Azbil SLP-F7M Bedienungsanleitung

Thank you for purchasing this Azbil

Corporation product. This manual contains

information for ensuring the correct use of

the smart loader package.

Those designing, configuring, or

maintaining equipment that uses this

product should first read and understand

this manual. It provides necessary

information not only for initial setup,

but also for changing of settings,

troubleshooting, etc. Be sure to keep the

manual nearby for handy reference.

No. CP-SP-1423E

User’s Manual

for

Smart Loader Package

Model SLP-F7M

for

Micro Flow Rate Liquid Flow Meter

Model F7M

NOTICE

Be sure that the user receives this manual before the product is used.

Copying or duplicating this user’s manual in part or in whole is forbidden.

The information and specifications in this manual are subject to change

without notice.

Considerable effort has been made to ensure that this manual is free from

inaccuracies and omissions. If you should find an error or omission, please

contact the azbil Group.

In no event is Azbil Corporation liable to anyone for any indirect, special or

consequential damages as a result of using this product.

Conventions Used in This Manual

 The safety precautions explained in the following section aim to prevent injury to the operator and others, and to

prevent property damage.

WARNING Warnings are indicated when mishandling this

product might result in death or serious injury.

CAUTION Cautions are indicated when mishandling this

product might result in minor injury to the user, or

only physical damage to the product.

 In describing the product, this manual uses the icons and conventions listed below.

Handling Precautions:

Handling Precautions indicate items that the user should pay attention to when handling

the product.

Note:Notes indicate information that might benefit the user.

:This indicates the item or page that the user is requested to refer to.

(1) (2) (3): Numbers within parentheses indicate steps in a sequence or parts of an explanation.

[OK] button: Indicates a selectable button on a personal computer screen.

[File]: Indicates messages and menus displayed on the personal computer.

[File] →

[Initialization]:

Indicates menu selection on a personal computer.

>> : Indicates the result of an operation, details displayed on the personal computer or other

devices, or the state of the device after operation.

[Ctrl] key: Indicates keys on the keyboard.

[Ctrl]+[A] key: Indicates the operation of pressing the [A]key on the keyboard while the [Ctrl]key is

pressed.

Safety Precautions

CAUTION

To use loader communications, remove the cable from the F7M waterproof connector and

connect it to the adapter for loader communication cable. When handling the cable, make

sure that the electrodes of the connector are free from water drops and dust. Otherwise, a

failure or abnormal output might result. Also, be sure to turn off the F7M before removing

or connecting the connector. Otherwise, the F7M or the adapter for loader communication

cable may fail, and the power supply for the equipment may fail or catch fire.

The adapter for loader communication cable is not water resistant. Water drops or dust

entering inside or accumulating around the electrodes may damage the F7M or the adapter ,

or may cause external devices to catch fire or fail.

Do not apply excessive force to the plug of the USB loader cable when it is connected to the

adapter for loader communication cable. Doing so might damage the plug or the adapter.

After using loader communications, remove the cable for the F7M waterproof connector from

the adapter for loader communication cable, and insert it all the way into the waterproof

connector. If the cable is not inserted properly, the device's water resistance will be impaired,

the F7M or connected equipment may fail, and the connected equipment may catch fire.

iii

The Role of This Manual

A total of 3 different manuals are available for Model SLP-F7M. Read them as necessary for your specific

requirements. If a manual you require is not available, contact the azbil Group or its dealer.

User’s Manual for Smart Loader Package Model SLP-F7M for Micro Flow Rate

Liquid Flow Meter Model F7M

Manual No. CP-SP-1423E

This manual.

The user can specify and check parameters of Model F7M on a PC using Model SLP-F7M

smart loader package.

Personnel in charge of the design or manufacture of equipment that incorporates

Model F7M should read this manual thoroughly.

This manual describes the installation of the software on a PC, the method for

connecting the loader to Model F7M, various functions and operations of Model SLP-

F7M, and procedures for configuring Model F7M.

Micro Flow Rate Liquid Flow Meter Model F7M User's Manual

Manual No. CP-SP-1421E

This manual describes the hardware and all the functions of Model F7M.

Personnel in charge of the design, manufacturing, operation, or maintenance of

equipment that incorporates Model F7M should read this manual thoroughly.

This manual covers installation, connections for wiring, all functions

and operating procedures of Model F7M, troubleshooting, and detailed

specifications.

Micro Flow Rate Liquid Flow Meter Model F7M9010/9030/9050 User’s Manual

Manual No. CP-UM-5922JE

This manual is supplied with the product.

Personnel in charge of the design or manufacture of equipment that

incorporates Model F7M and personnel in charge of installation of this device

should read this manual thoroughly.

The manual covers safety precautions, installation, wiring, and main

specifications.

Contents

Conventions Used in This Manual

Safety Precautions

The Role of This Manual

Chapter 1. INTRODUCTION 1-1

1 - 1 Overview 1-1

 Features of the loader 1-1

 Applicable versions 1-1

1 - 2 System Requirements 1-2

 System Environment 1-2

 Hardware Configuration 1-3

1 - 3 Installation 1-5

 Installing the Loader 1-5

 Installing the USB Loader Cable Device Driver 1-8

 Installing the device driver 1-8

 If the USB loader cable device driver cannot be installed 1-12

 Checking and Installing Microsoft .NET Framework 1-14

1 - 4 Uninstallation 1-15

 Uninstalling the Loader 1-15

 Uninstalling the device driver 1-15

Chapter 2. STARTING AND EXITING THE LOADER 2-1

 Starting the loader 2-1

 Exiting the loader 2-2

 Checking the communication port number 2-2

Chapter 3. HOW TO USE THE LOADER 3-1

3 - 1 Overview 3-1

 Overview of functions 3-1

 Components of the screen 3-1

 Loader functions 3-2

3 - 2 Connecting the Loader to the Device 3-3

 Procedures for device connection 3-3

3 - 3 Checking and Changing Parameters 3-6

 Creating a parameter file without connecting the loader to the device 3-6

 Checking parameters of the connected device 3-8

 Writing parameters to the device 3-10

 Saving parameters to a file 3-11

 Checking saved parameters 3-11

3 - 4 List of Parameters 3-13

 [Device info.] tab 3-13

 [Parameters] tab 3-14

3 - 5 Checking Measured Values and Status 3-15

 Displaying measured values and status of the device 3-15

3 - 6 Immediate Writing of Parameters 3-16

 How to write monitoring parameters to the device immediately 3-16

3 - 7 List of Monitoring Parameters 3-18

 [Monitor] tab 3-18

3 - 8 Operating the Device 3-20

 Adjusting the zero point 3-20

Chapter 4. TROUBLESHOOTING 4-1

 Types of abnormal status 4-1

 Abnormal status and corrective actions 4-1

 Error messages and corrective actions 4-4

 Other troubleshooting 4-7

-MEMO-

1-1

Chapter 1. INTRODUCTION

1 - 1 Overview

The SLP-F7M Smart Loader Package (hereafter “the loader”) is a simplified engineering tool for the F7M Micro Flow

Rate Liquid Flow Meter (“the device”). The user can configure various settings of the device and monitor the flow

rate and the operational status.

The loader runs on Windows 10 (32-bit and 64-bit) English version PCs. This user’s manual covers SLP-F7M ver.

2.0.0 and later. If an older version is being used, please download the latest loader from the Azbil Corporation

website.

 Features of the loader

Functions Description

Configuration Various settings can be read from the device, checked or edited,

and written to the device.

In addition, parameter files can be created when the loader is not

connected to the device.

Monitoring The operational status of the device and alarms can be checked.

The settings for parameters that are shown with the [Write] button

can be written to the device immediately during monitoring.

Device operation The zero point of the device can be adjusted.

File functions Various settings and monitored data can be saved to a file.

Saved files can be opened to check the data.

 Applicable versions

Some combinations of loader version and F7M ID code are not possible. Be sure to

check the version of the loader and the F7M.*1

Loader version

Earlier than 2.0.0 2.0.0 or later

ID code Ver. is not printed  

Ver. b or later ×*2 

*1. The ID code is printed on the label on the back of the device.

Ver. b

For ver. b and later,

the code is printed as “Ver. _.”

*2. Please download the latest version of the loader from the following website.

https://www.azbil.com/products/factory/factory-product/flowmeter/rate-liquid/

f7m/software/index.html

1-2

Chapter 1. INTRODUCTION

1 - 2 System Requirements

The following system environment is required for use of the loader.

 System Environment

Item Description

PC Compatible equipment Windows PC with an Intel CPU

Recommended: Core i3–i7, 1.5 GHz or more. Minimum: 1 GHz

Operating system*1*2Windows10 (64-bit and 32-bit English versions)

Memory Recommended: 4 GB or more. Minimum: 2 GB

Hard disk Recommended free space: 20 GB or more. Minimum: 10 GB or more

Display Recommended: 1366 × 768 dot or more, 32-bit color or more

Pointing device A mouse or an equivalent device compatible with Windows.

USB port 1 port

Other hardware Adapter for loader

communication cable

Adapter for loader communication cable (azbil brand, model No.

F9Y7A1)

USB loader cable USB loader cable (azbil brand, model No. 81441177-001)*3

Cable for waterproof connector Cable (azbil brand, model No. F9Y7H_1)

Software Microsoft .NET Framework 4.6

If this software is not installed on the PC, download it from the Microsoft website*4and install it.

USB loader cable device driver

Install the driver using its installation software, which is different from the installer for the loader.

Adobe Acrobat Reader XI or later version

This software is necessary for viewing PDF user's manuals. If the software is not installed on the PC,

download it from the Adobe's website and install it.

*1. The performance of the loader cannot be guaranteed if it is used on other operating systems.

*2. Specify “Smaller – 100%”(default) as the font size on Windows. Otherwise, loader windows may not be displayed

properly.

*3. Use Rev. 05 or later version of the USB loader cable.

*4. English versionWindows

https://www.microsoft.com/en-US/download/details.aspx?id=48130 (as of 3/26/2019)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Azbil Messgerät Handbücher

Azbil

Azbil CML 050 Bedienungsanleitung

Azbil

Azbil mF MCF Bedienungsanleitung

Azbil

Azbil NWA300 Bedienungsanleitung

Azbil

Azbil mF MVF Series Bedienungsanleitung

Azbil

Azbil MCW400A100 Bedienungsanleitung

Azbil

Azbil SR Series Bedienungsanleitung

Azbil

Azbil MagneW Neo PLUS Bedienungsanleitung

Azbil

Azbil 700 series Bedienungsanleitung

Azbil

Azbil AUR355 Bedienungsanleitung

Azbil

Azbil MagneW FLEX+ Bedienungsanleitung

Azbil

Azbil MCB10A Bedienungsanleitung

Azbil

Azbil mF CMG Series Bedienungsanleitung

Azbil

Azbil MVF Series Bedienungsanleitung

Azbil

Azbil MagneW 3000 Bedienungsanleitung

Azbil

Azbil MagneW FLEX+ Bedienungsanleitung

Azbil

Azbil MCF0080 Bedienungsanleitung

Azbil

Azbil SPG Series Bedienungsanleitung

Azbil

Azbil MCF Series Bedienungsanleitung

Azbil

Azbil MVC10A Bedienungsanleitung

Azbil

Azbil Micro Flow CMS9500 Bedienungsanleitung

Azbil

Azbil MagneW Plus+ Series Bedienungsanleitung

Azbil

Azbil AUR355 Gebrauchs- und Pflegehandbuch

Azbil

Azbil ACTIVAL FVY5137J Bedienungsanleitung

Azbil

Azbil MagneW Two-wire PLUS+ MTG15A Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung