BC Biomedical IPA-2000 Bedienungsanleitung
i
User Manual
Manual 2000S01
Copyright © 2002
Revision 8
October 2003
IPA-2000S
Infusion Pump Analyzer
with Safety Analyzer
IPA-2000
Infusion Pump Analyzer
ii
LIMITED WARRANTY
NOTICES
INTRINTR
INTRINTR
INTRODUCTIONODUCTION
ODUCTIONODUCTION
ODUCTION
NOTICES
WARRANTY: BC Biomedical warrants its new products to be free from defects in
materials and workmanship under the service for which they are intended. This warranty
is effective for twelve months from the date of shipment.
EXCLUSIONS: This warranty is in lieu of any other warranty, expressed or implied;
including, but not limited to, any implied warranty of merchantability or fitness for a
particular purpose.
BC Biomedical is not liable for any incidental or consequential damages.
No person other than an officer is authorized to give any other warranty or assume any
liability.
REMEDIES: The purchaser’s sole and exclusive remedy shall be:
(1) The repair or replacement of defective parts or products.
(2) At the discretion of BC Biomedical, the refund of the purchase price.
Specifications and information contained in this document are for informational use
only and are subject to change without notice. This material should in no way be
construed as a commitment by BC Biomedical. It has been checked carefully and is
believed to be correct. However, no responsibility or liability for any errors or
inaccuracies is assumed by BC Biomedical.
The unit covered by this manual is for routine maintenance only. It is not to be used for
calibration.
iii
PRODUCTS COVERED BY MANUAL
INTRODUCTIONINTRODUCTION
INTRODUCTIONINTRODUCTION
INTRODUCTION
NOTICES
This manual gives a comprehensive overview of all the available features for the IPA-
2000 Series of products. Some of the sections and information are not applicable to
every product.
IPA-2000S: This product includes the Infusion Pump Analyzer and the Safety Analyzer.
All portions of this manual are applicable.
IPA-2000: This product includes only the Infusion Pump Analyzer. The portions of this
manual referring to the Safety Analyzer are not applicable.
DOCUMENT REVISION RECORD:
REVISION DATE PROGRAM VERSION CHANGES
1 7/02 DT7310CB 1.2 Beta Version Release
2 10/02 DT7310CD (2000S) 1.4 (2000S) Specifications Updated
DT7315CA (2000) 1.1 (2000) 2000 References
3 1/03 DT7310CF (2000S) 1.6 (2000S) Specifications Updated
DT7315CC(2000) 1.3 (2000) Editing Updates
4 4/03 DT7310CG(2000S) 1.7(2000S) Priming, Purging and
DT7315CD(2000) 1.4(2000) Editing Updates
5 5/03 DT7310CH(2000S) 1.8(2000S) Editing
DT7315CE(2000) 1.5(2000) Updates
6 6/03 DT7310CI(2000S) 1.9(2000S) Alarm List Adjusted
DT7315CF(2000) 1.6(2000)
7 7/03 DT7310CJ(2000S) 1.10(2000S) Specifications Updated
DT7310CF(2000) 1.6(2000)
8 10/03 DT7310CK(2000S) 1.11(2000S) Line Voltage, Baud
DT7310CF(2000) 1.6(2000) Rate and Alarm Scan
P:\Manuals\BCGroup\---\7310_rev08_---.pmd
iv
TABLE OF CONTENTS
INTRINTR
INTRINTR
INTRODUCTIONODUCTION
ODUCTIONODUCTION
ODUCTION
TABLE OF CONTENTS
Part 1 About the IPA-2000 Series A general overview of the System....................
Infusion Pump Analyzer Overview.....................
Safety Analyzer Overview.....................................
Instrument Overview
Instrument Physical Overview..............................
Unit Front
-
Panel...................................................
Unit Front
-
Panel Controls....................................
Unit Back
-
Panel...................................................
Module
Front
-
Panel.............................................
Module Back
-
Panel
.
.............................................
Commercial and Main Screen
.
............................
Connections
Connections Overview
.
........................................
Module Connection
.
.............................................
Printer Connection
.
..............................................
Keyboard Connection
.
..........................................
Computer Connection..........................................
Infusion Pump Analyzer
/
DUT Connection
.
........
Safety Analyzer
/
DUT Connection
.
.....................
Specifications
.
...........................................................
1-1
1-3
1-4
1-5
1-6
1-7
1-9
1-10
1-11
1-12
1-13
1-14
1-15
1-16
1-17
1-18
1-20
1-21
v
Part 2 General Operations A step by step walk through of the operations...........
that support the running and processing of
the tests.
Administration Setup
Administration Setup Overview
...........................
Administration Setup
...........................................
User Setup
User Setup Overview
..........................................
User Setup
..........................................................
Model Selection
Model Selection Overview
...................................
