BC Biomedical SPO-2000 Bedienungsanleitung

PULSE

OXIMETRY

SIMULATOR

SPO-2000 SYSTEM

USER MANUAL

WARNINGS, CAUTIONS, NOTICES...............................................................................ii

DESCRIPTION............................................................................................................. 1

LAYOUT....................................................................................................................... 2

KEYS............................................................................................................................ 3

LED INDICATORS....................................................................................................... 4

OPERATIONS.............................................................................................................. 5

MANUAL REVISIONS.................................................................................................. 6

LIMITED WARRANTY ................................................................................................. 6

SPECIFICATIONS ....................................................................................................... 7

NOTES......................................................................................................................... 8

BC BIOMEDICAL

SPO-2000 SYSTEM

TABLE OF CONTENTS

CAUTION - SERVICE

The SPO-2000 System is intended to be serviced

only by authorized service personnel.

Troubleshooting and service procedures should

only be performed by qualified technical

personnel.

CAUTION - CLEANING

Do not immerse. The SPO-2000 System should

be cleaned by wiping gently with a damp, lint-free

cloth. A mild detergent can be used if desired.

WARNING - USERS

The SPO-2000 System is for use by

skilled technical personnel only.

WARNING - USE

The SPO-2000 System is intended for testing only

and should never be used in diagnostics,

treatment or any other capacity where it would

come in contact with a patient.

WARNING –LIQUIDS

Do not submerge or spill liquids on the SPO-2000

System. Do not operate the SPO-2000 System if

internal components not intended for use with

fluids may have been exposed to fluid, as the

internal leakage may have caused corrosion and

be a potential hazard.

WARNING - MODIFICATIONS

The SPO-2000 System is intended for use within

the published specifications. Any application

beyond these specifications or any unauthorized

user modifications may result in hazards or

improper operation.

iii

NOTICE –SYMBOLS

Symbol

Description

Center Negative

NOTICE –ABBREVIATIONS

BPM

Beats Per Minute

Celsius

Degree(s)

DUT

Device Under Test

Fahrenheit

kilogram(s)

LED

Light Emitting Diode

milliampere(s)

millimeter(s)

Lbs

pounds

USA

United States of America

VDC

Volts Direct Current

CAUTION - ENVIRONMENT

Exposure to environmental conditions outside

the specifications can adversely affect the

performance of the SPO-2000 System. If the

SPO-2000 System is outside of Operating

specifications, allow it to acclimate to specified

conditions for at least 30 minutes before

attempting to operate it.

CAUTION - INSPECTION

The SPO-2000 System should be inspected

before each use for wear and should be serviced

if any parts are in question.

www.bcgroupintl.com Made in the USA

04/12 Rev 04

NOTICE –DISCLAIMER

BC GROUP INTERNATIONAL, INC. RESERVES THE RIGHT TO

MAKE CHANGES TO ITS PRODUCTS OR SPECIFICATIONS AT

ANY TIME, WITHOUT NOTICE, IN ORDER TO IMPROVE THE

DESIGN OR PERFORMANCE AND TO SUPPLY THE BEST

POSSIBLE PRODUCT. THE INFORMATIONINTHIS MANUAL HAS

BEEN CAREFULLY CHECKED AND IS BELIEVED TO BE

ACCURATE. HOWEVER, NO RESPONSIBILITY

IS ASSUMED FOR INACCURACIES.

NOTICE –CONTACT INFORMATION

BC BIOMEDICAL

BC GROUP INTERNATIONAL, INC.

3081 ELM POINT INDUSTRIAL DRIVE

ST. CHARLES, MO 63301

USA

1-800-242-8428

1-314-638-3800

www.bcgroupintl.com

sales@bcgroupintl.com

NOTICE –DISCLAIMER

BC GROUP INTERNATIONAL, INC. WILL NOT BE RESPONSIBLE

FOR ANY INJURIES SUSTAINED DUE TO UNAUTHORIZED

EQUIPMENT MODIFICATIONSORAPPLICATION OFEQUIPMENT

OUTSIDE OF THE PUBLISHED INTENDED USE AND

SPECIFICATIONS.

The SPO-2000 System is used to verify the operation of Pulse Oximeters. The SPO-2000

System is comprised of the SPO-2000 Base Unit and a FingerSim™simulated finger,

available in three different SpO2 saturation levels. The FingerSim™is inserted into the

SPO-2000 Base Unit, which then adds calibrated pulse rates to the functionality of the

FingerSim™.

The following are highlights of some of the main features.

