Baxi Fires Division 941 Montageanleitung

5118782/02

Model941

INSET LIVE FUEL EFFECT GAS FIRE

Fitted with one of the following fascia.

Anthem, Blenheim, Bolero,

Camden, Minima, Prelude, Seattle,

Sonnet, Victorianor

Westminsterfascia

(GC No. 32-811-21)

We trust that this guide gives

sufficient details to enable this

appliance to be installed and

maintained satisfactorily. However, if

further information is required, our

Baxi Fires Division Technical

Helpline will be pleased to help.

Telephone 08706 061 065 (National

call rates apply in the United

Kingdom).

In the Republic of Ireland

Telephone 0044 8706 061 065.

THIS APPLIANCE IS FOR USE WITH

NATURAL GAS (G20).

WHEN CONVERTED USING

CONVERSION KIT NO. 0595211

THIS

APPLIANCE IS FOR USE WITH

PROPANE GAS (G31).

THIS APPLIANCE IS SUITABLE ONLY

FOR INSTALLATION IN THE UNITED

KINGDOM (GB) AND THE REPUBLIC

OF IRELAND (IE).

INSTALLER: Please leave this guide with the

owner

INSTALLER GUIDE

(including photocopying), stored in any medium by electronic means (including in any

retrieval system or database) or transmitted, in any form or by any means, whether

electronic, mechanical, recording or otherwise, without the prior written permission of

the copyright owner.

Applications for the copyright owner's permission to reproduce any part of this

publication should be made, giving details of the proposed use, to the following address:

The Company Secretary, Baxi Heating UK Limited, Pentagon House, Sir Frank Whittle

Road, Derby, DE21 4XA.

Warning: Any person who does any unauthorised act in relation to a copyright work

may be liable to criminal prosecution and civil claims for damages.

Baxi Fires Division, Erdington, Birmingham B24 9QP

www.firesandstoves.co.uk

Because our policy is one of constant development and improvement, details may vary slightly from those

given in this publication

Page 2

INSTALLER GUIDE

Page 3

INSTALLER GUIDE

Safety First.

Baxi Fires Division fires are CE Approved and designed to meet the appropriate British

Standards and Safety Marks.

Quality and Excellence.

All Baxi Fires Division fires are manufactured to the highest standards of quality and

excellence and are manufactured under a BS EN ISO 9001 quality system accepted by

the British Standards Institute.

The Highest Standards

Baxi Fires Division is a member of the Society of British Gas Industries which works to

ensure high standards of safety, quality and performance.

Careful Installation

Baxi Fires Division is a CORGI registered company. All our gas fires must be

installed by a competent CORGI Registered Installer in accordance

with our Installer Guide and should not be fitted directly on to a

carpet or floor of combustible material.

Page 4

INSTALLER GUIDE

CONTENTS

Section Heading Page

1. SAFETY 5

2. APPLIANCE DATA 6

3. GENERAL INSTALLATION REQUIREMENTS 7

4. PACK CONTENTS 15

5. FIREPLACE CHECK 19

6. IGNITION CHECK 21

7. GAS SUPPLY CONNECTION 21

8. PREPARING APPLIANCE FOR INSTALLATION 22

9. HOTBOX INSTALLATION 24

9.1 Method 1 - Front fixing to fireplace surround. 24

9.2 Method 2 - Cable retention and floor fixing. 24

9.3 Sealing floor front 26

10. BURNER & SUPPLY PIPE INSTALLATION 27

10.1 Burner and supply pipe installation. 27

10.2 Preliminary burner checks. 27

10.3 Inlet pressure check. 28

11. CERAMIC WALLS INSTALLATION 28

12. FITTING THE FASCIA 29

13. FITTING THE CERAMIC FUEL EFFECT 31

14. FITTING THE FIREFRONT 31

15. FULL OPERATING CHECKS 33

15.1 Check the control settings. 33

15.2 Check for spillage. 34

15.3 Flame supervision and spillage monitoring system. 34

16. FINAL REVIEW 35

17. SERVICING & PARTS REPLACEMENT 36

17.1 Checking the aeration setting of the burner. 37

17.2 To remove the Westminster and Bolero fascia. 37

17.3 To remove the Victorian fascia. 37

17.4 To remove the Anthem, Blenheim, Camden, Minima and Sonnet fascia. 38

17.5 To remove the complete burner unit. 38

17.6 To remove the pilot unit. 38

17.7 To remove the gas valve. 39

17.8 To remove the piezo generator. 39

17.9 To grease the control tap. 39

17.10 To replace the burner. 40

17.11 To remove the main burner injector. 40

17.12 To remove the appliance from the fireplace. 40

1. SAFETY

Installer

Before continuing any further with the installation of this appliance please read the

following guide to manual handling:

!The lifting weight of this appliance is as below:

Model Heat Engine (kg) Fascia / Firefront (kg)

Combined Weight (kg)

Anthem 4.9 2.01 6.91

Blenheim 4.9 3.86 8.76

Bolero 4.9 13.35 18.25

Camden 4.9 0.71 5.61

Minima 4.9 1.16 6.06

Prelude 4.9 3.75 8.74

Seattle 4.9 0.71 5.61

Sonnet 4.9 3.86 8.76

Victorian 4.9 5.23 10.13

Westminster 4.9 9.56 14.46

!One person should be sufficient to lift the fire. If for any reason this weight is

considered too heavy then obtain assistance.

!When lifting always keep your back straight. Bend your legs and not your back.

!Avoid twisting at the waist. It is better to reposition your feet.

!Avoid upper body/top heavy bending. Do not lean forward or sideways whilst

handling the fire.

!Always grip with the palm of the hand. Do not use the tips of fingers for support.

!Always keep the fire as close to the body as possible. This will minimise the

cantilever action.

!Use gloves to provide additional grip.

!Always use assistance if required.

Page 5

INSTALLER GUIDE

2. APPLIANCE DATA

The efficiency of this appliance has been measured as specified in BS 7977 - 1 and the

result is as below :

Model

Efficiency % (Gross)

941 55

941 when converted to LPG. 53

The gross calorific value of the fuel has been used for this efficiency calculation. The

test data from which it has been calculated has been certified by Advantica Certification

services (0087). The efficiency value may be used in the UK Government's Standard

Assessment Procedure (SAP) for energy rating of dwellings.

The convertion of net efficiency to gross was achieved by

multiplying the net efficiency

by the following conversion factor from Table E3 of SAP 2005, rounding down to the

nearest whole number.

This product uses fuel effect pieces and burner compartment walls containing

Refractory Ceramic Fibres (RCF), which are man-made vitreous silicate fibres.

Excessive exposure to these materials may cause irritation to eyes, skin and

respiratory tract. Consequently, it is important to take care when handling these

articles to ensure that the release of dust is kept to a minimum. To ensure that the

release of fibres from these RCF articles is kept to a minimum, during installation

and servicing we recommend that you use a HEPA filtered vacuum to remove any

dust and soot accumulated in and around the fire before and after working on the

fire. When replacing these articles we recommend that the replaced items are not

broken up, but are sealed within a heavy duty polythene bag, clearly labelled as

RCF waste. RCF waste is classed as a stable, non-reactive hazardous waste and

may be disposed at a landfill licensed to accept such waste. Protective clothing is

not required when handling these articles, but we recommend you follow the

normal hygiene rules of not smoking, eating or drinking in the work area and

always wash your hands before eating or drinking. This appliance does not contain

any component manufactured from asbestos or asbestos related products.

Page 6

INSTALLER GUIDE

Gas Conversion factor from net to gross efficiency

Natural Gas 0.901

LPG 0.921

*When converted using kit 0595211.

The appliance data label is located on a plate at the base of the fire. This can be seen by

removing the firefront casting / firefront.

3. GENERAL INSTALLATION REQUIREMENTS

3.1 The installation must be in accordance with these instructions.

For the user’s protection, in the United Kingdom it is the law that all gas appliances are

installed by competent persons in accordance with the current edition of the Gas Safety

(Installation and Use) Regulations. Failure to install the appliance correctly could lead

to prosecution. The Council for the Registration of Gas Installers (CORGI) requires its

members to work to recognised standards.

In the United Kingdom the installation must also be in accordance with:

All the relevant parts of local regulations.

All relevant codes of practice.

The relevant parts of the current editions of the following British Standards:-

BS 715

BS EN 1856 Part 1

BS EN 1858 which replaces BS 1289 Part 1

BS EN 1806 which replaces BS 1289 Part 2

BS EN 1856 Part 1 which replaces BS 4543 Part 2

Page 7

INSTALLER GUIDE

Gas Natural (G20) Propane (G31) *

Inlet Pressure 20mbar 37mbar

Input - Max. (Gross) 6.8kW (23,400 Btu/h) 6.7kW (22,860 Btu/h)

Input - Min. (Gross) 2.3kW (7,850 Btu/h) 4.0kW (13,650 Btu/h)

Inlet Test Pressure (Cold) 20.0 ± 1.0mbar (8.0 ± 0.4in

w.g.)

37.0 ± 1.0 mbar (14.85 ±

0.4in w.g.)

Gas Connection 8mm pipe 8mm pipe

Burner Injector Stereomatic Cat 82 - 074 Stereomatic Size 132

Pilot & Atmosphere Sensing

Device Copreci Ref. O.D.S

21500/166

Copreci Ref. O.D.S

21500/166 Fitted with RBM

180 -02 injector

Ignition Integral piezo (Mounted on

gas valve)

Integral piezo (Mounted on

gas valve)

Aeration See section 17.1 Non-adjustable

BS 5440 Part 1

BS 5440 Part 2

BS 6461 Part 1

BS 1251

BS EN 1806

BS 5871 Part 2

BS 6891

BS 8303

In England and Wales, the current edition of the Building Regulations issued by the

Department of the Environment and the Welsh Office

In Scotland, the current edition of the Building Standards (Scotland) Regulations issued

by the Scottish Executive.

In Northern Ireland, the current edition of the Building regulations (Northern Ireland)

issued by the Department of

the Environment for Northern Ireland.

In the republic of Ireland the installation must be carried out by a competent person and

also conform to the relevant parts of:

a) The current edition of IS 813 “Domestic Gas Installations”

b) All relevant national and local rules in force.

Where no specific instructions are given, reference should be made to the relevant

British Standard Code of Practice.

3.2 In the United

Kingdom, as supplied,

the appliance can be

installed in the following

situations: -

3.2.1 To a fireplace

complete with surround

and hearth as shown in

figure 1 and complying

with BS1251 after

removal of the fireback

and sufficient material

behind the fireback for a

debris catchment space.

The required fireplace,

hearth, debris catchment

area and clearance

dimensions are shown in

figure 1.

Page 8

INSTALLER GUIDE

Figure 1. Hearth and fireplace opening dimensions

3.2.1.1 ‘Hole-in-the-wall’ Installations

It is recommended that a hearth should be installed as in section 3.9 (See figure 1).

If a hearth is not fitted or a reduced depth hearth is fitted, the fire must be installed

so that the distance from the base of the fireplace opening in the wall to the finished

floor level is at least 100mm. Where there is no floor covering or carpet and the floor is

of a type that is likely to be covered in such a way in the future then the distance from

the base of the fireplace opening in the wall to the floor level should be increased to at

least 175mm.

To protect from the risk of burns and ignition of clothing a tactile separator shall be

used. The hearth detailed in section 3.9 meets the requirements for a tactile separator. If

this is not used then a 672mm long fender, kerb, horizontal bar, or other barrier, being

fixed not less than 50mm above floor level and positioned 300mm in front of the fixing

plane of the fire will meet the requirement.

! If the lower part of the fascia (the firefront) is free standing, the recommended

reduced hearth depth is 100mm.

This is necessary to support the

firefront (See figure 5 for

appliance dimensions).

3.2.2 To a fireplace

incorporating a metal flue box

complying with the

constructional requirements of

the current edition of BS EN

1856 Part 1. The dimensions of

the flue box must conform to

those shown in figure 2.

Page 9

INSTALLER GUIDE

Figure 2. Metal flue box dimensions

3.2.3 To a precast concrete or

clay flue block system

conforming to BS1289 or BS

EN 1806 with dimensions as in

figure 3. The current versions

of BS1289 and BS EN 1806

recommend that there should be

an air space or insulation

between the flue blocks and the

plaster because heat transfer

may cause cracking on directly

plastered flues. However,

generally this appliance is

suitable for installations under

all circumstances unless there is

a history of cracking problems.

Remember that faults such as

cracking may be caused by

poorly built and restrictive

flues, e.g. mortar extrusions,

too many bends, flue heights

below three metres, restrictive

terminations etc.

