Baumalight WLWB44 Bedienungsanleitung
WB44 STUMP GRINDER
OPERATOR’S MANUAL
Issue Date: Oct 2020
1. INTRODUCTION ................................................................................................................................ 1
1.1 Overview..................................................................................................................................... 1
1.2 Intended Use And Foreseeable Misuse ................................................................................... 1
2. COMPONENTS .................................................................................................................................. 2
3. SAFETY............................................................................................................................................... 3
3.1 Safety Alert Symbol And Signal Words................................................................................... 3
3.2 Operational Hazards.................................................................................................................. 3
Prepare for Emergencies ........................................................................................................... 4
Replace Safety Signs ................................................................................................................. 4
Lower Operating Speed ............................................................................................................. 4
Do Not Allow Riders ................................................................................................................... 5
Prevent Rollover ......................................................................................................................... 5
Avoid Powerlines & Underground Utilities .............................................................................. 5
3.3 Maintenance Hazards................................................................................................................ 6
3.4 Safety Signs ................................................................................................................................ 7
4. OPERATION ..................................................................................................................................... 10
4.1 Pre-Operation Check List ........................................................................................................ 10
4.2 Carbide Teeth Break In............................................................................................................. 10
4.3 Operation................................................................................................................................... 10
4.4 Grinding A Stump ......................................................................................................................11
4.5 Storage ...................................................................................................................................... 13
5 SERVICE AND MAINTENANCE...................................................................................................... 14
5.1 Maintenance Intervals .............................................................................................................. 14
5.2 Inspections................................................................................................................................ 14
5.3 Throttle Inspection ................................................................................................................... 14
5.4 Clutch Inspection ..................................................................................................................... 15
5.5 Rotate Cutting Teeth................................................................................................................. 16
5.6 Replace Cutting Teeth .............................................................................................................. 16
5.7 Replace Tooth Holder............................................................................................................... 17
5.8 Lubrication - Every 30 Hours................................................................................................... 17
5.9 Check Belt - Every 100 Hours.................................................................................................. 18
6. TROUBLESHOOTING ..................................................................................................................... 19
7. WARRANTY...................................................................................................................................... 20
TABLE OF CONTENTS
ii
1. INTRODUCTION
Congratulations on your choice of a Baumalight
Stump Grinder to complement your stump grinding
operation. This equipment has been designed and
manufactured to meet the needs of a discriminating
buyer for efcient grinding of stumps.
Safe, efcient and trouble free operation of your
Stump Grinder requires that you and anyone
else who will be operating or maintaining the
Stump Grinder, read and understand the Safety,
Operation, Maintenance and Troubleshooting
information contained within the Operator’s
Manual.
This manual covers the Baumalight WB44 Stump
Grinder. Use the Table of Contents as a guide to
locate required information.
Keep this manual handy for frequent reference
and to pass on to new operators or owners. Call
your Baumalight dealer, distributor or the factory
if you need assistance, information or additional
copies of the manuals.
Modications may compromise safe operation of
machine, subject users to serious injury or death and
may void any remaining warranty.
This operator’s manual does not replace, nor does its
use discharge the operator from observing all safety
codes or operating limitations as well as any applicable
federal, state, provincial or local regulations.
There are three different types of labeling on this
machine: safety, informative and product labels.
Safety Labels are pictorial with a yellow
background and generally 2 panel. Top panel
indicates the potential hazard and the bottom
panel indicates how to avoid the hazard.
Informative Labels are generally pictorial, have
a white background and can vary to the number
of panels. The label will illustrate the function
of a feature and is accompanied by detailed
1.1 Overview
The stump grinder is designed to be used by an
experienced operator. Operator must be trained
in the safe operation and hazards related to using
the stump grinder, and the safe use of the grinder
for the intended purpose. Operators will require
personal protective equipment to reduce the risk
from some hazards that cannot be completely
eliminated or controlled by the design of the
grinder.
Care is required to ensure that the stump grinder
will not come across metallic objects, stones or
other materials.
Stump grinders are not designed for use in
hazardous atmospheres where there is a risk
of re or explosion due to ammable gases or
vapors. Use in hazardous, explosive atmospheres
is prohibited. Serious injury or death of the operator
or bystanders may be caused if grinder is misused.
1.2 Intended Use And Foreseeable
Misuse
instructions in the owners manual, with the label
illustrated along side.
Product Labels contain product information such
as model number or serial number.
1
2. COMPONENTS
I
K
JH
H
A
B
C
D
E
F
G
A. Rotor
B. Debris Guard
C. Engine
D. Safety Bar
E. Operator Station Handle
F. Wheel Lock
G. Belt Guard
H. Lift Handles
I. Wheel Lock Lever
J. Handle Height Lock
K. Engine Stop Button
2
3. SAFETY
You must read, understand and follow the
instructions given by the operating unit
manufacturers, as well as the instructions in this
manual.
The safety information in this manual is denoted
by the safety alert symbol:
^
This symbol means ATTENTION! BECOME
ALERT! YOUR SAFETY IS INVOLVED!
The level of risk is indicated by the following signal
words:
^^ DANGER
DANGER - Indicates a hazardous
situation, which, if not avoided, WILL
result in death or serious injury.
^ WARNING
WARNING - Indicates a hazardous
situation, which, if not avoided, could
result in death or serious injury.
^ CAUTION
CAUTION - Indicates a hazardous
situation, which, if not avoided, could
result in minor or moderate injury.
NOTICE
NOTICE - Indicates a situation that could
result in damage to the equipment or
other property.
3.1 Safety Alert Symbol And Signal
Words
3.2 Operational Hazards
^ WARNING
Prevent death or serious injury.
Read and understand this manual before
operating stump grinder.
Keep clear of moving components.
