungsanleitung

Azbil

Azbil BH-101G0W0000 Bedienungsanleitung

Azbil

Azbil Infilex FC Series Bedienungsanleitung

Azbil

Azbil C15 Bedienungsanleitung

Azbil

Azbil DMC10E Bedienungsanleitung

Azbil

Azbil SLPC1F Bedienungsanleitung

Azbil

Azbil AUR890 Series Bedienungsanleitung

Azbil

Azbil Infilex VC Bedienungsanleitung

Azbil

Azbil Micro Flow MQV9020 Bedienungsanleitung

Azbil

Azbil MY8045A Bedienungsanleitung

Azbil

Azbil Infilex ZM WY5322 Bedienungsanleitung

Azbil

Azbil F4Q Bedienungsanleitung

Azbil

Azbil Micro Flow MQV9005 Bedienungsanleitung

Azbil

Azbil C15 Bedienungsanleitung

Azbil

Azbil Infilex VC Bedienungsanleitung

Azbil

Azbil BC-R25 Series Bedienungsanleitung

Azbil

Azbil AUR890 Series Bedienungsanleitung

Azbil

Azbil Azbil MIZCON Plus Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung