Page 6 of 28 BACTcontrol –Software Manual –V0.1.15 microLAN b.v.
2.2 COPYRIGHT
This manual and all containing information and figures are copyrighted. All rights
(publishing, reproduction, printing, translating, storage) are reserved by microLAN b.v.
Each reproduction or utilization outside the permitted limits of the copyright law are not
allowed without previous written consent of microLAN b.v.
The reproduction of products names, registered trade names, designation of goods
etc. in this manual does not imply that these names can be used by everyone, often
these are registered trademarks, even if they are not marked as such.
2.3 WARRANTY
microLAN B.V. warrants each Model BACTcontrol and its optional equipment against
defects in materials and workmanship under normal use and service for a period of
one (1) year. Equipment installed by microLAN is warranted from the installation date;
all other equipment is warranted from the ship date. If purchaser schedules or delays
installation more than 90 days after delivery, then the warranty period starts on the
91st day from date of shipment. This warranty extends only to the original purchaser.
microLAN will, at its option, repair or replace equipment that proves to be defective
during the warranty period, provided the equipment is returned to microLAN at the
expense of the purchaser. Parts, labour, and return shipment to the customer shall be
at the expense of microLAN. Travel costs shall be at the cost of the purchaser.
Software and firmware designed by microLAN for use with an external PC will execute
its programming instructions when properly installed on that PC. microLAN does not
warrant that the operation of the PC, software, or firmware will be uninterrupted or
error-free.
Consumables and parts are warranted for 30 days (parts only) and are not available
for coverage under extended warranties or service contracts.
This warranty shall not apply to defects originating from:
Improper maintenance or operation by purchaser.
Purchaser-supplied accessories or consumables.
Modification or misuse by purchaser.
Operation outside of the environmental and electrical product specifications.
Improper or inadequate site preparation.
Purchaser-induced contamination or leaks.