Model Selection...................................................
Priming
Priming Overview
................................................
Priming ...............
................................................
Purging
Purging Overview
................................................
Purging
................................................................
Datalog
Datalog Overview
................................................
Printing Reports
Printing Reports Overview
..................................
Automatically Printing Reports............................
Manually Printing Reports Overview....................
Manually Printing Reports....................................
INTRINTR
INTRINTR
INTRODUCTIONODUCTION
ODUCTIONODUCTION
ODUCTION
2-1
2-2
2-3
2-9
2-10
2-16
2-18
2-23
2-25
2-28
2-29
2-31
2-33
2-34
2-35
2-36
TABLE OF CONTENTS
vi
System Memory Overview
...................................
Alarm Overview
.......................................................
Flash
Flash Overview
.
..................................................
Flashing Files
.
.....................................................
2-38
2-39
2-42
2-44
INTRINTR
INTRINTR
INTRODUCTIONODUCTION
ODUCTIONODUCTION
ODUCTION
TABLE OF CONTENTS
vii
INTRODUCTIONINTRODUCTION
INTRODUCTIONINTRODUCTION
INTRODUCTION
Part 3 Infusion Analyzer--Flow Mode A step by step walk through of ................
running an Infusion Analyzer
Flow or Flow--PCA test.
Infusion Analyzer--Flow
Flow Test Overview
.............................................
Getting Ready for a Flow Test.............................
Running a Flow Test............................................
Datalog Sample for Flow Test.............................
Infusion Analyzer--Flow--PCA
Flow--PCA Test Overview
...................................
Getting Ready for a Flow--PCA Test
...................
Running a Flow--PCA Test..................................
Datalog Sample for Flow--PCA Test
..................
Datalog--Flow Test
Flow Test Datalog Overview................................
Flow Test Datalog................................................
3-1
3-2
3-4
3-6
3-8
3-9
3-11
3-13
3-16
3-17
3-18
TABLE OF CONTENTS
viii
Infusion Analyzer--Distal Occlusion
Distal Occlusion Test Overview
..........................
Getting Ready for a Distal Occlusion Test
..........
Running a Distal Occlusion Test.........................
Datalog Sample for a Distal Occlusion Test
.......
Infusion Analyzer--Proximal Occlusion
Proximal Occlusion Test Overview
.....................
Getting Ready for a Proximal Occlusion Test
.....
Running a Proximal Occlusion Test....................
Datalog--Occlusion
Occlusion Test Datalog Overview
.......................
Occlusion Test Datalog.......................................
Part 4 Infusion Analyzer--Occlusion Mode A step by step walk through..........
of running a Distal or Proximal
Occlusion test.
INTRODUCTIONINTRODUCTION
INTRODUCTIONINTRODUCTION
INTRODUCTION
4-1
4-2
4-4
4-6
4-8
4-9
4-10
4-11
4-12
4-13
TABLE OF CONTENTS
ix
Safety Analyzer--Manual Mode
Manual Test Overview
.........................................
Getting Ready for a Manual Test
.........................
Running a Manual Test........................................
Part 5 Safety Analyzer--Manual Mode A step by step walk through of
.
..............
running a Manual Safety
Analyzer test.
Part 6 Safety Analyzer--Automatic Mode A step by step walk through
............
of running an Automatic Safety
Analyzer test.
Safety Analyzer--Automatic Mode
Automatic Test Overview.........................
Getting Ready for an Automatic Test.......
Running an Automatic Test
.....................
Datalog Sample for an Automatic Test....
Datalog--Safety Analyzer
Safety Analyzer Datalog Overview
......................
Safety Analyzer Datalog......................................
INTRINTR
INTRINTR
INTRODUCTIONODUCTION
ODUCTIONODUCTION
ODUCTION
5-1
5-2
5-3
5-4
6-1
6-2
6-3
6-4
6-15
6-16
6-17
TABLE OF CONTENTS
x
This Page Intentionally Left Blank.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere BC Biomedical Messgerät Handbücher
BC Biomedical
BC Biomedical SA-2500 Bedienungsanleitung
BC Biomedical
BC Biomedical SA-2000-INTL Bedienungsanleitung
BC Biomedical
BC Biomedical SA-2010S Bedienungsanleitung
BC Biomedical
BC Biomedical USP-100A Bedienungsanleitung
BC Biomedical
BC Biomedical DPM-2001 Bedienungsanleitung
BC Biomedical
BC Biomedical SPO-2000 Bedienungsanleitung
BC Biomedical
BC Biomedical DPM-2350 SERIES Bedienungsanleitung
BC Biomedical
BC Biomedical ESU-2400 Bedienungsanleitung
BC Biomedical
BC Biomedical SA-2010 Bedienungsanleitung
BC Biomedical
BC Biomedical USP-30 Bedienungsanleitung
