Baxter DOSEEDGE Gebrauchsanweisung

Setting Up the PrepStation Cart

M00205 v1.1

Table of Contents

SETTING UP THE PREPSTATION CART

M00205 v1.1

TABLE OF CONTENTS

UNPACKING THE PREPSTATION CART AND COMPONENTS....................................................... 1

SETTING UP THE CART.............................................................................................................. 2

SETTING UP THE TOUCHSCREEN AND CABLES .......................................................................... 3

SETTING UP THE PRINTER ........................................................................................................ 6

Setting Up the Zebra Printer............................................................................................... 6

Setting Up the Epson Printer .............................................................................................. 7

SETTING UP THE OTHER COMPONENTS ................................................................................... 8

Unpacking the PrepStation Cart and Components

SETTING UP THE PREPSTATION CART

M00205 v1.1 Page 1

UNPACKING THE PREPSTATION CART AND COMPONENTS

1. Remove all parts from the carton.

NOTE: The cable guide is not shown.

2. Unpack all components, power cables and connecting cables:

•Uninterruptible power supply (UPS)

•Touchscreen monitor and cables

•Label printer and cables

•Barcode scanner

•Foot pedal (optional)

•Scale (optional)

Setting Up the PrepStation Cart

SETTING UP THE PREPSTATION CART

M00205 v1.1 Page 2

SETTING UP THE CART

1. Remove the cover

from the box at the

base of the cart.

2. Insert the UPS in

the rear

compartment of

the box. Thread the

power cable

through the hole in

the base.

3. Do not replace the

cover on the box

yet. Do not plug in

the UPS.

4. Set the platform on

the base so the

screw holes are

aligned.

5. From below, insert

and tighten 5

screws.

Setting Up the Touchscreen and Cables

SETTING UP THE PREPSTATION CART

M00205 v1.1 Page 3

SETTING UP THE TOUCHSCREEN AND CABLES

1. Align the touchscreen supports

with its brace on the cart.

Insert and tighten 4 screws.

Tip! Install the top screws first.

2. Place the power supply units

for all components in the front

compartment of the power

box.

3. Plug each power cord into the

UPS.

4. Thread the cords through the

whole in the bottom of the

power box.

Tip! Make sure the cables are

untangled and unimpeded.

Setting Up the Touchscreen and Cables

SETTING UP THE PREPSTATION CART

M00205 v1.1 Page 4

5. Insert the cable guide in the

top of the tower until it pokes

out the bottom.

6. Snag the cords with the cable

guide.

Tip! Pull all cords together at

one time. Pulling the cords

individually is more difficult.

Setting Up the Touchscreen and Cables

SETTING UP THE PREPSTATION CART

M00205 v1.1 Page 5

7. Draw the cable guide through

the tower until the cords are

amply threaded through the

opening.

Tip! It is better to have too

much available cord than too

little.

8. Tilt the touch-screen up.

Connect the power cord or USB

cable (depending on model) to

the monitor. Make sure the

cord hangs loosely.

Tip! Push any excess cable in

the hole on the upright, but

not so much that the cords are

pulled tight when the monitor

is tilted up. The cables should

be slack, but not messy.

CAUTION!

Taut cables can snap

when the touchscreen

is raised.

Setting Up the Printer

SETTING UP THE PREPSTATION CART

M00205 v1.1 Page 6

SETTING UP THE PRINTER

SETTING UP THE ZEBRA PRINTER

1. Place the printer on the

platform. Connect the power

cord (threaded through the

post) to the printer.

2. Connect the USB or parallel

cable (depending on model)

to the printer, and then to the

touchscreen.

Setting Up the Printer

SETTING UP THE PREPSTATION CART

M00205 v1.1 Page 7

SETTING UP THE EPSON PRINTER

1. Place the printer on the

platform. Connect the power

cord (threaded through the

post) to the printer.

2. Connect the cable to the

printer, and then to the

touchscreen.

Setting Up the Other Components

SETTING UP THE PREPSTATION CART

M00205 v1.1 Page 8

SETTING UP THE OTHER COMPONENTS

1. Connect the scanner to the

touchscreen.

2. Place the scanner in its

holder, then position the

scanner in the hood.

Inhaltsverzeichnis

Andere baxter Medizinische Geräte Handbücher

baxter

baxter Colleague 3 Bedienungsanleitung

baxter

baxter Hillrom Proqressa+ Bedienungsanleitung

baxter

baxter ExtraPure Bedienungsanleitung

baxter

baxter TruSystem 7000 Bedienungsanleitung

baxter

baxter EASYSPRAY Bedienungsanleitung

baxter

baxter Ipump Bedienungsanleitung

baxter

baxter ZeoSys CONTRAfluran Bedienungsanleitung

baxter

baxter DUPLOSPRAY Bedienungsanleitung

baxter

baxter AK 98 Bedienungsanleitung

baxter

baxter EASYSPRAY Bedienungsanleitung

baxter

baxter EASYSPRAY Bedienungsanleitung

baxter

baxter Flo-Gard 6201 Bedienungsanleitung

baxter

baxter artis Bedienungsanleitung

baxter

baxter Colleague 3 Bedienungsanleitung

baxter

baxter iLED 7 Bedienungsanleitung

baxter

baxter EASYSPRAY Bedienungsanleitung

baxter

baxter prismaflex HP-X Bedienungsanleitung

baxter

baxter 2M91617A Bedienungsanleitung

baxter

baxter 6060 2M9832 Bedienungsanleitung

baxter

baxter PrisMax V2 Bedienungsanleitung

baxter

baxter EASYSPRAY Bedienungsanleitung

baxter

baxter DUPLOSPRAY Bedienungsanleitung

baxter

baxter EASYSPRAY Bedienungsanleitung

baxter

baxter ARENA Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

Medipost-Nutristoma

Medipost-Nutristoma MD300K2 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

FujiFilm

FujiFilm Sonart Betriebsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

baxter DOSEEDGE Gebrauchsanweisung

Beliebte Medizinische Geräte Handbücher anderer Marken