3.2.4 If the fireplace opening is

greater than the acceptable

dimensions given in this guide,

do not use the back of a fire

surround or marble to reduce

the opening. This may cause

cracking of the surround back

or marble.

3.3 Suitable flues and minimum flue sizes are as follows: -

It should be noted that, as with many appliances, sharp bends or horizontal runs in

metal flues at the top of the system can be a cause of problems in these types of

installation.

! 225mm x 225mm conventional brick flue.

! 175mm diameter lined brick or stone flue.

! 200mm diameter factory made insulated flue manufactured to BS4543.

! 175mm diameter flue pipe. See BS6461 Part 1 for suitable materials.

! Single wall, twin wall or flexible flue liner with a minimum diameter of 125mm.

Page 10

INSTALLER GUIDE

Figure 3.Precast or clay flue block system

Inhaltsverzeichnis

Andere Baxi Fires Division Kamin im Innenbereich Handbücher

Baxi Fires Division

Baxi Fires Division 956 Montageanleitung

Baxi Fires Division

Baxi Fires Division Sonnet Plus Montageanleitung

Baxi Fires Division

Baxi Fires Division 750 Bedienungsanleitung

Baxi Fires Division

Baxi Fires Division 939 Montageanleitung

Baxi Fires Division

Baxi Fires Division 341 Black Beauty Slimline Bedienungsanleitung

Baxi Fires Division

Baxi Fires Division 746 monaco Bedienungsanleitung

Baxi Fires Division

Baxi Fires Division Dream BR660VA Montageanleitung

Baxi Fires Division

Baxi Fires Division 755 Bedienungsanleitung

Baxi Fires Division

Baxi Fires Division soraya 747 Bedienungsanleitung

Baxi Fires Division

Baxi Fires Division 347 BLACK BEAUTY Bedienungsanleitung

Baxi Fires Division

Baxi Fires Division Soraya 746 Bedienungsanleitung

Baxi Fires Division

Baxi Fires Division 754 Bedienungsanleitung

Baxi Fires Division

Baxi Fires Division 339 Bedienungsanleitung

Baxi Fires Division

Baxi Fires Division 754 Montageanleitung

Baxi Fires Division

Baxi Fires Division 742 Montageanleitung

Baxi Fires Division

Baxi Fires Division 347 Bedienungsanleitung

Baxi Fires Division

Baxi Fires Division 739 Montageanleitung

Baxi Fires Division

Baxi Fires Division 742 Bedienungsanleitung

Baxi Fires Division

Baxi Fires Division 740FS Montageanleitung

Baxi Fires Division

Baxi Fires Division 740FS Bedienungsanleitung

Baxi Fires Division

Baxi Fires Division 949 Bedienungsanleitung

Baxi Fires Division

Baxi Fires Division 750 Montageanleitung

Baxi Fires Division

Baxi Fires Division 750 Bedienungsanleitung

Baxi Fires Division

Baxi Fires Division 661 Anthem Bedienungsanleitung

Beliebte Kamin im Innenbereich Handbücher anderer Marken

Brigantia

Brigantia 35-DVRS31N-2 Betriebsanleitung

Nordpeis

Nordpeis Bergen Bedienungsanleitung

Superior

Superior BCT2536TMN Bedienungsanleitung

Quadra-Fire

Quadra-Fire 5100I-GD-B Bedienungsanleitung

Renaissance

Renaissance RUMFORD 1000 Bedienungsanleitung

Lacunza

Lacunza IV-800 Bedienungsanleitung

Baxi

Baxi 940 Gebrauchsanweisung

Dru

Dru Maestro 60/2 Tall RCH Bedienungsanleitung

Diamond Fireglass

Diamond Fireglass SS-O22 Bedienungsanleitung

HearthStone

HearthStone Windsor Bay 8830 Programmierhandbuch

Napoleon

Napoleon ASCENT B42 Bedienungsanleitung

Enviro

Enviro E33GI Bedienungsanleitung

Smeg

Smeg L30 FABE Montageanleitung

KEDDY

KEDDY K700 Bedienungsanleitung

Godin

Godin 3451 Bedienungsanleitung

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Bedienungsanleitung

Desa

Desa CCFPDFT Bedienungsanleitung

Miles Industries

Miles Industries Vogue 1300IRN Handbuch