Stop engine before performing
inspections or maintenance.
Never allow anyone near the stump
grinder during operation.
Travel at a safe speed.
^ WARNING
Prevent death or serious injury from
moving parts.
Moving parts can crush and dismember.
Do not operate without guards and
shields in place.
Disconnect and lockout power source
before adjusting or servicing.
^ WARNING
Safely operate equipment.
Allow only properly trained and qualied
personnel to operate this equipment.
3
Keep your equipment in proper working condition.
Know the regulations and laws that apply to you
and your industry. This manual is not to replace
any regulations or laws. Additional information
may be found at: www.asae.org or www.osha.gov.
If you do not understand any part of this manual,
contact Baumalight at 866-820-7603.
Prepare for Emergencies
• Be prepared in case of emergencies.
• Keep a re extinguisher and rst aid kit close
to the machine.
• Keep emergency phone numbers close to your
phone.
• Know your address so emergency services
can locate you if an emergency arises.
Replace Safety Signs
• Replace missing or damaged safety signs.
• Safety signs are identied in Section 3.4 of this
manual.
• Replacement safety signs are available from
your Baumalight dealer.
Lower Operating Speed
• Keep rotor low and move at slow speeds on
rough or uneven terrain.
^ WARNING
Use stump grinder only for the designed
applications.
Any other use may result in personal
injury, damage to equipment and may
void the warranty.
^ WARNING
Prevent serious injury or death.
Engine exhaust contains carbon
monoxide. Carbon monoxide is an
odorless gas that can cause death.
Avoid any areas or actions that expose
you or others to carbon monoxide.
Never refuel a running engine or refuel
near ignition sources.
^ WARNING
Protect from ying debris.
Wear proper safety glasses, goggles,
or a face shield to protect from ying
debris.
Carefully read all safety messages in this manual
and on equipment safety signs. Keep safety signs
in good condition and replace missing or damaged
safety signs.
New equipment components and repair parts must
include the current safety decal.
Learn how to properly operate equipment.
NEVER operate or work around this equipment
without proper instruction, while fatigued or under
the inuence of alcohol, prescription or non-
prescription medication or if feeling ill.
4
Do Not Allow Riders
• NEVER lift or carry anyone on stump grinder.
• NEVER use stump grinder as a work platform.
• NEVER allow passengers on stump grinder.
Prevent Rollover
The equipment may rollover, resulting in death or
serious injury. To help prevent rollover:
• Travel at a slow speed.
• Avoid sharp turns & sudden movement on
slopes.
• Travel with rotor close to the ground.
• Avoid holes, ditches and other obstructions
which may cause equipment to rollover.
• Use caution when operating on slopes and do
not operate on excessively steep slopes.
Avoid Powerlines & Underground
Utilities
^ DANGER
Prevent electrocution.
Death or serious injury can result if
equipment comes near or contacts
power lines.
Electrocution can occur without direct
contact.
Have local utilities locate and mark under ground
wires, cables, pipelines and other hazards before
grinding.
Hazards From Modifying Equipment
Do not make any alterations to your stump grinder.
Altering may cause your equipment to be unsafe
and may void the manufacturers’ warranty.
Avoid Wood Dust Inhalation
^ WARNING
Wear an approved respirator (N95 Type
as a minimum).
Follow local, state and federal
regulations.
The health effects from exposure to wood dust
are due to chemicals in the wood or chemical
substances in the wood created by bacteria, fungi,
or molds.
Avoid Loud Noise
^ WARNING
Prolonged exposure to loud noise can
cause impairment or loss of hearing.
Wear a suitable hearing protective
device.
5
3.3 Maintenance Hazards
Before servicing, park machine on a rm and
level surface, set parking brake and place a “Do
Not Operate” tag on engine controls. Read and
understand this manual. If you do not understand
any part of the manual, contact Baumalight at 866-
820-7603.
Always wear face and/or eye protection, safety
shoes, and other protective equipment appropriate
for the job.
Do not make unauthorized modications. Contact
Baumalight at 866-820-7603 before you weld, cut/
drill holes, or make any other modications.
Always use Baumalight replacement parts.
^ WARNING
Moving parts can crush and cut.
Keep clear of moving components.
^ WARNING
Crushing and severing hazard.
Before performing inspections, service
or maintenance:
• Park machine on rm, level surface.
• Engage wheel lock.
• Turn engine off.
^ WARNING
Entanglement hazard.
Keep clear of moving components.
Wear proper protective equipment
appropriate for the job.
6
3.4 Safety Signs
^ WARNING
To protect you and others against death
or serious injury, all labels shown must
be on stump grinder and must be legible.
If any of these labels are missing or
cannot be read, contact your dealer for
replacement labels.
The two and four panel safety decals are pictorial
and have a yellow background. The panel with a
triangle indicates the potential hazard. The panel
without a triangle indicates how to avoid the
hazard.
If any of the decals are missing, are damaged, or
if you do not understand the decal, please contact
your dealer.
7
B
C
D
A
E
D
8
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Baumalight Schleifer Handbücher
Baumalight
Baumalight S40 Bedienungsanleitung
Baumalight
Baumalight STUMP BLASTER S24 Bedienungsanleitung
Baumalight
Baumalight STUMP BLASTER S24 Bedienungsanleitung
Baumalight
Baumalight S16 Bedienungsanleitung
Baumalight
Baumalight GXM350 Bedienungsanleitung
Baumalight
Baumalight S14 Bedienungsanleitung
Baumalight
Baumalight STUMP BLASTER 3P34 Bedienungsanleitung
Baumalight
Baumalight WB44 Bedienungsanleitung
Baumalight
Baumalight HGW30 Bedienungsanleitung
Baumalight
Baumalight STUMP BLASTER 3P24 Bedienungsanleitung