SPO-2000 SYSTEM (BASIC FEATURES):

SIX CALIBRATED SIMULATOR PULSE RATES: 30, 60, 90, 120, 150, and 180

BPM

LED INDICATION OF SELECTED PULSE RATE

STANDBY MODE

AVAILABLE MODELS:

The SPO-2000 Base Unit plus one or more FingerSims™arerequiredinordertoverifythe

operation of Pulse Oximeters.

SPO-2000 SIMULATOR BASE UNIT

FingerSim™ KIT COMPLETESTARTERKIT(INCLUDES80%,90%AND

97% FingerSims™, FingerSim™ HOLDER, AND

CARRYING CASE)

FingerSim™ SET REPLACEMENT KIT (80%, 90% AND 97%

FingerSims™ ONLY)

STANDARD ACCESSORIES:

BC20-00431 110V AC POWER ADAPTER (US)

(OR)

BC20-40614 220V AC POWER ADAPTER (EURO)

OPTIONAL ACCESSORIES:

BC20-40110 CARRYING CASE FOR SPO-2000 BASE UNIT,

FingerSims™& ACCESSORIES

BC BIOMEDICAL

SPO-2000 SYSTEM

PULSE OXIMETRY SIMULATOR SYSTEM

This section looks at the layout of the SPO-2000 Base Unit and gives descriptions of the

elements that are present.

LAYOUT

2 Light Touch Keys

•ACTIVE/STANDBY for

enabling/disabling Pulse Simulation

•SCROLL for selecting the

Pulse Simulation rate.

FingerSim™Receptacle

(NOTE –FingerSim™is

shown installed for reference).

Connector for Power

Adapter

ON/OFF Switch

6 LED indicators for

Indicating Pulse

Simulation rate (BPM)

• 180 BPM

• 150 BPM

• 120 BPM

• 90 BPM

• 60 BPM

• 30 BPM

2 LEDs for Indicating Status

• ACTIVE for showing when Pulse

Simulation is active.

• POWER for showing when the

SPO-2000 Base Unit is On.

2 soft touch keys are provided for Base Unit operation:

–This key is used to turn the SPO-2000 Base Unit Pulse Simulation ON and OFF.

–This key is used to select the desired Pulse Simulation rate.

KEYS

There are eight LEDs to indicate the status of the Base Unit. They are marked POWER,

ACTIVE, 30, 60, 90, 120, 150, AND 180.

POWER –This LED indicates that the Base Unit power switch is turned ON and the

onboard power supply is functioning properly.

ACTIVE–This LED indicates that the Base Unit is in the ACTIVE mode, meaning Pulse

Simulation is activated. STANDBY mode is indicated by an active POWER LED and

inactive ACTIVE LED.

30 –This LED indicates that the currently selected Pulse Simulation rate is 30 BPM.

NOTE: This is the default Pulse Simulation rate when the Base Unit is first powered.

60 –This LED indicates that the currently selected Pulse Simulation rate is 60 BPM.

90 –This LED indicates that the currently selected Pulse Simulation rate is 90 BPM.

120 –This LED indicates that the currently selected Pulse Simulation rate is 120 BPM.

150 –This LED indicates that the currently selected Pulse Simulation rate is 150 BPM.

180 –This LED indicates that the currently selected Pulse Simulation rate is 180 BPM.

LED INDICATORS

Andere Handbücher für SPO-2000

Inhaltsverzeichnis

Andere BC Biomedical Messgerät Handbücher

BC Biomedical

BC Biomedical DA-2006 Bedienungsanleitung

BC Biomedical

BC Biomedical SPO-2000 Bedienungsanleitung

BC Biomedical

BC Biomedical DPM-2350 SERIES Bedienungsanleitung

BC Biomedical

BC Biomedical SA-2000-INTL Bedienungsanleitung

BC Biomedical

BC Biomedical DPM-2001 Bedienungsanleitung

BC Biomedical

BC Biomedical SA-2010S Bedienungsanleitung

BC Biomedical

BC Biomedical USP-30 Bedienungsanleitung

BC Biomedical

BC Biomedical SA-2010S Bedienungsanleitung

BC Biomedical

BC Biomedical PFC-3000 SERIES Bedienungsanleitung

BC Biomedical

BC Biomedical SA-2010 Bedienungsanleitung

BC Biomedical

BC Biomedical ESU-2400 Bedienungsanleitung

BC Biomedical

BC Biomedical IPA-2000 Bedienungsanleitung

BC Biomedical

BC Biomedical SA-2500 Bedienungsanleitung

BC Biomedical

BC Biomedical USP-100A Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung